John Deere 9200

John Deere 9200 9000 Series Technical Specifications

John Deere 9200 is a Row-Crop tractor that was produced by the John Deere between 1996 – 2001.

Below you will find detailed technical specifications for John Deere 9200 covering engine types, horsepower ratings, weight, height, fuel type and tank volume, oil capacity and type, hydraulic system diagram, wiring diagram, battery specs, etc.

John Deere 9200 Production

Manufacturer: John Deere
Type: Four-wheel Drive (4WD) tractor
Factory: Waterloo, Iowa, USA

John Deere 9200 Power

Engine: 310 hp
231.2 kW
PTO (claimed): 260 hp
193.9 kW
Drawbar (tested): 246.46 hp
183.8 kW
PTO (tested): 296.92 hp
221.4 kW

John Deere 9200 Electrical

Ground: negative
Charging system: alternator
Charging amps: 140
Batteries: 3
Battery CCA: 925
Battery volts: 12

John Deere 9200 Mechanical

Chassis: 4×4 articulated 4WD
Final drives: inboard planetary
Steering: hydrostatic power
Brakes: hydraulic wet disc
Cab: Cab standard.
Transmissions: 12-speed partially synchronized
  24-speed partial power shift
  12-speed full power shift


Fuel: 270 gal
1022.0 L
Hydraulic system: 26 gal
98.4 L


Type: closed center PFC
Capacity: 26 gal
98.4 L
Pressure: 2900 psi
200.0 bar
Valves: 3 to 5
Pump flow: 35 gpm
132.5 lpm
Total flow: 44 gpm
166.5 lpm

Tracktor Hitch

Rear Type: III
Rear lift: 13,871 lbs
6291 kg

Power Take-off (PTO)

Rear PTO: independent
Rear RPM: 1000 (optional)

John Deere 9200 Engine detail

Engine Detail
John Deere
turbocharged aftercooled diesel
liquid-cooled inline
Displacement: 643 ci
10.5 L
Bore/Stroke: 5.00×5.43 inches
127 x 138 mm
Power: 310 hp
231.2 kW
Compression: 16:1
Rated RPM: 2100
Coolant capacity: 56 qts
53.0 L

John Deere 9200 Transmission overview

Engine Oil

Transmission: John Deere Syncro
Type: partially synchronized
Gears: 12 forward and 3 reverse
Oil capacity: 147.2 qts
139.3 L (100mm axle)
  151.6 qts
143.5 L (110mm axle)
  151.2 qts
143.1 L (PTO 100mm axle)
  155.6 qts
147.3 L (PTO 110mm axle)
Three speeds (1-3 and reverse) in four ranges (A-D). Synchronized shifting between speeds using the clutch. Tractor must be stopped, and clutch used, to shift ranges. Reverse is not available in the highest (D) range.

John Deere 9200 Dimensions

Wheelbase: 137.8 inches
350 cm
Length: 274 inches
695 cm
Width: 158 inches
401 cm (duals)
Height (cab): 137.5 inches
349 cm
Shipping weight: 31,015 lbs
14068 kg
Ground clearance: 28.8 inches
73 cm (axles)
Front axle: 3.94 by 120 inches
100 by 3048 mm
Front axle: 4.31 by 120 inches
109 by 3048 mm
Rear axle: 3.94 by 120 inches
100 by 3048 mm
Rear axle: 4.31 by 120 inches
109 by 3048 mm

John Deere 9200 Tests

OCED Tractor Test 1731

OCED Tractor Test 1731
Diesel 24-speed 4WD
April 24 – May 15, 1997
Link: OCED Tractor Test 1731 file
PTO performance
Max power: 296.92 hp
221.4 kW
Fuel use: 16.2 gal/hour
61.3 l/hour
Power at rated engine speed: 265.72 hp
198.1 kW
Fuel use: 15.3 gal/hour
57.9 l/hour
Power at rated PTO speed: 296.92 hp
221.4 kW
Fuel use: 16.2 gal/hour
61.3 l/hour
Drawbar performance
Max power: 246.46 hp
183.8 kW
Fuel use: 15.5 gal/hour
58.7 l/hour
Max pull: 34057 lbs
15448 kg


Is John Deere 9200 a good tractor?

The John Deere 9200 is one of the great tractors in the John Deere stable, and it has earned John Deere a fantastic reputation.

How much oil does a John Deere 9200 take?

Check out the John Deere 9200 oil capacity and oil type in the engine specs section as it may vary across the engines. Keep in mind, that older models might have their oil capacity increased over time. You may compare between the early and late oil capacity.

Do tractors have VIN numbers?

Every tractor has a VIN number. The number is usually engraved below the driver’s seat. Tractor manufacturers put the number in different places on the tractor body.

What was the last year John Deere made the 9100

The John Deere 9200 was an agricultural tractor model made from 1996 – 2001

Leave a Comment