John Deere 4020 Row-Crop tractor Technical Specifications
John Deere 4020 is a Row-Crop tractor that was produced by the John Deere between 1963 – 1972.
Below you will find detailed technical specifications for John Deere 4020 covering engine types, horsepower ratings, weight, height, fuel type and tank volume, oil capacity and type, hydraulic system diagram, wiring diagram, battery specs, etc.
John Deere 4020 Production
Manufacturer: | |
Manufacturer | John Deere |
Row-Crop tractor | |
Factories | Waterloo, Iowa, USA |
Mexico | |
Total built | 184,879 (total) |
8,123 (gas) | |
8,445 (LP) | |
168,311 (diesel) | |
17,732 (standard) | |
Original price was $10,345 in 1972 |
Engine: | 83.79 hp 62.5 kW |
PTO (tested) | 95.83 hp 71.5 kW |
John Deere 4020 Electrical
Ground | positive (1964-1969) |
negative (1969-1972) | |
floating (24V) | |
Charging system | Motorola alternator |
Charging amps | 55 |
Batteries | 2 (24V system) |
1 (12V system) | |
Battery volts | 12 |
Battery AH | 75 |
John Deere 4020 Mechanical
Drive | 4×2 2WD |
4×4 HFWD 4WD *Front-wheel assist was optional after 1969. | |
Differential lock | mechanical rear OptOptional |
Power steering | |
Hydraulic wet disc brakes | |
Open operator station. Cab optional. |
Capacity
Gasoline Fuel | 34 gal 128.7 L |
Diesel Fuel | 34 gal 128.7 L |
LP-gas Fuel | 45 gal 170.3 L |
Syncro-Range Hydraulic system | 10 gal 37.9 L |
Power Shift Hydraulic system | 12 gal 45.4 L |
Hydraulics
Type | closed center |
Syncro-Range Capacity | 10 gal 37.9 L |
Power Shift Capacity | 12 gal 45.4 L |
Pressure | 2250 psi 155.1 bar |
Valves | 1 |
SCV flow | 6 gpm 22.7 lpm |
Total flow | 18 gpm (early) 68.1 lpm |
Tracktor Hitch
Rear Type | II |
Rear lift | 3790 lbs 1719 kg |
Power Take-off (PTO)
Rear PTO | independent |
Rear RPM | 540/1000 |
1000 | |
Engine RPM | 540@1900 1000@1900 |
Front PTO | independent |
Front RPM | 1000 |
Engine RPM | 1000@1900 |
Title serial numbers
1964 | 65000 |
1965 | 91000 |
1966 | 119000 |
1967 | 145660 |
1968 | 173982 |
1969 | 201000 |
1970 | 222160 |
1971 | 250000 |
1972 | 260791 |
Final | 270288 |
FAQ: How to read a serial number table. |
What year is my John Deere 4020? Serial Number Decoder
The serial number list shows the first tractor built in each year. The other tractors for that year will have successively higher numbers. Your serial number should be between two of the stated numbers.
The list only includes the numbers of the first tractors produced in each year. Your serial should be somewhere between two numbers.Unless you happen to be the first person to own a tractor, your number will not appear on the list.
John Deere 4020 Engine detail
Engine Detail | |
John Deere | |
diesel | |
6-cylinder 12-valve | |
liquid-cooled inline | |
Oil capacity on most 4020 diesels increased from 8 to 12 quarts starting with the 1969 model year, tractor serial number 201,000. High-crop diesel tractors retained the 8-quart capacity throughout the production run. Tractors fitted with after-market turbochargers, and early tractors with replacement oil pans, may also have the higher oil capacity. | |
Displacement | 404 ci 6.6 L |
Bore/Stroke | 4.25×4.75 inches 108 x 121 mm |
Compression | 16.5:1 |
Rated RPM | 2200 |
Idle RPM | 600-2500 |
Operating RPM | 1500-2200 |
Firing order | 1-5-3-6-2-4 |
Starter volts | 24 |
Coolant capacity | 24 qts 22.7 L |
Intake valve clearance | 0.018 inches 0.457 mm |
Exhaust valve clearance | 0.018 inches 0.457 mm |
Engine Oil | |
Early Oil capacity | 8 qts 7.6 L |
Late Oil capacity | 12 qts 11.4 L |
John Deere 4020 Transmission overview
Transmission | John Deere Syncro-Range |
Type | partially synchronized |
Gears | 8 forward and 2 reverse |
Oil capacity | 52 qts 49.2 L |
Oil type | 303 Special |
