John Deere 830 Utility tractor Technical Specifications
John Deere 830 is a Row-Crop tractor that was produced by the John Deere between 1973 – 1975.
Below you will find detailed technical specifications for John Deere 830 covering engine types, horsepower ratings, weight, height, fuel type and tank volume, oil capacity and type, hydraulic system diagram, wiring diagram, battery specs, etc.
John Deere 830 Production
Manufacturer: | |
Manufacturer | John Deere |
Utility tractor | |
Factories | Dubuque, Iowa, USA |
Mannheim, Baden-Wurttemberg, Germany | |
Original price was $6,150 in 1975 |
Engine: | 28.02 hp 20.9 kW |
PTO (tested) | 35.30 hp 26.3 kW |
John Deere 830 Electrical
Ground | negative |
Battery volts | 12 |
John Deere 830 Mechanical
Two-wheel drive | |
Final drives | planetary |
Differential lock | mechanical rear |
Steering | power assist |
Differential hydraulic wet disc brakes | |
Open operator station. Two-post ROPS optional. |
Capacity
Fuel | 10.5 gal 39.7 L |
Hydraulic system | 7.9 gal 29.9 L |
Hydraulics
Type | open center |
Capacity | 7.9 gal 29.9 L |
Tracktor Hitch
Rear Type | I |
Rear lift | 2010 lbs 911 kg |
Power Take-off (PTO)
Rear PTO | live *Two-stage clutch |
Rear RPM | 540 (1.375) |
Engine RPM | 540@2100 |
John Deere 830 Engine detail
Engine Detail | |
John Deere | |
diesel | |
3-cylinder | |
liquid-cooled inline | |
Displacement | 151.9 ci 2.5 L |
Bore/Stroke | 3.858×4.33 inches 98 x 110 mm |
Air cleaner | dry |
Compression | 16.7:1 |
Rated RPM | 2400 |
Firing order | 1-2-3 |
Starter volts | 12 |
Oil capacity | 6 qts 5.7 L |
Coolant capacity | 11 qts 10.4 L |
Intake valve clearance | 0.014 inches 0.356 mm |
Exhaust valve clearance | 0.018 inches 0.457 mm |
Engine Oil |
Type | collar shift |
Gears | 8 forward and 4 reverse |
Clutch | dry disc |
John Deere 830 Dimensions
Wheelbase | 74.4 inches 188 cm |
Length | 134.8 inches 342 cm |
Width | 61.5 inches*Minimum width. 156 cm |
Operating weight | 4376 lbs 1984 kg |
Ballasted weight | 5714 lbs 2591 kg |
Ground clearance | 12.1 inches 30 cm |
Front tread | 49.6 to 73.2 inches 125 to 185 cm |
Rear tread | 49.6 to 79.4 inches 125 to 201 cm |
John Deere 830 Height | |
Steering wheel | 56.5 inches 143 cm |
Hood | 52.66 inches 133 cm |
Exhaust | 78 inches 198 cm |
John Deere 830 Tests
Nebraska Tractor Test 1146 | |
Diesel 8-speed 2WD October 13 – 19, 1973 Link: Nebraska Tractor Test 1146 file | |
PTO performance | |
Power at rated engine speed | 35.30 hp 26.3 kW |
Fuel use | 2.5 gal/hour 9.5 l/hour |
Power at rated PTO speed | 32.62 hp 24.3 kW |
Fuel use | 2.2 gal/hour 8.3 l/hour |
Drawbar performance | |
Max power | 28.02 hp 20.9 kW |
Fuel use | 2.4 gal/hour 9.1 l/hour |
Gear 5 used for power test. | |
Max pull | 4,252 lbs 1928 kg |
Gear 2 used for pull test. |
FAQ
Is John Deere 830 a good tractor?
The John Deere 830 is one of the great tractors in the John Deere stable, and it has earned John Deere a fantastic reputation.
How much oil does a John Deere 830 take?
Check out the John Deere 830 oil capacity and oil type in the engine specs section as it may vary across the engines. Keep in mind, that older models might have their oil capacity increased over time. You may compare between the early and late oil capacity.
Do tractors have VIN numbers?
Every tractor has a VIN number. The number is usually engraved below the driver’s seat. Tractor manufacturers put the number in different places on the tractor body.
What was the last year John Deere made the ?
The John Deere 830 was an agricultural tractor model made from 1973 – 1975
How much horsepower is a John Deere 830?
The engine tested at 28.02 hp
20.9 kW drawbar and 35.30 hp
26.3 kW kW PTO horsepower.
How much does a John Deere 830 tractor weight?
Depending on the engine type, the John Deere 830 weight ranges from 4376 lbs
1984 kg .
How much can a John Deere 830 Pull?
The max pulling capacity of the John Deere 830 tractors starts at 4,252 lbs
1928 kg but may be slightly higher depending on the trim.
How much can a John John Deere 830 Lift?
John Deere 830 tractor hitch is capable of lifting 2010 lbs
911 kg.