John Deere 2020 Specs & Features

Contents show

John Deere 2020 Technical Specifications

John Deere 2020 is a Row-Crop tractor that was produced by the John Deere between 1967 – 1972.

Below you will find detailed technical specifications for John Deere 2020 covering engine types, horsepower ratings, weight, height, fuel type and tank volume, oil capacity and type, hydraulic system diagram, wiring diagram, battery specs, etc.

John Deere 2020 Production

Manufacturer:
Manufacturer:	John Deere
Type:	Row-Crop tractor
Factory:	Mannheim, Baden-Wurttemberg, Germany

John Deere 2020 Power

Engine:
Engine:	64 hp 47.7 kW

John Deere 2020 Engine
John Deere 3.3L 4-cyl diesel
Fuel tank:	19.6 gal 74.2 L

Mechanical
Chassis:	4×2 2WD
Final drives:	planetary
Differential lock:	mechanical rear
Steering:	manual
Steering:	power*Optional
Brakes:	hydraulic wet disc
Cab:	Open operator station.
Transmissions:	8-speed gear
	16-speed two-speed power shift

John Deere 2020 photos…

Hydraulics
Type:	closed center
Pressure:	2200 psi 151.7 bar
Pump flow:	10.7 gpm 40.5 lpm

Tractor hitch
Rear Type:	II/I
Control:	position and depth control
Rear lift:	2760 lbs 1251 kg

Power Take-off (PTO)
Rear PTO:	live
Rear RPM:	540 (1.375)
Engine RPM:	540@2100

Dimensions & Tires
Wheelbase:	85.8 inches 217 cm
Weight:	4750 lbs 2154 kg
Front tire:	7.50×16
Rear tire:	12×36
Full dimensions and tires …

2020 Serial Numbers
Location:	Serial number plate on the right side of the tractor frame, above the front axle.

John Deere 2020 Electrical

Charging system:	generator
Batteries:	2
Battery AH:	60

John Deere 2020 Mechanical

Chassis:

4×2 2WD

Final drives:

planetary

Differential lock:

mechanical rear

Steering:

manual

Steering:

power*Optional

Brakes:

hydraulic wet disc

Cab:

Open operator station.

Transmissions:

8-speed gear

16-speed two-speed power shift

Hydraulics

Type:	closed center
Pressure:	2200 psi 151.7 bar
Pump flow:	10.7 gpm 40.5 lpm

Tracktor Hitch

Rear Type:	II/I
Control:	position and depth control
Rear lift:	2760 lbs 1251 kg

Power Take-off (PTO)

Rear PTO:	live
Rear RPM:	540 (1.375)
Engine RPM:	540@2100

Title serial numbers

Location:	Serial number plate on the right side of the tractor frame, above the front axle.
photo of 2020 serial number

What year is my John Deere 2020? Serial Number Decoder

The serial number list shows the first tractor built in each year. The other tractors for that year will have successively higher numbers. Your serial number should be between two of the stated numbers.

The list only includes the numbers of the first tractors produced in each year. Your serial should be somewhere between two numbers.Unless you happen to be the first person to own a tractor, your number will not appear on the list.

John Deere 2020 Engine detail

Engine Detail
John Deere
diesel
4-cylinder
liquid-cooled
Displacement:	202.6 ci 3.3 L
Bore/Stroke:	3.86×4.33 inches 98 x 110 mm
Power:	64 hp 47.7 kW
Fuel system:	direct injection
Compression:	16.7:1
Rated RPM:	2500
Torque:	141 lb-ft 191.2 Nm
Torque RPM:	1500
Starter:	electric
Starter volts:	12

John Deere 2020 Transmission overview

Engine Oil

Type:	gear
Gears:	8 forward and 4 reverse

John Deere 2020 Dimensions

Wheelbase:	85.8 inches 217 cm
Length:	140.6 inches 357 cm
Width:	88.2 inches 224 cm
Height:	88.2 inches 224 cm
Shiping weight:	4750 lbs 2154 kg
Ground clearance:	13.8 inches 35 cm
Front tread:	49.6 to 81 inches 125 to 205 cm
Rear tread:	53.2 to 76.8 inches 135 to 195 cm

John Deere 2020 Tests

Nebraska Tractor Test 936

Nebraska Tractor Test 936
Gasoline 8-speed 2WD May 3 – 13, 1966 Link: Nebraska Tractor Test 936 file
PTO performance
Power at rated engine speed	53.91 hp 40.2 kW
Fuel use	4.8 gal/hour 18.2 l/hour
Power at rated PTO speed	48.32 hp 36.0 kW
Fuel use	4.1 gal/hour 15.5 l/hour
Drawbar performance
Max power	43.94 hp 32.8 kW
Fuel use	4.9 gal/hour 18.5 l/hour
Gear 5 used for power test.
Max pull	5697 lbs 2584 kg
Gear 2 used for pull test.

Nebraska Tractor Test 938

Nebraska Tractor Test 938
Diesel 8-speed 2WD May 7 – 17, 1966 Link: Nebraska Tractor Test 938 file
PTO performance
Power at rated engine speed	54.09 hp 40.3 kW
Fuel use	3.5 gal/hour 13.2 l/hour
Power at rated PTO speed	49.31 hp 36.8 kW
Fuel use	3.0 gal/hour 11.4 l/hour
Drawbar performance
Max power	45.90 hp 34.2 kW
Fuel use	3.6 gal/hour 13.6 l/hour
Gear 5 used for power test.
Max pull	5547 lbs 2516 kg
Gear 3 used for pull test.

FAQ

Is John Deere 2020 a good tractor?

The John Deere 2020 is one of the great tractors in the John Deere stable, and it has earned John Deere a fantastic reputation.

How much oil does a John Deere 2020 take?

Check out the John Deere 2020 oil capacity and oil type in the engine specs section as it may vary across the engines. Keep in mind, that older models might have their oil capacity increased over time. You may compare between the early and late oil capacity.

Do tractors have VIN numbers?

Every tractor has a VIN number. The number is usually engraved below the driver’s seat. Tractor manufacturers put the number in different places on the tractor body.

What was the last year John Deere made the 2020?

The John Deere 2020 was an agricultural tractor model made from 1967 – 1972

How much can a John Deere 2020 Pull?

The max pulling capacity of the John Deere 2020 tractors starts at 5697 lbs
2584 kg but may be slightly higher depending on the trim.

Where is the serial number on a John Deere 2020?

Lookup serial number plate on the right side of the tractor frame, above the front axle.