John Deere 5605 Technical Specifications
John Deere 5605 is a Row-Crop tractor that was produced by the John Deere between 2000 – 2011.
Below you will find detailed technical specifications for John Deere 5605 covering engine types, horsepower ratings, weight, height, fuel type and tank volume, oil capacity and type, hydraulic system diagram, wiring diagram, battery specs, etc.
John Deere 5605 Production
Manufacturer: |
Manufacturer: |
John Deere
|
Type: |
Utility tractor
|
Factory: |
Montenegro, Brazil
|
John Deere 5605 Electrical
Ground: |
negative
|
Charging system: |
alternator
|
Charging amps: |
52
|
Battery volts: |
12
|
Battery AH: |
100
|
John Deere 5605 Mechanical
Chassis: |
4×2 2WD
|
|
4×4 MFWD 4WD (optional)
|
Steering: |
hydrostatic power
|
Brakes: |
hydraulic wet disc
|
Cab: |
Two-post ROPS.
|
Transmission: |
9-speed
|
Capacity
Fuel: |
27.7 gal
104.8 L
|
Hydraulic system: |
10.6 gal
40.1 L
|
Hydraulics
Type: |
open center gear pump
|
Capacity: |
10.6 gal
40.1 L
|
Pressure: |
2756 psi
190.0 bar
|
Valves: |
2
|
Pump flow: |
11.36 gpm
43.0 lpm
|
SCV flow: |
10.57 gpm
40.0 lpm
|
Oil type: |
|
Steering flow: |
6.9 gpm
26.1 lpm
|
Tracktor Hitch
Rear Type: |
II
|
Control: |
position and depth control
|
Rear lift (at ends): |
6,805 lbs
3086 kg
|
Rear lift (at 24″/610mm): |
3,968 lbs
1799 kg
|
Power Take-off (PTO)
Rear PTO: |
independent
|
Clutch: |
mechanical dry disc
|
Rear RPM: |
540
|
John Deere 5605 Engine detail
Engine Detail |
John Deere 4045D Series 350 |
diesel |
4-cylinder |
liquid-cooled |
Displacement: |
276 ci
4.5 L
|
Bore/Stroke: |
4.15×5.00 inches
105 x 127 mm
|
Power: |
75 hp
55.9 kW
|
Rated RPM: |
2400
|
Torque: |
195.5 lb-ft
265.1 Nm
|
Torque RPM: |
1600
|
Starter volts: |
12
|
Coolant capacity: |
15.85 qts
15.0 L
|
Engine Oil |
John Deere 5605 Transmission overview
Transmission: |
John Deere Top Shaft Synchronized (TSS)
|
Gears: |
9 forward and 3 reverse
|
Clutch: |
cerametalic dry disc
|
Oil capacity: |
42.3 qts
40.0 L
|
Oil type: |
JD Hy-Gard |
Three gears (1-3) in three ranges (A-C). |
John Deere 5605 Dimensions
Wheelbase: |
85.7 inches
217 cm
|
Length: |
151.6 inches
385 cm
|
Height: |
103.1 inches
261 cm
|
Rear axle: |
Flange
|
Front tread: |
56.7 to 78.7 inches
144 to 199 cm
|
Front tread: |
45.7 to 77.4 inches
116 to 196 cm
|
Rear tread: |
55.1 to 70.9 inches
139 to 180 cm
|
John Deere 5605 Weight |
2WD : |
5,952 lbs
2699 kg
|
4WD : |
6,393 lbs
2899 kg
|
Max capacity: |
9,921 lbs
4500 kg
|
FAQ
Is John Deere 5605 a good tractor?
The John Deere 5605 is one of the great tractors in the John Deere stable, and it has earned John Deere a fantastic reputation.
How much oil does a John Deere 5605 take?
Check out the John Deere 5605 oil capacity and oil type in the engine specs section as it may vary across the engines. Keep in mind, that older models might have their oil capacity increased over time. You may compare between the early and late oil capacity.
Do tractors have VIN numbers?
Every tractor has a VIN number. The number is usually engraved below the driver’s seat. Tractor manufacturers put the number in different places on the tractor body.
What was the last year John Deere made the 5605?
The John Deere 5605 was an agricultural tractor model made from 2000 – 2011
|
