John Deere 2750 Utility tractor Technical Specifications
John Deere 2750 is a Row-Crop tractor that was produced by the John Deere between 1983 – 1986.
Below you will find detailed technical specifications for John Deere 2750 covering engine types, horsepower ratings, weight, height, fuel type and tank volume, oil capacity and type, hydraulic system diagram, wiring diagram, battery specs, etc.
John Deere 2750 Production
Manufacturer: | |
Manufacturer | John Deere |
Utility tractor | |
Built in Mannheim, Baden-Wurttemberg, Germany | |
Original price | $24,596 (1983 ROPS 2WD ) |
$36,941 (1983 Cab 4WD ) |
Engine: | 62.97 hp 47.0 kW |
PTO (tested) | 75.35 hp 56.2 kW |
John Deere 2750 Electrical
Ground | negative |
Charging system | alternator |
Charging amps | 55 |
Battery volts | 12 |
John Deere 2750 Mechanical
Two- or four-wheel drive | |
Differential lock | mechanical rear |
Power steering | |
Differential hydraulic wet disc brakes | |
Two-post ROPS. Canopy available. Sound-Gard cab optional with available heat and air-conditioning. |
Capacity
Fuel | 26 gal 98.4 L |
Hydraulic system | 13.2 gal 50.0 L |
Hydraulics
Type | closed center |
Capacity | 13.2 gal 50.0 L |
Rear valves | 1 or 2 |
Pump flow | 23 gpm 87.1 lpm |
Tracktor Hitch
Rear Type | II/I |
Control | load and depth control |
Rear lift | 3,300 lbs 1496 kg |
Power Take-off (PTO)
Rear PTO | independent |
Rear RPM | 540 |
540/1000 OptOptional |
Title serial numbers
Location: | Right side of main tractor frame, above front axle. |
1983 | 433494 |
1984 | 505001 |
1985 | 532000 |
1986 | 562001 |
FAQ: How to read a serial number table. |
What year is my John Deere 2750? Serial Number Decoder
The serial number list shows the first tractor built in each year. The other tractors for that year will have successively higher numbers. Your serial number should be between two of the stated numbers.
The list only includes the numbers of the first tractors produced in each year. Your serial should be somewhere between two numbers.Unless you happen to be the first person to own a tractor, your number will not appear on the list.
John Deere 2750 Engine detail
Engine Detail | |
John Deere | |
turbocharged diesel | |
4-cylinder | |
liquid-cooled | |
Displacement | 239 ci 3.9 L |
Bore/Stroke | 4.19×4.33 inches 106 x 110 mm |
Compression | 16.8:1 |
Rated RPM | 2500 |
Starter volts | 12 |
Coolant capacity | 3.4 qts 3.2 L |
Engine Oil |
Transmission | John Deere Top-Shaft Synchronized |
Type | partially synchronized |
Gears | 8 forward and 4 reverse |
Four gears in two ranges, plus reverse range. Synchronized shifting between gears. |
John Deere 2750 Dimensions
2WD Wheelbase | 89.2 inches 226 cm |
4WD Wheelbase | 90 inches 228 cm |
2WD Length | 138.8 inches 352 cm |
4WD Length | 136.9 inches 347 cm |
Height (steering wheel) | 66.3 inches 168 cm |
Height (cab) | 102.2 inches 259 cm |
2WD Clearance (front axle) | 24.8 inches 62 cm |
4WD Clearance (front axle) | 18.9 inches 48 cm |
Rack-and-pinion rear axle |
John Deere 2750 Weight | |
Shipping | 8,210 lbs (2WD cab) 3724 kg |
8,910 lbs (4WD cab) 4041 kg | |
Operating | 7,500 lbs (2WD ROPS) 3402 kg |
Ballasted | 9,625 lbs 4365 kg |
John Deere 2750 Tests
Nebraska Tractor Test 1472 | |
Diesel 16-speed 2WD April 11 – May 11, 1983 Link: Nebraska Tractor Test 1472 file | |
PTO performance | |
Power at rated engine speed | 75.35 hp 56.2 kW |
Fuel use | 4.8 gal/hour 18.2 l/hour |
Power at rated PTO speed | 75.07 hp 56.0 kW |
Fuel use | 4.7 gal/hour 17.8 l/hour |
Drawbar performance | |
Max power | 62.97 hp 47.0 kW |
Fuel use | 4.8 gal/hour 18.2 l/hour |
Gear 5L used for power test. | |
Max pull | 7,581 lbs 3438 kg |
Gear 3L used for pull test. |
FAQ
Is John Deere 2750 a good tractor?
The John Deere 2750 is one of the great tractors in the John Deere stable, and it has earned John Deere a fantastic reputation.
How much oil does a John Deere 2750 take?
Check out the John Deere 2750 oil capacity and oil type in the engine specs section as it may vary across the engines. Keep in mind, that older models might have their oil capacity increased over time. You may compare between the early and late oil capacity.
Do tractors have VIN numbers?
Every tractor has a VIN number. The number is usually engraved below the driver’s seat. Tractor manufacturers put the number in different places on the tractor body.
What was the last year John Deere made the 2750?
The John Deere 2750 was an agricultural tractor model made from 1983 – 1986
How much horsepower is a John Deere 2750?
The 2750 engine tested at 62.97 hp
47.0 kW drawbar and 75.35 hp
56.2 kW kW PTO horsepower.
How much does a John Deere 2750 tractor weight?
Depending on the engine type, the John Deere 2750 weight ranges from 7500 to 8910 pounds .
How much can a John Deere 2750 Pull?
The max pulling capacity of the John Deere 2750 tractors starts at 7,581 lbs
3438 kg but may be slightly higher depending on the trim.
How much can a John John Deere 2750 Lift?
John Deere 2750 tractor hitch is capable of lifting 3,300 lbs
1496 kg.
Where is the serial number on a John Deere 2750?
Lookup right side of main tractor frame, above front axle.