John Deere 2450

John Deere 2450 Technical Specifications

John Deere 2450 is a Row-Crop tractor that was produced by the John Deere between 1987 – 1994.

Below you will find detailed technical specifications for John Deere 2450 covering engine types, horsepower ratings, weight, height, fuel type and tank volume, oil capacity and type, hydraulic system diagram, wiring diagram, battery specs, etc.

John Deere 2450 Production

Manufacturer: John Deere
Type: Utility tractor
Factory: Mannheim, Baden-Wurttemberg, Germany

John Deere 2450 Electrical

Ground: negative
Charging amps: 55
Batteries: 2
Battery volts: 12
Battery AH: 55

John Deere 2450 Mechanical

Chassis: 4×2 2WD
  4×4 MFWD 4WD
Final drives: planetary
Differential lock: mechanical rear
Steering: power assist
  hydrostatic*With four-wheel drive and SG2 cab option.
Brakes: hydraulic wet disc
Cab: ROPS. MC1 or Sound-Gard cab optional. CC2 cab available in 1991.
Transmissions: 8-speed partially synchronized
  16-speed two-speed power shift


Type: closed-center constant pressure
Pressure: 2756 psi
190.0 bar
Pump flow: 11.6 gpm
43.9 lpm

Tracktor Hitch

Rear Type: II
Control: position and draft control
Rear lift (at ends): 6768 lbs
3069 kg

Power Take-off (PTO)

Rear PTO: independent
Clutch: hydraulic wet disc
Rear RPM: 540
Engine RPM: 540@2075

John Deere 2450 Engine detail

Engine Detail
John Deere
Displacement: 239.2 ci
3.9 L
Bore/Stroke: 4.19×4.33 inches
106 x 110 mm
Power: 70 hp
52.2 kW
Rated RPM: 2300
Starter volts: 12
Starter power: 4 hp
3.0 kW

John Deere 2450 Transmission overview

Engine Oil

Transmission: Syncro-Range
Type: partially synchronized
Gears: 8 forward and 4 reverse
Clutch: mechanical disc

John Deere 2450 Dimensions

2WD Wheelbase: 89.2 inches
226 cm
4WD Wheelbase: 90 inches
228 cm
Length: 165.1 inches
419 cm
Width: 73.3 inches
186 cm
4WD Clearance (front axle): 19.5 inches
49 cm
2WD Clearance (front axle): 26.3 inches
66 cm
2WD Front tread: 53.5 to 79.1 inches
135 to 200 cm
4WD Front tread: 59.1 to 79.1 inches
150 to 200 cm
Rear tread: 59.1 to 78.7 inches
150 to 199 cm

John Deere 2450 Weight
2WD MC1 Shipping: 7077 lbs
3210 kg
4WD MC1 Shipping: 7738 lbs
3509 kg
2WD SG2 Shipping: 7485 lbs
3395 kg
4WD SG2 Shipping: 8157 lbs
3700 kg

John Deere 2450 Height
Cab: 96.3 inches
244 cm (low-profile)
  98.2 inches
249 cm (MC1)
  104.8 inches
266 cm (SG2)


Is John Deere 2450 a good tractor?

The John Deere 2450 is one of the great tractors in the John Deere stable, and it has earned John Deere a fantastic reputation.

How much oil does a John Deere 2450 take?

Check out the John Deere 2450 oil capacity and oil type in the engine specs section as it may vary across the engines. Keep in mind, that older models might have their oil capacity increased over time. You may compare between the early and late oil capacity.

Do tractors have VIN numbers?

Every tractor has a VIN number. The number is usually engraved below the driver’s seat. Tractor manufacturers put the number in different places on the tractor body.

What was the last year John Deere made the 2250

The John Deere 2450 was an agricultural tractor model made from 1987 – 1994

Leave a Comment