John Deere 5045E 5E Series Technical Specifications
John Deere 5045E is a Row-Crop tractor that was produced by the John Deere between 2008 – 2022.
Below you will find detailed technical specifications for John Deere 5045E covering engine types, horsepower ratings, weight, height, fuel type and tank volume, oil capacity and type, hydraulic system diagram, wiring diagram, battery specs, etc.
John Deere 5045E Production
Manufacturer: |
Manufacturer: |
John Deere
|
Type: |
Utility tractor
|
Factory: |
Pune, Maharashtra, India
|
John Deere 5045E Electrical
Ground: |
negative
|
Charging system: |
alternator
|
Charging amps: |
40
|
Battery CCA: |
623
|
Battery volts: |
12
|
John Deere 5045E Mechanical
Chassis: |
4×4 MFWD 4WD
|
Final drives: |
planetary
|
Differential lock: |
rear diff lock standard
|
Steering: |
hydrostatic power
|
Brakes: |
hydraulic wet disc
|
Cab: |
Folding 2-post ROPS
|
Transmission: |
partially synchronized
|
Capacity
Fuel: |
18 gal
68.1 L
|
Hydraulic system: |
10.3 gal
39.0 L
|
Front axle: |
4.8 qts
4.5 L
|
Front hubs: |
0.85 qts
0.8 L (each)
|
Hydraulics
Type: |
open center
|
Capacity: |
10.3 gal
39.0 L
|
Pressure: |
2828 psi
195.0 bar
|
Rear valves: |
1 or 2
|
Mid valves: |
2
|
Pump flow: |
11.4 gpm
43.1 lpm
|
Total flow: |
18.2 gpm
68.9 lpm
|
Steering flow: |
6.8 gpm
25.7 lpm
|
Steering press.: |
1958 psi
135.0 bar
|
Tracktor Hitch
Rear Type: |
2
|
Control: |
position and top-link draft control
|
Rear lift (at 24″/610mm): |
3,192 lbs
1447 kg
|
Power Take-off (PTO)
Rear PTO: |
independent
|
Clutch: |
mechanical
|
Rear RPM: |
540
|
John Deere 5045E Engine detail
Engine Detail |
John Deere PowerTech 3029T |
turbocharged diesel |
3-cylinder |
liquid-cooled |
Displacement: |
179 ci
2.9 L
|
Bore/Stroke: |
4.19×4.33 inches
106 x 110 mm
|
Rated Power (EC 97/98): |
45 hp
33.6 kW
|
Air cleaner: |
two paper elements
|
Rated RPM: |
2400
|
Idle RPM: |
800-2600
|
Operating RPM: |
1700-2400
|
Torque: |
135.7 lb-ft
184.0 Nm
|
Torque RPM: |
1700
|
Firing order: |
1-2-3
|
Starter volts: |
12
|
Coolant capacity: |
10 qts
9.5 L
|
Intake valve clearance: |
0.014 inches
0.356 mm
|
Exhaust valve clearance: |
0.018 inches
0.457 mm
|
Engine Oil |
John Deere 5045E Transmission overview
Transmission: |
SyncShuttle
|
Type: |
partially synchronized
|
Oil capacity: |
41.2 qts
39.0 L
|
Oil type: |
JD Hy-Gard |
Three gears (1-3) plus reverse (R) in each of three ranges (A-C). Shuttle shift between 2 and R in all ranges. Forward gear shifts in-range are synchronized. Shifts between ranges are not synchronized. The SyncShuttle is standard equipment on four-wheel drive models.tran1fwd |
John Deere 5045E Dimensions
Wheelbase: |
80.7 inches
204 cm
|
Length: |
137.8 inches
350 cm
|
Width: |
57.3 inches
145 cm (axle flange)
|
Shiping weight: |
5,070 lbs
2299 kg
|
Clearance (front axle): |
13.4 inches
34 cm
|
Front axle: |
Flange
|
John Deere 5045E Height |
Hood: |
53.8 inches
136 cm
|
ROPS: |
93.9 inches
238 cm
|
|
75.7 inches
192 cm (folded)
|
FAQ
Is John Deere 5045E a good tractor?
The John Deere 5045E is one of the great tractors in the John Deere stable, and it has earned John Deere a fantastic reputation.
How much oil does a John Deere 5045E take?
Check out the John Deere 5045E oil capacity and oil type in the engine specs section as it may vary across the engines. Keep in mind, that older models might have their oil capacity increased over time. You may compare between the early and late oil capacity.
Do tractors have VIN numbers?
Every tractor has a VIN number. The number is usually engraved below the driver’s seat. Tractor manufacturers put the number in different places on the tractor body.
What was the last year John Deere made the 5045E?
The John Deere 5045E was an agricultural tractor model made from 2008 – 2022
|
