John Deere 7225J

John Deere 7225J Row-Crop tractor Technical Specifications

John Deere 7225J is a Row-Crop tractor that was produced by the John Deere between 2010 – .

Below you will find detailed technical specifications for John Deere 7225J covering engine types, horsepower ratings, weight, height, fuel type and tank volume, oil capacity and type, hydraulic system diagram, wiring diagram, battery specs, etc.

John Deere 7225J Production

Manufacturer: John Deere
Type: Row-Crop tractor
Factory: Montenegro, Brazil

John Deere 7225J Electrical

Ground: negative
Charging system: alternator
Charging amps: 90
Batteries: 2
Battery volts: 12
Battery AH: 100

John Deere 7225J Mechanical

Chassis: 4×4 MFWD 4WD
Differential lock: electro-hydraulic
Steering: hydrostatic power
Brakes: hydraulic wet disc
Trailer brakes: air brake optional
Cab: Cab standard with air-conditoning.
Transmissions: 16-speed partial power shift


Type: closed center
Pressure: 3046 psi
210.0 bar
Valves: 2 to 4
Pump flow: 32 gpm
121.1 lpm
  46 gpm
174.1 lpm (optional)
SCV flow: 30.1 gpm
113.9 lpm
  44.9 gpm
169.9 lpm (optional)

Tracktor Hitch

Rear Type: 3/3N
Control: electronic lower-link sensing
Rear lift (at ends): 23,020 lbs
10441 kg
Rear lift (at 24″/610mm): 10,140 lbs
4599 kg
  14,000 lbs
6350 kg (optional)

Power Take-off (PTO)

Rear PTO: independent
Clutch: electro-hydraulic wet disc
Rear RPM: 540/1000
Engine RPM: 540@1950

John Deere 7225J Engine detail

Engine Detail
John Deere 6068 Powertech
turbocharged intercooled diesel
6-cylinder 24-valve
Displacement: 414 ci
6.8 L
Bore/Stroke: 4.19×5.00 inches
106 x 127 mm
Power: 225 hp
167.8 kW
Fuel system: electronic injection common rail
Rated RPM: 2100
Torque: 754.5 lb-ft
1023.1 Nm
Torque RPM: 1600
Starter volts: 12

John Deere 7225J Transmission overview

Engine Oil

Transmission: John Deere PowrQuad Plus
Type: partial power shift
Gears: 16 forward and reverse
Clutch: hydraulic wet disc
Four gears (1-4) in four ranges (A-D) with left-hand power shuttle. Push-button power shifting between gears, synchronized range shifting using the clutch.

John Deere 7225J Dimensions

Wheelbase: 112.6 inches
286 cm
Length: 240.4 inches
610 cm
Height (cab): 123.7 inches
314 cm
Weight: 17,860 lbs
8101 kg
Ballasted weight: 27,340 lbs
12401 kg
Clearance (front axle): 20.9 inches
53 cm
Rear axle: 3.937 by 96 inches
99 by 2438 mm
Rear axle: 3.937 by 110.5 inches
99 by 2806 mm
Front tread: 60 to 84 inches
152 to 213 cm
Rear tread: 60 to 84.1 inches
152 to 213 cm
Rear tread: 62.5 to 126.7 inches
158 to 321 cm (long axle)


Is John Deere 7225J a good tractor?

The John Deere 7225J is one of the great tractors in the John Deere stable, and it has earned John Deere a fantastic reputation.

How much oil does a John Deere 7225J take?

Check out the John Deere 7225J oil capacity and oil type in the engine specs section as it may vary across the engines. Keep in mind, that older models might have their oil capacity increased over time. You may compare between the early and late oil capacity.

Do tractors have VIN numbers?

Every tractor has a VIN number. The number is usually engraved below the driver’s seat. Tractor manufacturers put the number in different places on the tractor body.

What was the last year John Deere made the 7205J

The John Deere 7225J was an agricultural tractor model made from 2010 –

Leave a Comment