John Deere 320 Technical Specifications
John Deere 320 is a Row-Crop tractor that was produced by the John Deere between 1956 – 1958.
Below you will find detailed technical specifications for John Deere 320 covering engine types, horsepower ratings, weight, height, fuel type and tank volume, oil capacity and type, hydraulic system diagram, wiring diagram, battery specs, etc.
John Deere 320 Production
| Manufacturer: | |
| Manufacturer | John Deere |
| Utility tractor | |
| Built in Dubuque, Iowa, USA | |
| Total built | 3,084 (total) |
| 917 (320U) | |
| 2,167 (320S) | |
| Original price was $1,900 in 1960 | |
| Engine: | |
| Belt (claimed) | 21.5 hp 16.0 kW |
| Plows | 2 |
| Mechanical | |
| Two-wheel drive | |
| Manual steering | |
| Open operator station |
| John Deere 320 photos… |
| Power Take-off (PTO) | |
| Rear PTO | transmission |
| Rear RPM | 540 |
| Dimensions & Tires | |
| 320S Wheelbase | 70 inches 177 cm |
| 320U Wheelbase | 77.75 inches 197 cm |
| Weight | 2750 lbs 1247 kg |
| Front tire | 5×15 |
| Rear tire | 9×24 |
| Full dimensions and tires … | |
| 320 Serial Numbers | |
| 1956 | 320001 |
| 1957 | 321220 |
| 1958 | 325127 |
John Deere 320 Electrical
| Ground | positive |
John Deere 320 Mechanical
| Two-wheel drive | |
| Manual steering | |
| Open operator station |
Power Take-off (PTO)
| Rear PTO | transmission |
| Rear RPM | 540 |
John Deere 320 Engine detail
| Engine Detail | |
| John Deere 4039D | |
| diesel | |
| 4-cylinder | |
| liquid-cooled | |
| Displacement: | 239 ci 3.9 L |
| Bore/Stroke: | 4.19×4.33 inches 106 x 110 mm |
| Rated Power (ECE R24): | 65 hp 48.5 kW |
| Rated RPM: | 2150 |
| Torque: | 178.5 lb-ft 242.0 Nm |
| Torque RPM: | 1500 |
| Starter: | electric |
| Starter volts: | 12 |
| Engine Oil | |
| Type: | synchronized |
| Gears: | 10 forward and reverse |
| Five synchronized gears in two ranges with synchronized shuttle. | |
John Deere 320 Dimensions
| Width: | 73.2 inches 185 cm |
| 3200 Height (cab): | 96.3 inches 244 cm |
| 3200X Height (cab): | 104.4 inches 265 cm |
| Shiping weight: | 7121 lbs 3230 kg |
FAQ
Is John Deere 320 a good tractor?
The John Deere 320 is one of the great tractors in the John Deere stable, and it has earned John Deere a fantastic reputation.
How much oil does a John Deere 320 take?
Check out the John Deere 320 oil capacity and oil type in the engine specs section as it may vary across the engines. Keep in mind, that older models might have their oil capacity increased over time. You may compare between the early and late oil capacity.
Do tractors have VIN numbers?
Every tractor has a VIN number. The number is usually engraved below the driver’s seat. Tractor manufacturers put the number in different places on the tractor body.
What was the last year John Deere made the ?
The John Deere 320 was an agricultural tractor model made from 1956 – 1958
How much does a John Deere 320 tractor weight?
Depending on the engine type, the John Deere 320 weight ranges from 2750 lbs
1247 kg .
How much can a John Deere 320 Pull?
The max pulling capacity of the John Deere 320 tractors starts at 5,453 lbs
2473 kg but may be slightly higher depending on the trim.