John Deere 435 Technical Specifications
John Deere 435 is a Row-Crop tractor that was produced by the John Deere between 1959 – 1960.
Below you will find detailed technical specifications for John Deere 435 covering engine types, horsepower ratings, weight, height, fuel type and tank volume, oil capacity and type, hydraulic system diagram, wiring diagram, battery specs, etc.
John Deere 435 Production
Manufacturer: | |
Manufacturer | John Deere |
Utility tractor | |
Factories | Dubuque, Iowa, USA |
Monterrey, Mexico | |
Total built | 4,626 |
Original price was $3,000 in 1960 | |
The 435 was the first John Deere tractor released after the new PTO standards were adopted in 1958. It was also the first Deere tractor to have its horsepower rated in terms of PTO after Nebraska dropped the belt test in 1959. |
Engine: | 27.59 hp 20.6 kW |
PTO (tested) | 32.91 hp 24.5 kW |
John Deere 435 Mechanical
Two-wheel drive | |
Steering | manual |
power optional after 1960 (SN 436452) | |
Differential mechanical dry disc brakes | |
Open operator station. |
Hydraulics
Type | open |
Tracktor Hitch
Rear Type | I |
Power Take-off (PTO)
Rear PTO | live |
Rear RPM | 540/1000 |
John Deere 435 Engine detail
Engine Detail | |
John Deere | |
turbocharged diesel | |
6-cylinder | |
liquid-cooled | |
Displacement: | 466 ci 7.6 L |
Bore/Stroke: | 4.56×4.75 inches 116 x 121 mm |
Power: | 138 hp 102.9 kW |
Compression: | 16.8:1 |
Rated RPM: | 2200 |
Torque: | 442.5 lb-ft 600.0 Nm |
Torque RPM: | 1400 |
Starter: | electric |
Starter volts: | 12 |
Starter power: | 5.9 hp 4.4 kW |
Engine Oil |
Transmission: | John Deere Quad-Range |
Type: | partial power shift |
Gears: | 16 forward and 6 reverse |
Four gears (1-4) in four ranges (A-D). Power shift between gear pairs 1-2 and 3-4 in each range. Synchronized shift between gears 2 and 3. |
John Deere 435 Dimensions
Wheelbase: | 105.3 inches 267 cm |
Length: | 183.5 inches 466 cm |
Width: | 96 inches 243 cm |
Height (cab): | 114.7 inches 291 cm |
Height (exhaust): | 124.3 inches 315 cm |
Shiping weight: | 14088 lbs 6390 kg |
Front tread: | 63 to 84.3 inches 160 to 214 cm |
Rear tread: | 62.6 to 92.5 inches 159 to 234 cm |
John Deere 435 Tests
Nebraska Tractor Test 716 | |
Diesel 5-speed 2WD September 8 – 18, 1959 Link: Nebraska Tractor Test 716 file | |
PTO performance | |
Power at rated engine speed | 32.91 hp 24.5 kW |
Fuel use | 2.3 gal/hour 8.7 l/hour |
Power at rated PTO speed | 32.13 hp 24.0 kW |
Fuel use | 2.2 gal/hour 8.3 l/hour |
Drawbar performance | |
Max power | 27.59 hp 20.6 kW |
Fuel use | 2.4 gal/hour 9.1 l/hour |
Gear 3 used for power test. | |
Max pull | 4,241 lbs 1923 kg |
Gear 1 used for pull test. |
FAQ
Is John Deere 435 a good tractor?
The John Deere 435 is one of the great tractors in the John Deere stable, and it has earned John Deere a fantastic reputation.
How much oil does a John Deere 435 take?
Check out the John Deere 435 oil capacity and oil type in the engine specs section as it may vary across the engines. Keep in mind, that older models might have their oil capacity increased over time. You may compare between the early and late oil capacity.
Do tractors have VIN numbers?
Every tractor has a VIN number. The number is usually engraved below the driver’s seat. Tractor manufacturers put the number in different places on the tractor body.
What was the last year John Deere made the ?
The John Deere 435 was an agricultural tractor model made from 1959 – 1960
How much horsepower is a John Deere 435?
The engine tested at 27.59 hp
20.6 kW drawbar and 32.91 hp
24.5 kW kW PTO horsepower.
How much does a John Deere 435 tractor weight?
Depending on the engine type, the John Deere 435 weight ranges from 3,750 lbs
1701 kg .
How much can a John Deere 435 Pull?
The max pulling capacity of the John Deere 435 tractors starts at 4,241 lbs
1923 kg but may be slightly higher depending on the trim.