Synchro-Range requires the tractor to be stopped and clutch depressed to select one of four shift stations. Once a station is selected the tractor can be shifted on the move between the two forward gears (and single reverse in stations 1 and 2) by using the clutch. |
John Deere 4020 Dimensions
Row crop Wheelbase | 97.5 inches 247 cm |
Standard Wheelbase | 100.25 inches 254 cm |
Length | 151 inches 383 cm |
Width | 89.6 inches 227 cm |
Regular rear axle | 3.375 by 91 inches 85 by 2311 mm |
Long rear axle | 3.375 by 104 inches 85 by 2641 mm |
Extra long rear axle | 3.375 by 112 inches 85 by 2844 mm |
Front tread | 48.5 to 82.25 inches 123 to 208 cm |
Rear tread | 60 to 91 inches 152 to 231 cm |
Rear tread | 66 to 97 inches 167 to 246 cm (long axle) |
Rear tread | 67 to 105 inches 170 to 266 cm (extra long axle) |
John Deere 4020 Weight | |
Shipping | 8,436 lbs (diesel syncro) 3826 kg |
8,225 lbs (gas syncro) 3730 kg | |
8,319 lbs (LP syncro) 3773 kg | |
Operating | 8,645 lbs (gas syncro) 3921 kg |
8,945 lbs (diesel syncro) 4057 kg | |
9,240 lbs (gas powershift) 4191 kg | |
9,560 lbs (diesel powershift) 4336 kg | |
Ballasted | 13,980 lbs*Diesel Powershift with 18.4-34 rear tires with fluid plus front and rear cast iron weights. 6341 kg |
John Deere 4020 Height | |
Row-crop Steering wheel | 77.9 inches 197 cm |
Standard Steering wheel | 78.25 inches 198 cm |
Standard Exhaust | 88.25 inches 224 cm |
Row crop Exhaust | 88.75 inches 225 cm |
John Deere 4020 Tests
Nebraska Tractor Test 849 | |
Diesel Syncro-Range 2WD September 23 – October 2, 1963 Link: Nebraska Tractor Test 849 file | |
PTO performance | |
Power at rated engine speed | 91.17 hp 68.0 kW |
Fuel use | 6.4 gal/hour 24.2 l/hour |
Power at rated PTO speed | 83.57 hp 62.3 kW |
Fuel use | 5.6 gal/hour 21.2 l/hour |
Drawbar performance | |
Max power | 76.36 hp 56.9 kW |
Fuel use | 6.4 gal/hour 24.2 l/hour |
Gear 4 used for power test. | |
Max pull | 10,184 lbs 4619 kg |
Gear 2 used for pull test. |
Nebraska Tractor Test 850 | |||
Nebraska Tractor Test 850 | |
Gasoline Syncro-Range 2WD September 30 – October 7, 1963 Link: Nebraska Tractor Test 850 file | |
PTO performance | |
Power at rated engine speed | 88.09 hp 65.7 kW |
Fuel use | 8.4 gal/hour 31.8 l/hour |
Power at rated PTO speed | 79.95 hp 59.6 kW |
Fuel use | 7.3 gal/hour 27.6 l/hour |
Drawbar performance | |
Max power | 73.06 hp 54.5 kW |
Fuel use | 8.2 gal/hour 31.0 l/hour |
Gear 4 used for power test. | |
Max pull | 10,088 lbs 4575 kg |
Gear 2 used for pull test. |
Nebraska Tractor Test 853 | |||
Nebraska Tractor Test 853 | |
LP gas Syncro-Range 2WD October 5 – 11, 1963 Link: Nebraska Tractor Test 853 file | |
PTO performance | |
Power at rated engine speed | 90.48 hp 67.5 kW |
Fuel use | 10.1 gal/hour 38.2 l/hour |
Power at rated PTO speed | 81.14 hp 60.5 kW |
Fuel use | 8.8 gal/hour 33.3 l/hour |
Drawbar performance | |
Max power | 75.19 hp 56.1 kW |
Fuel use | 9.7 gal/hour 36.7 l/hour |
Gear 4 used for power test. | |
Max pull | 10,217 lbs 4634 kg |
Gear 2 used for pull test. |
Nebraska Tractor Test 930 | |||
Nebraska Tractor Test 930 | |
Diesel Syncro-Range 2WD November 16 – 20, 1965 Link: Nebraska Tractor Test 930 file | |
PTO performance | |
Power at rated engine speed | 94.88 hp 70.8 kW |
Fuel use | 6.0 gal/hour 22.7 l/hour |
Power at rated PTO speed | 86.85 hp 64.8 kW |
Fuel use | 5.3 gal/hour 20.1 l/hour |
Drawbar performance | |
Max power | 83.79 hp 62.5 kW |
Fuel use | 6.0 gal/hour 22.7 l/hour |
Gear 4 used for power test. | |
Max pull | 11,249 lbs 5102 kg |
Gear 2 used for pull test. |
Nebraska Tractor Test 934 | |||
Nebraska Tractor Test 934 | |
LP gas Syncro-Range 2WD April 26 – May 2, 1966 Link: Nebraska Tractor Test 934 file | |
PTO performance | |
Power at rated engine speed | 94.67 hp 70.6 kW |
