John Deere 6410

John Deere 6410 Utility tractor Technical Specifications

John Deere 6410 is a Row-Crop tractor that was produced by the John Deere between 1999 – 2002.

Below you will find detailed technical specifications for John Deere 6410 covering engine types, horsepower ratings, weight, height, fuel type and tank volume, oil capacity and type, hydraulic system diagram, wiring diagram, battery specs, etc.

John Deere 6410 Production











Manufacturer:
Manufacturer: John Deere
Type: Utility tractor
Factory: Mannheim, Baden-Wurttemberg, Germany


John Deere 6410 Power













Engine:
Engine (gross): 104 hp
77.6 kW
PTO (claimed): 90 hp
67.1 kW
Drawbar (tested): 74.8 hp
55.8 kW
PTO (tested): 98.0 hp
73.1 kW

John Deere 6410 Electrical




























Ground: negative
Charging system: alternator
ROPS Charging amps: 90
Cab Charging amps: 115
Battery CCA: 830
  1230*Optional
Battery volts: 12
Battery AH: 110
  154*Optional

John Deere 6410 Mechanical


































Chassis: 4×2 2WD
  4×4 MFWD 4WD
Final drives: inboard planetary
Steering: power
Brakes: differential hydraulic wet disc
Cab: Two-post ROPS. ComfortGard cab optional with air-conditioning.
Transmissions: 12-speed fully synchronized
  16-speed four-speed power shift
  24-speed four-speed power shift

Hydraulics
















Type: closed center pressure-flow compensating
Pressure: 2900 psi
200.0 bar
Valves: 1 to 4
Pump flow: 25.4 gpm
96.1 lpm
  18.9 gpm
71.5 lpm *Optional

Tracktor Hitch













Rear Type: II
Control: electronic lower-link draft sensing
Rear lift: 5915 lbs
2683 kg
Front Hitch: optional

Power Take-off (PTO)







Rear PTO: independent
Rear RPM: 540/1000 (1.375)

John Deere 6410 Engine detail























































Engine Detail
John Deere 4045TL056
turbocharged diesel
4-cylinder
liquid-cooled
Displacement: 276 ci
4.5 L
Bore/Stroke: 4.19×5.00 inches
106 x 127 mm
Power (gross): 104 hp
77.6 kW
Compression: 17.8:1
Rated RPM: 2300
Operating RPM: 1500-2300
Torque: 325 lb-ft
440.7 Nm
Torque RPM: 1400
Firing order: 1-3-4-2
Starter volts: 12
Oil capacity: 12.7 qts
12.0 L
ROPS Coolant capacity: 11.6 qts
11.0 L
Cab Coolant capacity: 14.3 qts
13.5 L
Intake valve clearance: 0.014 inches
0.356 mm
Exhaust valve clearance: 0.018 inches
0.457 mm



John Deere 6410 Transmission overview

Engine Oil














Transmission: SyncroPlus
Type: fully synchronized
Gears: 12 forward and 4 reverse
Clutch: wet disc
Three gears (1-3), plus reverse (R) in four ranges (A-D).

John Deere 6410 Dimensions

























Wheelbase: 94.5 inches
240 cm
Length: 162.7 inches
413 cm
Width: 80 inches
203 cm *Width of tractor with flange axles.
2WD Clearance (front axle): 23.1 inches
58 cm
4WD Clearance (front axle): 19.2 inches
48 cm
Rear axle: Flange
Rear axle: Rack-and-pinion: 3.1 by 89.3 inches
78 by 2268 mm
Rear axle: Rack-and-pinion: 3.1 by 100.6 inches
78 by 2555 mm



















John Deere 6410 Weight
2WD ROPS Shipping: 7607 lbs
3450 kg
2WD Cab Shipping: 8114 lbs
3680 kg
4WD ROPS Shipping: 8246 lbs
3740 kg
4WD Cab Shipping: 8754 lbs
3970 kg
4WD Cab Operating: 9680 lbs
4390 kg
















John Deere 6410 Height
Steering wheel: 72 inches
182 cm
ROPS: 110.4 inches
280 cm
Cab: 104.6 inches
265 cm
Exhaust: 103.8 inches
263 cm

John Deere 6410 Tests

OCED Tractor Test 1806



















































OCED Tractor Test 1806
Diesel PowrQuad 4WD
May 1998 – June 1998,
Link: OCED Tractor Test 1806 file
PTO performance
Max power: 98.0 hp
73.1 kW
Fuel use: 5.4 gal/hour
20.4 l/hour
Power at rated engine speed: 90.4 hp
67.4 kW
Fuel use: 5.4 gal/hour
20.4 l/hour
Power at rated PTO speed: 92.5 hp
69.0 kW
Fuel use: 5.5 gal/hour
20.8 l/hour
Drawbar performance
Max power: 74.8 hp
55.8 kW
Fuel use: 5.5 gal/hour
20.8 l/hour
Gear 1C used for power test.
Max pull: 9480 lbs
4300 kg
Gear 2B used for pull test.

FAQ

Is John Deere 6410 a good tractor?

The John Deere 6410 is one of the great tractors in the John Deere stable, and it has earned John Deere a fantastic reputation.

How much oil does a John Deere 6410 take?

Check out the John Deere 6410 oil capacity and oil type in the engine specs section as it may vary across the engines. Keep in mind, that older models might have their oil capacity increased over time. You may compare between the early and late oil capacity.

Do tractors have VIN numbers?

Every tractor has a VIN number. The number is usually engraved below the driver’s seat. Tractor manufacturers put the number in different places on the tractor body.

What was the last year John Deere made the 6310

The John Deere 6410 was an agricultural tractor model made from 1999 – 2002

Leave a Comment