John Deere 50F

John Deere 50F Orchard/Vineyard tractor Technical Specifications

John Deere 50F is a Row-Crop tractor that was produced by the John Deere between 2002 – 2010.

Below you will find detailed technical specifications for John Deere 50F covering engine types, horsepower ratings, weight, height, fuel type and tank volume, oil capacity and type, hydraulic system diagram, wiring diagram, battery specs, etc.

John Deere 50F Production

Distributor: John Deere
Manufacturer: Goldini
Type: Orchard/Vineyard tractor
Factory: Italy

John Deere 50F Electrical

Ground: negative
Charging system: alternator
Charging amps: 55
Battery volts: 12

John Deere 50F Mechanical

Chassis: 4×4 MFWD 4WD
Steering: power
Brakes: disc
Cab: Two-post mid-mount folding ROPS.
Transmissions: 16-speed


Type: open center
Pump flow: 10.3 gpm
39.0 lpm

Tracktor Hitch

Rear Type: II/I
Rear lift (at ends): 5071 lbs
2300 kg

Power Take-off (PTO)

Rear RPM: 540/540E

John Deere 50F Engine detail

Engine Detail
VM Motori D703
Displacement: 127.1 ci
2.1 L
Bore/Stroke: 3.70×3.94 inches
94 x 100 mm
Rated Power (EC 97/98): 49 hp
36.5 kW
Rated RPM: 2600
Torque: 107 lb-ft
145.1 Nm
Torque RPM: 1200
Starter: electric
Starter volts: 12

John Deere 50F Transmission overview

Engine Oil

Gears: 16 forward and 8 reverse
Clutch: 254mm mechanical dry disc

John Deere 50F Dimensions

Wheelbase: 68.5 inches
173 cm
Length: 138 inches
350 cm
Height: 86.6 inches
219 cm
Weight: 4475 lbs
2029 kg


Is John Deere 50F a good tractor?

The John Deere 50F is one of the great tractors in the Goldini stable, and it has earned Goldini a fantastic reputation.

How much oil does a John Deere 50F take?

Check out the John Deere 50F oil capacity and oil type in the engine specs section as it may vary across the engines. Keep in mind, that older models might have their oil capacity increased over time. You may compare between the early and late oil capacity.

Do tractors have VIN numbers?

Every tractor has a VIN number. The number is usually engraved below the driver’s seat. Tractor manufacturers put the number in different places on the tractor body.

What was the last year Goldini made the 50F?

The John Deere 50F was an agricultural tractor model made from 2002 – 2010

How much can a John Deere 50F Pull?

The max pulling capacity of the John Deere 50F tractors starts at 4,515 lbs
2048 kg but may be slightly higher depending on the trim.

Leave a Comment