Fuel use | 10.2 gal/hour 38.6 l/hour |
Power at rated PTO speed | 84.22 hp 62.8 kW |
Fuel use | 8.9 gal/hour 33.7 l/hour |
Drawbar performance | |
Max power | 83.59 hp 62.3 kW |
Fuel use | 10.2 gal/hour 38.6 l/hour |
Gear 4 used for power test. | |
Max pull | 10,674 lbs 4841 kg |
Gear 2 used for pull test. |
Nebraska Tractor Test 939 | |||
Nebraska Tractor Test 939 | |
340ci gasoline Syncro-Range 2WD May 17 – 24, 1966 Link: Nebraska Tractor Test 939 file | |
PTO performance | |
Power at rated engine speed | 95.56 hp 71.3 kW |
Fuel use | 7.9 gal/hour 29.9 l/hour |
Power at rated PTO speed | 85.81 hp 64.0 kW |
Fuel use | 6.9 gal/hour 26.1 l/hour |
Drawbar performance | |
Max power | 83.28 hp 62.1 kW |
Fuel use | 7.7 gal/hour 29.1 l/hour |
Gear 4 used for power test. | |
Max pull | 10,658 lbs 4834 kg |
Gear 2 used for pull test. |
Nebraska Tractor Test 1012 | |||
Nebraska Tractor Test 1012 | |
362ci gasoline Power Shift 2WD May 13 – June 4, 1969 Link: Nebraska Tractor Test 1012 file | |
PTO performance | |
Power at rated engine speed | 95.66 hp 71.3 kW |
Fuel use | 9.3 gal/hour 35.2 l/hour |
Power at rated PTO speed | 87.52 hp 65.3 kW |
Fuel use | 8.1 gal/hour 30.7 l/hour |
Drawbar performance | |
Max power | 82.57 hp 61.6 kW |
Fuel use | 9.3 gal/hour 35.2 l/hour |
Nebraska Tractor Test 1024 | |||
Nebraska Tractor Test 1024 | |
Diesel Power Shift 2WD September 30 – October 17, 1969 Link: Nebraska Tractor Test 1024 file | |
PTO performance | |
Power at rated engine speed | 95.83 hp 71.5 kW |
Fuel use | 6.5 gal/hour 24.6 l/hour |
Power at rated PTO speed | 89.93 hp 67.1 kW |
Fuel use | 6.0 gal/hour 22.7 l/hour |
Drawbar performance | |
Max power | 83.09 hp 62.0 kW |
Fuel use | 6.6 gal/hour 25.0 l/hour |
John Deere 4020 Attachments
1406 kg
2131 kg
81 cm
320 cm
259 cm
307 cm
6 cm
6 cm
612 kg
152 cm
Bucket width: 72 inches
182 cm
Bucket width: 84 inches
213 cm
Bucket width: 96 inches
243 cm
0.4 cu m
Bucket capacity: 0.6 cu yd
0.5 cu m
Bucket capacity: 0.8 cu yd
0.6 cu m
Bucket capacity: 0.9 cu yd
0.7 cu m
1723 kg
2268 kg
81 cm
396 cm
335 cm
383 cm
6 cm
6 cm
803 kg
152 cm
Bucket width: 72 inches
182 cm
Bucket width: 84 inches
213 cm
Bucket width: 96 inches
243 cm
0.4 cu m
Bucket capacity: 0.6 cu yd
0.5 cu m
Bucket capacity: 0.8 cu yd
0.6 cu m
Bucket capacity: 0.9 cu yd
0.7 cu m
1088 kg
1632 kg
66 cm
172 cm
320 cm
264 cm
553 kg
152 cm
Bucket width: 72 inches
182 cm
FAQ
Is John Deere 4020 a good tractor?
The John Deere 4020 is one of the great tractors in the John Deere stable, and it has earned John Deere a fantastic reputation.
How much oil does a John Deere 4020 take?
Check out the John Deere 4020 oil capacity and oil type in the engine specs section as it may vary across the engines. Keep in mind, that older models might have their oil capacity increased over time. You may compare between the early and late oil capacity.
Do tractors have VIN numbers?
Every tractor has a VIN number. The number is usually engraved below the driver’s seat. Tractor manufacturers put the number in different places on the tractor body.
What was the last year John Deere made the 4020?
The John Deere 4020 was an agricultural tractor model made from 1963 – 1972
How much horsepower is a John Deere 4020?
The 4020 engine tested at 83.79 hp
62.5 kW drawbar and 95.83 hp
71.5 kW kW PTO horsepower.
How much does a John Deere 4020 tractor weight?
Depending on the engine type, the John Deere 4020 weight ranges from 8225 to 9560 pounds .
How much can a John Deere 4020 Pull?
The max pulling capacity of the John Deere 4020 tractors starts at 10,184 lbs
4619 kg but may be slightly higher depending on the trim.
How much can a John John Deere 4020 Lift?
John Deere 4020 tractor hitch is capable of lifting 3790 lbs
1719 kg.