John Deere 2026R

John Deere 2026R Compact Utility tractor Technical Specifications

John Deere 2026R is a Row-Crop tractor that was produced by the John Deere between 2016 – .

Below you will find detailed technical specifications for John Deere 2026R covering engine types, horsepower ratings, weight, height, fuel type and tank volume, oil capacity and type, hydraulic system diagram, wiring diagram, battery specs, etc.

John Deere 2026R Production

Manufacturer: John Deere
Type: Compact Utility tractor

John Deere 2026R Electrical

Ground: negative
Charging system: alternator
Charging amps: 55
Battery CCA: 500
Battery volts: 12

John Deere 2026R Mechanical

Chassis: 4×4 MFWD 4WD
Final drives: spur gear
Differential lock: mechanical rear
Steering: power
Brakes: wet disc
Cab: Two-post folding ROPS. Cab optional.
Transmission: hydrostatic


Fuel: 6.3 gal
23.8 L
Hydraulic system: 3.8 gal
14.4 L


Type: open center
Capacity: 3.8 gal
14.4 L
Pressure: 2000 psi
137.9 bar
Pump flow: 3.7 gpm
14.0 lpm
Total flow: 7.4 gpm
28.0 lpm
Steering flow: 3.7 gpm
14.0 lpm

Tracktor Hitch

Rear Type: I
Rear lift (at ends): 1235 lbs
560 kg
Rear lift (at 24″/610mm): 882 lbs
400 kg

Power Take-off (PTO)

Rear PTO: independent
Clutch: wet disc
Rear RPM: 540 (1.375)
Mid PTO: independent
Mid RPM: 2100
Front PTO: independent*Optional
Front RPM: 2100

John Deere 2026R Engine detail

Engine Detail
Yanmar 3TNV76
Displacement: 68 ci
1.1 L
Bore/Stroke: 3.00×3.00 inches
76 x 76 mm
Rated Power (ECE R24): 23.8 hp
17.7 kW
Rated Power (EC 97/98): 25.2 hp
18.8 kW
Air cleaner: dry
Rated RPM: 3200
Torque: 47 lb-ft
63.7 Nm
Torque RPM: 1900
Starter: electric
Starter volts: 12
Oil capacity: 2.9 qts
2.7 L
Coolant capacity: 3.9 qts
3.7 L

John Deere 2026R Transmission overview

Engine Oil

Type: hydrostatic
Gears: infinite (2-range) forward and reverse

John Deere 2026R Dimensions

Wheelbase: 63 inches
160 cm
Length: 110.6 inches
280 cm
Width: 47.2 inches
119 cm
Height (ROPS): 93.1 inches
236 cm
Height (cab): 79 inches
200 cm

John Deere 2026R Weight
ROPS : 1676 lbs
760 kg
Cab : 2028 lbs
919 kg
Max capacity: 3774 lbs
1711 kg
Max front axle: 1349 lbs
611 kg
Max rear axle: 2425 lbs
1099 kg


Is John Deere 2026R a good tractor?

The John Deere 2026R is one of the great tractors in the John Deere stable, and it has earned John Deere a fantastic reputation.

How much oil does a John Deere 2026R take?

Check out the John Deere 2026R oil capacity and oil type in the engine specs section as it may vary across the engines. Keep in mind, that older models might have their oil capacity increased over time. You may compare between the early and late oil capacity.

Do tractors have VIN numbers?

Every tractor has a VIN number. The number is usually engraved below the driver’s seat. Tractor manufacturers put the number in different places on the tractor body.

What was the last year John Deere made the 2026R?

The John Deere 2026R was an agricultural tractor model made from 2016 –

How much can a John Deere 2026R Pull?

The max pulling capacity of the John Deere 2026R tractors starts at 5697 lbs
2584 kg but may be slightly higher depending on the trim.

Leave a Comment