J.I. Case 811-B Row-Crop tractor Technical Specifications
J.I. Case 811-B is a Row-Crop tractor that was produced by the John Deere between 1958 – 1960.
Below you will find detailed technical specifications for J.I. Case 811-B covering engine types, horsepower ratings, weight, height, fuel type and tank volume, oil capacity and type, hydraulic system diagram, wiring diagram, battery specs, etc.
J.I. Case 811-B Production
| Manufacturer: | |
| Manufacturer | J.I. Case |
| Row-Crop tractor | |
| Built in Racine, Wisconsin, USA | |
| Original price | $4,800 (1960) |
| Engine: | 50.62 hp 37.7 kW |
| PTO (tested) | 55.58 hp 41.4 kW |
| Belt (tested) | 53.90 hp 40.2 kW |
J.I. Case 811-B Mechanical
| Two-wheel drive | |
| Steering | power |
| Differential mechanical disc brakes | |
| Open operator station. | |
J.I. Case 811-B Engine detail
| Engine Detail | |
| J.I. Case | |
| gasoline | |
| 4-cylinder | |
| liquid-cooled | |
| Displacement | 251 ci 4.1 L |
| Bore/Stroke | 4.00×5.00 inches 102 x 127 mm |
| Air cleaner | oil bath |
| Compression | 6.5:1 |
| Rated RPM | 1800 |
| Starter volts | 12 |
| Engine Oil | |||
| Transmission | Case-O-Matic |
| Type | torque converter |
| Gears | 8 forward and 2 reverse |
| Clutch | hydraulic wet disc |
| Four gears, plus reservse, in two ranges controlled with a single shift lever. Torque converter transmission with bypass to lock in direct drive. | |
J.I. Case 811-B Dimensions
| Wheelbase | 101.75 inches (wide front) 258 cm |
| 92.25 inches (tricycle) 234 cm | |
| Length | 152.75 inches (wide front) 387 cm |
| 143.375 inches (tricycle) 364 cm | |
| Width | 85.25 inches 216 cm |
| Height (hood) | 66 inches 167 cm |
| Operating weight | 6,775 lbs 3073 kg |
| Ballasted weight | 9,165 lbs 4157 kg |
| Front tread | 9.128 to 15.128 inches 23 to 38 cm (tricycle) |
| Front tread | 53 to 82 inches 134 to 208 cm |
| Rear tread | 52 to 88 inches 132 to 223 cm |
| Rear tread | 52 to 96 inches 132 to 243 cm (PAVT) |
| Rear tread | 52 to 108 inches 132 to 274 cm (long axle) |
| Rear tread | 52 to 116 inches 132 to 294 cm (PAVT long axle) |
J.I. Case 811-B Tests
| Nebraska Tractor Test 679 | |
| Gasoline 8-speed 2WD October 27 – November 17, 1958 Link: Nebraska Tractor Test 679 file | |
| Belt power (max) | 53.90 hp 40.2 kW |
| Belt fuel use (max) | 5.2 gal/hour 19.7 l/hour |
| Drawbar performance | |
| Max power | 43.83 hp 32.7 kW |
| Fuel use | 4.5 gal/hour 17.0 l/hour |
| Gear 4 used for power test. | |
| Max pull | 7,207 lbs 3269 kg |
| Gear 2 used for pull test. | |
| Nebraska Tractor Test 695 | |||
| Nebraska Tractor Test 695 | |
| LP gas 8-speed 2WD April 27 – May 16, 1959 Link: Nebraska Tractor Test 695 file | |
| PTO performance | |
| Power at rated engine speed | 55.58 hp 41.4 kW |
| Fuel use | 6.2 gal/hour 23.5 l/hour |
| Power at rated PTO speed | 48.88 hp 36.4 kW |
| Fuel use | 5.2 gal/hour 19.7 l/hour |
| Drawbar performance | |
| Max power | 50.62 hp 37.7 kW |
| Fuel use | 6.2 gal/hour 23.5 l/hour |
| Gear 4 used for power test. | |
| Max pull | 7,159 lbs 3247 kg |
| Gear 2 used for pull test. | |
FAQ
Is J.I. Case 811-B a good tractor?
The J.I. Case 811-B is one of the great tractors in the J.I. Case stable, and it has earned J.I. Case a fantastic reputation.
How much oil does a J.I. Case 811-B take?
Check out the J.I. Case 811-B oil capacity and oil type in the engine specs section as it may vary across the engines. Keep in mind, that older models might have their oil capacity increased over time. You may compare between the early and late oil capacity.
Do tractors have VIN numbers?
Every tractor has a VIN number. The number is usually engraved below the driver’s seat. Tractor manufacturers put the number in different places on the tractor body.
What was the last year J.I. Case made the ?
The J.I. Case 811-B was an agricultural tractor model made from 1958 – 1960
How much horsepower is a J.I. Case 811-B?
The engine tested at 50.62 hp
37.7 kW drawbar and 55.58 hp
41.4 kW kW PTO horsepower.
How much does a J.I. Case 811-B tractor weight?
Depending on the engine type, the J.I. Case 811-B weight ranges from 6,775 lbs
3073 kg .
How much can a J.I. Case 811-B Pull?
The max pulling capacity of the J.I. Case 811-B tractors starts at 7,207 lbs
3269 kg but may be slightly higher depending on the trim.