John Deere 76F

John Deere 76F Goldoni built Technical Specifications

John Deere 76F is a Row-Crop tractor that was produced by the John Deere between 2008 – 2011.

Below you will find detailed technical specifications for John Deere 76F covering engine types, horsepower ratings, weight, height, fuel type and tank volume, oil capacity and type, hydraulic system diagram, wiring diagram, battery specs, etc.

John Deere 76F Production

Distributor: John Deere
Manufacturer: Goldoni
Type: Orchard/Vineyard tractor
Factory: Italy

John Deere 76F Mechanical

Chassis: 4×4 MFWD 4WD
Steering: power
Brakes: hydraulic wet disc
Transmissions: 8-speed


Type: open center
Pressure: 2828 psi
195.0 bar
Valves: 2 or 3
Total flow: 10 gpm
37.9 lpm
Steering press.: 1958 psi
135.0 bar

Tracktor Hitch

Rear Type: 1/1N/2
Rear lift (at 24″/610mm): 5,007 lbs
2271 kg

Power Take-off (PTO)

Rear PTO: independent
Rear RPM: 540

John Deere 76F Engine detail

Engine Detail
Detroit Diesel
turbocharged diesel
Displacement: 166 ci
2.7 L
Power: 76 hp
56.7 kW
Rated RPM: 2600
Torque: 192 lb-ft
260.4 Nm
Torque RPM: 1400

John Deere 76F Transmission overview

Engine Oil

Gears: 8 forward and reverse

John Deere 76F Dimensions

Wheelbase: 73 inches
185 cm
Width: 53 inches
134 cm
Shiping weight: 4,189 lbs
1900 kg (ROPS)
Clearance (front axle): 9.25 inches
23 cm (front axle)


Is John Deere 76F a good tractor?

The John Deere 76F is one of the great tractors in the Goldoni stable, and it has earned Goldoni a fantastic reputation.

How much oil does a John Deere 76F take?

Check out the John Deere 76F oil capacity and oil type in the engine specs section as it may vary across the engines. Keep in mind, that older models might have their oil capacity increased over time. You may compare between the early and late oil capacity.

Do tractors have VIN numbers?

Every tractor has a VIN number. The number is usually engraved below the driver’s seat. Tractor manufacturers put the number in different places on the tractor body.

What was the last year Goldoni made the 76F?

The John Deere 76F was an agricultural tractor model made from 2008 – 2011

How much can a John Deere 76F Pull?

The max pulling capacity of the John Deere 76F tractors starts at 5,920 lbs
2685 kg but may be slightly higher depending on the trim.

Leave a Comment