J.I. Case SC Technical Specifications
J.I. Case SC is a Row-Crop tractor that was produced by the John Deere between 1941 – 1954.
Below you will find detailed technical specifications for J.I. Case SC covering engine types, horsepower ratings, weight, height, fuel type and tank volume, oil capacity and type, hydraulic system diagram, wiring diagram, battery specs, etc.
J.I. Case SC Production
Manufacturer: | |
Manufacturer | J.I. Case |
Row-Crop tractor | |
Built in Racine, Wisconsin, USA | |
Total built | 58,991 |
Original price was $1,700 in 1955 |
Engine: | 27.68 hp 20.6 kW |
Belt (tested) | 31.71 hp 23.6 kW |
J.I. Case SC Mechanical
Two-wheel drive | |
Manual steering | |
Disc brakes | |
Open operator station. Steel pan seat with spring suspension. Padded seat with torsional rubber suspension after 1952. |
Tracktor Hitch
Type | Case Eagle Hitch |
Power Take-off (PTO)
Rear PTO | continuous |
live *After 1953 | |
Rear RPM | 540 *1.125 inch until 1943, 1.375 inch beginning at SN 4706368. |
J.I. Case SC Engine detail
Engine Detail | |
J.I. Case | |
distillate | |
4-cylinder | |
liquid-cooled vertical I-head | |
Displacement | 153.9 ci 2.5 L |
Bore/Stroke | 3.50×4.00 inches 89 x 102 mm |
Rated RPM | 1550 |
Coolant capacity | 16 qts 15.1 L |
Engine Oil |
Type | unsynchronized gear |
Gears | 4 forward and 1 reverse |
Clutch | mechanical wet disc |
J.I. Case SC Dimensions
Wheelbase | 83.5 inches 212 cm |
Length | 136.25 inches 346 cm |
Width | 76.6 inches 194 cm |
Height (hood) | 56.5 inches 143 cm |
Weight | 4200 lbs 1905 kg |
Clearance (rear axle) | 23.875 inches 60 cm |
Front tread | 56 to 80 inches 142 to 203 cm (wide front) |
Rear tread | 44 to 80 inches 111 to 203 cm |
Rear tread | 44 to 94 inches 111 to 238 cm (long axle) |
J.I. Case SC Tests
Nebraska Tractor Test 367 | |
2.5L distillate 4-speed 2WD April 29 – May 16, 1941 Link: Nebraska Tractor Test 367 file | |
Belt power (max) | 22.29 hp 16.6 kW |
Belt fuel use (max) | 2.3 gal/hour 8.7 l/hour |
Drawbar performance | |
Max power | 19.44 hp 14.5 kW |
Gear 2 used for power test. | |
Max pull | 3166 lbs 1436 kg |
Gear 1 used for pull test. |
Nebraska Tractor Test 496 | |||
Nebraska Tractor Test 496 | |
2.7L gasoline 4-speed 2WD June 15 – 20, 1953 Link: Nebraska Tractor Test 496 file | |
Belt power (max) | 31.71 hp 23.6 kW |
Belt fuel use (max) | 3.0 gal/hour 11.4 l/hour |
Drawbar performance | |
Max power | 27.68 hp 20.6 kW |
Gear 2 used for power test. | |
Max pull | 4072 lbs 1847 kg |
Gear 1 used for pull test. |
Nebraska Tractor Test 497 | |||
Nebraska Tractor Test 497 | |
2.7L tractor fuel 4-speed 2WD June 16 – 26, 1953 Link: Nebraska Tractor Test 497 file | |
Belt power (max) | 25.0 hp 18.6 kW |
Belt fuel use (max) | 2.9 gal/hour 11.0 l/hour |
Drawbar performance | |
Max power | 23.25 hp 17.3 kW |
Gear 2 used for power test. | |
Max pull | 3,226 lbs 1463 kg |
Gear 1 used for pull test. |
FAQ
Is J.I. Case SC a good tractor?
The J.I. Case SC is one of the great tractors in the J.I. Case stable, and it has earned J.I. Case a fantastic reputation.
How much oil does a J.I. Case SC take?
Check out the J.I. Case SC oil capacity and oil type in the engine specs section as it may vary across the engines. Keep in mind, that older models might have their oil capacity increased over time. You may compare between the early and late oil capacity.
Do tractors have VIN numbers?
Every tractor has a VIN number. The number is usually engraved below the driver’s seat. Tractor manufacturers put the number in different places on the tractor body.
What was the last year J.I. Case made the ?
The J.I. Case SC was an agricultural tractor model made from 1941 – 1954
How much does a J.I. Case SC tractor weight?
Depending on the engine type, the J.I. Case SC weight ranges from 4200 lbs
1905 kg .
How much can a J.I. Case SC Pull?
The max pulling capacity of the J.I. Case SC tractors starts at 3166 lbs
1436 kg but may be slightly higher depending on the trim.