John Deere 5075M

John Deere 5075M 5M Series Technical Specifications

John Deere 5075M is a Row-Crop tractor that was produced by the John Deere between 2008 – 2022.

Below you will find detailed technical specifications for John Deere 5075M covering engine types, horsepower ratings, weight, height, fuel type and tank volume, oil capacity and type, hydraulic system diagram, wiring diagram, battery specs, etc.

John Deere 5075M Production

Manufacturer: John Deere
Type: Utility tractor
Factory: Augusta, Georgia, USA
Original price: $38,512 (2009 2WD ROPS)
  $49,182 (2009 4WD cab)

John Deere 5075M Power

Engine: 75 hp
55.9 kW
PTO (claimed): 60 hp
44.7 kW
PTO (tested): 65.58 hp
48.9 kW

John Deere 5075M Electrical

Ground: negative
Charging system: alternator
Charging amps: 70 (ROPS)
  90 (cab)
  120 (optional)
Battery CCA: 925
Battery volts: 12
Battery Group: 31

John Deere 5075M Mechanical

Chassis: 4×2 2WD
  4×4 MFWD 4WD (optional)
Final drives: inboard planetary
Differential lock: shift-on-the-move electro-hydraulic rear differential lock
Steering: hydrostatic power
Brakes: hydraulic wet disc
Cab: Foldable ROPS. Optional deluxe ROPS with upgraded seat. Optional cab with heat and air conditioning.
Transmissions: 16-speed partially synchronized
  12-speed partially synchronized
  16-speed partially synchronized with power shuttle


Fuel: 22.3 gal
84.4 L (ROPS)
  31 gal
117.3 L (cab)
Hydraulic system: 11.9 gal
45.0 L
Front hubs: 0.84 qts
0.8 L (each)
Front diff.: 5.3 qts
5.0 L


Type: open center
Capacity: 11.9 gal
45.0 L
Pressure: 2828 psi
195.0 bar
Valves: 0, 2 or 3 (rear)
  0, 2 or 3 (mid)
Pump flow: 14.6 gpm
55.3 lpm
Total flow: 20.9 gpm
79.1 lpm
Oil type:

-10oF [-23oC]^ : HY-GARD
-10oF [-23oC]^ : JDM J20C
10o-104oF [-12o-40oC]   : BIO HY-GARD JDM 20D

Steering flow: 6.3 gpm
23.8 lpm
Steering press.: 1922 psi
132.5 bar

Tracktor Hitch

Rear Type: II/I
Rear lift (at 24″/610mm): 3,595 lbs
1630 kg
  4,498 lbs
2040 kg (optional)

Power Take-off (PTO)

Rear PTO: independent electrohydraulic
Rear RPM: 540/540E
  540/540E/1000 (optional)

John Deere 5075M Engine detail

Engine Detail
John Deere PowerTech 5030
turbocharged diesel
Displacement: 186 ci
3.0 L
Bore/Stroke: 3.385×4.134 inches
86 x 105 mm
Power: 75 hp
55.9 kW
Air cleaner: dry
Rated RPM: 2200
Torque: 300 lb-ft
406.8 Nm
Torque RPM: 1400
Starter volts: 12
Coolant capacity: 10.4 qts
9.8 L

John Deere 5075M Transmission overview

Engine Oil

Transmission: SyncReverser
Type: partially synchronized
Gears: 16 forward and reverse
Operated via three levers and foot clutch. The speed shift lever selects one of four speeds. The range shift lever selects one of four ranges. Reverser lever selects direction of travel. Synchronized shuttle shift with reverser lever, or speed change with speed shift lever, while moving using the clutch. Tractor must be stopped to change ranges.

John Deere 5075M Dimensions

Wheelbase: 85.6 inches
217 cm
Ground clearance: 18.8 inches
47 cm (front axle)
Front tread: 57.6 to 82.6 inches
146 to 209 cm (2WD)
Front tread: 52.8 to 75 inches
134 to 190 cm (4WD)
Rear tread: 53.1 to 80.9 inches
134 to 205 cm

John Deere 5075M Weight
Operating: 6,017 lbs
2729 kg (2WD ROPS)
  6,300 lbs
2857 kg (2WD deluxe ROPS)
  7,400 lbs
3356 kg (2WD cab)
  6,400 lbs
2903 kg (4WD ROPS)
  6,700 lbs
3039 kg (4WD deluxe ROPS)
  7,800 lbs
3538 kg (4WD cab)

John Deere 5075M Tests

Nebraska Tractor Test 1959

Nebraska Tractor Test 1959
Diesel 16-speed 4WD
September 22 – October 6, 2009
Link: Nebraska Tractor Test 1959 file
PTO performance
Max power: 65.58 hp
48.9 kW
Fuel use: 3.9 gal/hour
14.8 l/hour
Power at rated engine speed: 60.12 hp
44.8 kW
Fuel use: 4.2 gal/hour
15.9 l/hour
Power at rated PTO speed: 60.63 hp
45.2 kW
Fuel use: 4.1 gal/hour
15.5 l/hour


Is John Deere 5075M a good tractor?

The John Deere 5075M is one of the great tractors in the John Deere stable, and it has earned John Deere a fantastic reputation.

How much oil does a John Deere 5075M take?

Check out the John Deere 5075M oil capacity and oil type in the engine specs section as it may vary across the engines. Keep in mind, that older models might have their oil capacity increased over time. You may compare between the early and late oil capacity.

Do tractors have VIN numbers?

Every tractor has a VIN number. The number is usually engraved below the driver’s seat. Tractor manufacturers put the number in different places on the tractor body.

What was the last year John Deere made the 5065M

The John Deere 5075M was an agricultural tractor model made from 2008 – 2022

Leave a Comment