John Deere 90F

John Deere 90F Orchard/Vineyard tractor Technical Specifications

John Deere 90F is a Row-Crop tractor that was produced by the John Deere between 2009 – 2010.

Below you will find detailed technical specifications for John Deere 90F covering engine types, horsepower ratings, weight, height, fuel type and tank volume, oil capacity and type, hydraulic system diagram, wiring diagram, battery specs, etc.

John Deere 90F Production

Distributor: John Deere
Manufacturer: Goldini
Type: Orchard/Vineyard tractor
Factory: Italy

John Deere 90F Electrical

Ground: negative
Charging system: alternator
Battery volts: 12

John Deere 90F Mechanical

Chassis: 4×4 MFWD 4WD
Steering: power
Brakes: disc
Cab: Two-post mid-mount folding ROPS.
Transmissions: 16-speed


Type: open center
Pump flow: 7.9 gpm
29.9 lpm
  13.2 gpm
50.0 lpm *Optional

Tracktor Hitch

Rear Type: II/I
Rear lift (at ends): 5512 lbs
2500 kg

Power Take-off (PTO)

Rear RPM: 540/540E

John Deere 90F Engine detail

Engine Detail
John Deere
Displacement: 274.6 ci
4.5 L
Bore/Stroke: 4.19×5.00 inches
106 x 127 mm
Rated Power (EC 97/98): 82 hp
61.1 kW
Rated RPM: 2500
Torque: 213.9 lb-ft
290.0 Nm
Starter: electric
Starter volts: 12

John Deere 90F Transmission overview

Engine Oil

Gears: 16 forward and 8 reverse

John Deere 90F Dimensions

Wheelbase: 80.3 inches
203 cm
Length: 126 inches
320 cm
Height: 85.9 inches
218 cm
Weight: 5908 lbs
2679 kg


Is John Deere 90F a good tractor?

The John Deere 90F is one of the great tractors in the Goldini stable, and it has earned Goldini a fantastic reputation.

How much oil does a John Deere 90F take?

Check out the John Deere 90F oil capacity and oil type in the engine specs section as it may vary across the engines. Keep in mind, that older models might have their oil capacity increased over time. You may compare between the early and late oil capacity.

Do tractors have VIN numbers?

Every tractor has a VIN number. The number is usually engraved below the driver’s seat. Tractor manufacturers put the number in different places on the tractor body.

What was the last year Goldini made the 85F

The John Deere 90F was an agricultural tractor model made from 2009 – 2010

How much can a John Deere 90F Pull?

The max pulling capacity of the John Deere 90F tractors starts at 5,920 lbs
2685 kg but may be slightly higher depending on the trim.

Leave a Comment