John Deere 6225

John Deere 6225 Technical Specifications

John Deere 6225 is a Row-Crop tractor that was produced by the John Deere between 6025 Series.

Below you will find detailed technical specifications for John Deere 6225 covering engine types, horsepower ratings, weight, height, fuel type and tank volume, oil capacity and type, hydraulic system diagram, wiring diagram, battery specs, etc.

John Deere 6225 Production

Manufacturer: John Deere
Type: Utility tractor
Factory: Mannheim, Baden-Wurttemberg, Germany

John Deere 6225 Electrical

Ground: negative
Charging system: alternator
Charging amps: 90
Battery volts: 12
Battery AH: 110

John Deere 6225 Mechanical

Chassis: 4×2 2WD
  4×4 MFWD 4WD (optional)
Steering: hydrostatic power
Brakes: hydraulic wet disc
Cab: Two-post foldable ROPS.
Transmissions: 12-speed synchronized
  16-speed power shuttle


Type: open center gear pump
Pressure: 2538 psi
175.0 bar
Pump flow: 14.27 gpm
54.0 lpm

Tracktor Hitch

Rear Type: 2/1
Control: load and depth control with mechanical top-link sensing
Rear lift: 9,037 lbs
4099 kg

Power Take-off (PTO)

Rear PTO: independent
Clutch: mechanical-hydraulic wet disc
Rear RPM: 540/1000
Engine RPM: 540@2143

Title serial numbers

Location: Right side of main tractor frame.

What year is my John Deere 6225? Serial Number Decoder

The serial number list shows the first tractor built in each year. The other tractors for that year will have successively higher numbers. Your serial number should be between two of the stated numbers.

The list only includes the numbers of the first tractors produced in each year. Your serial should be somewhere between two numbers.Unless you happen to be the first person to own a tractor, your number will not appear on the list.

John Deere 6225 Engine detail

Engine Detail
John Deere 4045HL
turbocharged intercooled diesel
Displacement: 276 ci
4.5 L
Bore/Stroke: 4.19×5.00 inches
106 x 127 mm
Emissions: Stage III
Rated Power (ECE R24): 90 hp
67.1 kW
Rated Power (EC 97/98): 94 hp
70.1 kW
Maximum Power (ECE R24): 95 hp
70.8 kW
Maximum Power (EC 97/68): 99 hp
73.8 kW
Fuel system: electronic fuel injection
Cooling system: viscous fan
Rated RPM: 2300
Idle RPM: 850-2460
Operating RPM: 1500-2300
Torque: 300 lb-ft
406.8 Nm
Torque RPM: 1600
Firing order: 1-3-4-2
Starter: electric
Starter volts: 12
Oil capacity: 16.9 qts
16.0 L
Coolant capacity: 28 qts
26.5 L

John Deere 6225 Transmission overview

Engine Oil

Transmission: John Deere SyncroPlus
Type: synchronized
Gears: 12 forward and 4 reverse
Clutch: wet 225mm disc PermaClutch II
Oil capacity: 58.1 qts
55.0 L
Three gears (1-3) plus reverse (R) in four ranges (A-D).

John Deere 6225 Dimensions

Wheelbase: 94.5 inches
240 cm
Length: 168.2 inches
427 cm
Width: 87.2 inches
221 cm
Height (ROPS): 108.9 inches
276 cm
Shiping weight: 8,333 lbs
3779 kg
Max weight: 15,430 lbs
6999 kg
Clearance (rear axle): 63.5,63.9,66.2,67.4,71.5,72.7,72.7,73.9,75.4 inches
161 cm
Rear axle: Flange


Is John Deere 6225 a good tractor?

The John Deere 6225 is one of the great tractors in the John Deere stable, and it has earned John Deere a fantastic reputation.

How much oil does a John Deere 6225 take?

Check out the John Deere 6225 oil capacity and oil type in the engine specs section as it may vary across the engines. Keep in mind, that older models might have their oil capacity increased over time. You may compare between the early and late oil capacity.

Do tractors have VIN numbers?

Every tractor has a VIN number. The number is usually engraved below the driver’s seat. Tractor manufacturers put the number in different places on the tractor body.

What was the last year John Deere made the 6225?

The John Deere 6225 was an agricultural tractor model made from 6025 Series

Where is the serial number on a John Deere 6225?

Lookup right side of main tractor frame.

Leave a Comment