John Deere 4040 Row-Crop tractor Technical Specifications
John Deere 4040 is a Row-Crop tractor that was produced by the John Deere between 1978 – 1982.
Below you will find detailed technical specifications for John Deere 4040 covering engine types, horsepower ratings, weight, height, fuel type and tank volume, oil capacity and type, hydraulic system diagram, wiring diagram, battery specs, etc.
John Deere 4040 Production
Manufacturer: | |
Manufacturer | John Deere |
Row-Crop tractor | |
Built in Waterloo, Iowa, USA | |
Original price | $29,992 (1982 Syncro-Range ROPS 2WD ) |
$36,549 (1982 Power Shift Cab 2WD ) |
Engine: | 76.56 hp 57.1 kW |
PTO (tested) | 90.80 hp 67.7 kW |
John Deere 4040 Electrical
Ground | negative |
Charging system | alternator |
Batteries | 2 |
Battery CCA | 850 |
Battery volts | 6 |
John Deere 4040 Mechanical
Drive | 4×2 2WD |
4×4 HFWD 4WD | |
Differential lock | pedal-actuated hydraulic |
Power steering | |
Differential hydraulic wet disc brakes | |
Sound-Gard cab standard. |
Capacity
Fuel | 37 gal 140.0 L |
Hydraulic system | 11 gal 41.6 L |
Hydraulics
Type | closed center |
Capacity | 11 gal 41.6 L |
Valves | 1 or 2 |
Pump flow | 23 gpm 87.1 lpm |
Tracktor Hitch
Rear Type | II/I |
Rear lift | 4316 lbs 1957 kg |
5395 lbsOptOptional 2447 kg |
Power Take-off (PTO)
Rear PTO | independent |
Rear RPM | 540/1000 (1.375) |
John Deere 4040 Engine detail
Engine Detail | |
John Deere | |
diesel | |
6-cylinder | |
liquid-cooled | |
Displacement | 404 ci 6.6 L |
Bore/Stroke | 4.25×4.75 inches 108 x 121 mm |
Pre-heating | ether injection |
Compression | 16.7:1 |
Rated RPM | 2200 |
Idle RPM | 800-2400 |
Operating RPM | 1500-2200 |
Firing order | 1-5-3-6-2-4 |
Starter volts | 12 |
Oil capacity | 17 qts 16.1 L |
Coolant capacity | 24 qts 22.7 L |
Engine Oil |
Transmission | John Deere Quad-Range |
Type | partial power shift |
Gears | 16 forward and 6 reverse |
Oil capacity | 62 qts 58.7 L |
Four gears (1-4) in four ranges (A-D). Power shift between pairs 1-2 and 3-4 in each range, with synchronized shift between 2-3. Two reverses in ranges A-C. Tractor must be stopped, and clutch used, to shift ranges. Power shift is provided hy a hydraulically-controlled planetary that provides an under-drive to each gear. |
John Deere 4040 Dimensions
Wheelbase | 104 inches 264 cm |
Length | 153.2 inches 389 cm |
Width | 96 inches 243 cm |
133 inches (long axle) 337 cm | |
Clearance (front axle) | 22.2 inches 56 cm |
Clearance (rear axle) | 27 inches 68 cm |
Clearance (drawbar) | 14.1 inches 35 cm |
Rack-and-pinion rear axle | 3.386 by 92 inches 86 by 2336 mm |
Rack-and-pinion rear axle | 3.386 by 96 inches 86 by 2438 mm |
Rack-and-pinion rear axle | 3.386 by 109 inches 86 by 2768 mm |
Rack-and-pinion rear axle | 3.386 by 113 inches 86 by 2870 mm |
Front tread | 50 to 91.3 inches 127 to 231 cm |
Rear tread | 60 to 118.3 inches 152 to 300 cm |
John Deere 4040 Weight | |
Shipping | 9630 lbs 4368 kg |
Operating | 10490 lbs 4758 kg |
Ballasted | 12090 lbs 5484 kg |
John Deere 4040 Height | |
Steering wheel | 86.7 inches 220 cm |
ROPS | 104.1 inches 264 cm |
Cab | 109.8 inches 278 cm |
John Deere 4040 Tests
Nebraska Tractor Test 1267 | |
Diesel Quad-Range 2WD November 12 – 28, 1977 Link: Nebraska Tractor Test 1267 file | |
PTO performance | |
Power at rated engine speed | 90.80 hp 67.7 kW |
Fuel use | 6.7 gal/hour 25.4 l/hour |
Drawbar performance | |
Max power | 74.83 hp 55.8 kW |
Fuel use | 6.7 gal/hour 25.4 l/hour |
Max pull | 8,936 lbs 4053 kg |
Nebraska Tractor Test 1359 | |||
Nebraska Tractor Test 1359 | |
Diesel Syncro-Range 2WD August 20 – September 9, 1980 Link: Nebraska Tractor Test 1359 file | |
PTO performance | |
Power at rated engine speed | 90.31 hp 67.3 kW |
Fuel use | 6.5 gal/hour 24.6 l/hour |
Drawbar performance | |
Max power | 73.83 hp 55.1 kW |
Fuel use | 6.3 gal/hour 23.8 l/hour |
Gear 4 used for power test. | |
Max pull | 9,035 lbs 4098 kg |
Gear 2 used for pull test. |
Nebraska Tractor Test 1360 | |||
Nebraska Tractor Test 1360 | |
Diesel Powershift 2WD August 20 – September 11, 1980 Link: Nebraska Tractor Test 1360 file | |
PTO performance | |
Power at rated engine speed | 90.79 hp 67.7 kW |
Fuel use | 6.7 gal/hour 25.4 l/hour |
Power at rated PTO speed | 90.88 hp 67.8 kW |
Fuel use | 6.7 gal/hour 25.4 l/hour |
Drawbar performance | |
Max power | 76.56 hp 57.1 kW |
Fuel use | 6.7 gal/hour 25.4 l/hour |
Gear 4 used for power test. | |
Max pull | 9,195 lbs 4170 kg |
Gear 2 used for pull test. |
FAQ
Is John Deere 4040 a good tractor?
The John Deere 4040 is one of the great tractors in the John Deere stable, and it has earned John Deere a fantastic reputation.
How much oil does a John Deere 4040 take?
Check out the John Deere 4040 oil capacity and oil type in the engine specs section as it may vary across the engines. Keep in mind, that older models might have their oil capacity increased over time. You may compare between the early and late oil capacity.
Do tractors have VIN numbers?
Every tractor has a VIN number. The number is usually engraved below the driver’s seat. Tractor manufacturers put the number in different places on the tractor body.
What was the last year John Deere made the ?
The John Deere 4040 was an agricultural tractor model made from 1978 – 1982
How much horsepower is a John Deere 4040?
The engine tested at 76.56 hp
57.1 kW drawbar and 90.80 hp
67.7 kW kW PTO horsepower.
How much does a John Deere 4040 tractor weight?
Depending on the engine type, the John Deere 4040 weight ranges from 9630 to 10490 pounds .
How much can a John Deere 4040 Pull?
The max pulling capacity of the John Deere 4040 tractors starts at 8,936 lbs
4053 kg but may be slightly higher depending on the trim.
How much can a John John Deere 4040 Lift?
John Deere 4040 tractor hitch is capable of lifting 4316 lbs
1957 kg.