Massey Ferguson 184 Landini built Specs & Features

Contents show

Massey Ferguson 184 Landini built Technical Specifications

Massey Ferguson 184 is a Row-Crop tractor that was produced by the John Deere between 1980 – 1983.

Below you will find detailed technical specifications for Massey Ferguson 184 covering engine types, horsepower ratings, weight, height, fuel type and tank volume, oil capacity and type, hydraulic system diagram, wiring diagram, battery specs, etc.

Massey Ferguson 184 Production

Manufacturer:
Distributor:	Massey Ferguson
Manufacturer:	Landini
Type:	Utility tractor
Factory:	Italy

Massey Ferguson 184 Power

Engine:
Engine:	68 hp 50.7 kW
PTO (claimed):	62 hp 46.2 kW
Drawbar (tested):	51.04 hp 38.1 kW
PTO (tested):	62.45 hp 46.6 kW

Massey Ferguson 184 Electrical

Ground:	negative
Charging system:	alternator
Battery volts:	12

Massey Ferguson 184 Mechanical

Chassis:

4×2 2WD

4×4 MFWD 4WD

Final drives:

planetary

Steering:

hydrostatic power

Brakes:

dry disc

Cab:

Open operator station. Cab optional.

Transmission:

12-speed partially synchronized

Hydraulics

Type:	open center
Pump flow:	7.4 gpm 28.0 lpm

Tracktor Hitch

Rear Type:	II
Control:	position and draft control
Rear lift (at ends):	5070 lbs 2299 kg

Power Take-off (PTO)

Rear PTO:	independent
Rear RPM:	540/ground (1.375)
Engine RPM:	540@1944

Massey Ferguson 184 Engine detail

Engine Detail
Perkins A4.236
diesel
4-cylinder
liquid-cooled
Displacement:	235.8 ci 3.9 L
Bore/Stroke:	3.875×5.00 inches 98 x 127 mm
Power:	68 hp 50.7 kW
Fuel system:	direct injection
Rated RPM:	2200
Torque:	185.1 lb-ft 251.0 Nm
Torque RPM:	1300
Starter volts:	12

Massey Ferguson 184 Transmission overview

Engine Oil

Type:	partially synchronized
Gears:	12 forward and 4 reverse
Clutch:	280mm dry disc
Four gears in three ranges. Gears are synchronized.

Massey Ferguson 184 Dimensions

Wheelbase:	85.8 inches 217 cm
Length:	148.0 inches 375 cm
Front tread:	60 inches 152 cm (4WD)
Rear tread:	59.1 to 78.7 inches 150 to 199 cm

Massey Ferguson 184 Weight
	5,336 lbs 2420 kg (2WD)
	5,799 lbs 2630 kg (4WD)
Operating:	6380 lbs 2893 kg (4WD)
Ballasted:	7775 lbs 3526 kg (4WD with front and rear fluid)

Massey Ferguson 184 Tests

Nebraska Tractor Test 1392

Nebraska Tractor Test 1392
Diesel 12-speed 4WD May 11 – 20, 1981 Link: Nebraska Tractor Test 1392 file
PTO performance
Power at rated engine speed:	62.45 hp 46.6 kW
Fuel use:	4.1 gal/hour 15.5 l/hour
Power at rated PTO speed:	59.56 hp 44.4 kW
Fuel use:	3.6 gal/hour 13.6 l/hour
Drawbar performance
Max power:	51.04 hp 38.1 kW
Fuel use:	4.0 gal/hour 15.1 l/hour
Gear 9 used for power test.
Max pull:	7106 lbs 3223 kg
Gear 5 used for pull test.

FAQ

Is Massey Ferguson 184 a good tractor?

The Massey Ferguson 184 is one of the great tractors in the Landini stable, and it has earned Landini a fantastic reputation.

How much oil does a Massey Ferguson 184 take?

Check out the Massey Ferguson 184 oil capacity and oil type in the engine specs section as it may vary across the engines. Keep in mind, that older models might have their oil capacity increased over time. You may compare between the early and late oil capacity.

Do tractors have VIN numbers?

Every tractor has a VIN number. The number is usually engraved below the driver’s seat. Tractor manufacturers put the number in different places on the tractor body.

What was the last year Landini made the 174

The Massey Ferguson 184 was an agricultural tractor model made from 1980 – 1983