Massey Ferguson 390

Massey Ferguson 390 300 Series Technical Specifications

Massey Ferguson 390 is a Row-Crop tractor that was produced by the John Deere between 1987 – 1997.

Below you will find detailed technical specifications for Massey Ferguson 390 covering engine types, horsepower ratings, weight, height, fuel type and tank volume, oil capacity and type, hydraulic system diagram, wiring diagram, battery specs, etc.

Massey Ferguson 390 Production

















Manufacturer:
Manufacturer: Massey Ferguson
Type: Utility tractor
Factory: Coventry, England
Original price: $23,500 (1988 2WD )
Original price: $29,200 (1988 4WD )


Massey Ferguson 390 Power













Engine:
Engine: 76 hp
56.7 kW
PTO (claimed): 69 hp
51.5 kW
Drawbar (tested): 55.5 hp
41.4 kW
PTO (tested): 67.3 hp
50.2 kW

Massey Ferguson 390 Electrical



















Ground: negative
Charging system: alternator
Charging amps: 45
Battery CCA: 420 (2x)
  540 (1x)
Battery volts: 12

Massey Ferguson 390 Mechanical




























Chassis: 4×2 2WD
  4×4 MFWD 4WD
Steering: power
Brakes: wet disc
Cab: Two-post ROPS. Canopy optional.
Transmissions: 12-speed synchromesh
  12-speed two-speed power shift

Hydraulics



















Type: open center
Pressure: 3000 psi
206.8 bar
Pump flow: 4.4 gpm
16.7 lpm (linkage pump) 7.2 (opt. linkage pump)
  9.5 gpm
36.0 lpm (aux. pump)
Total flow: 13.9 gpm
52.6 lpm
  16.8 gpm
63.6 lpm *Optional

Tracktor Hitch



















Rear Type: II
Control: position and draft control
Rear lift: 4250 lbs
1927 kg *Capacity through full lift range
Rear lift (at ends): 5701 lbs
2585 kg (fixed-end) *Capacity with links horizontal
  6744 lbs
3059 kg (fixed-end with assist ram) *Capacity with links horizontal
  5410 lbs
2453 kg (wrist-action) *Capacity with links horizontal

Power Take-off (PTO)










Rear PTO: independent
Rear RPM: 540 (1.375)
  540/1000 (1.375)

Massey Ferguson 390 Engine detail























































Engine Detail
Perkins A4.248
diesel
4-cylinder
liquid-cooled
Displacement: 248 ci
4.1 L
Bore/Stroke: 3.975×5.00 inches
101 x 127 mm
Power: 76 hp
56.7 kW
Fuel system: direct injection
Air cleaner: dual dry element
Compression: 16:1
Rated RPM: 2200
Idle RPM: 750-2380
Torque: 206 lb-ft
279.3 Nm
Torque RPM: 1400
Firing order: 1-3-4-2
Starter: electric
Starter volts: 12
Oil capacity: 7.9 qts
7.5 L
Coolant capacity: 16 qts
15.1 L



Massey Ferguson 390 Transmission overview

Engine Oil






Type: synchromesh
Gears: 12 forward and 4 reverse

Massey Ferguson 390 Dimensions































2WD Wheelbase: 84.1 inches
213 cm
4WD Wheelbase: 92.5 inches
234 cm
2WD Length: 144.4 inches
366 cm
4WD Length: 152.8 inches
388 cm
Width: 77.7 inches
197 cm
2WD Weight: 6036 lbs
2737 kg
4WD Weight: 7266 lbs
3295 kg
2WD Clearance (front axle): 20.9 inches
53 cm
4WD Clearance (front axle): 16.9 inches
42 cm
Clearance (drawbar): 14.9 inches
37 cm



















Massey Ferguson 390 Height
Steering wheel: 70.1 inches
178 cm
ROPS: 99.4 inches
252 cm
Cab: 99.6 inches
252 cm (LoLine)
  104.3 inches
264 cm (HiLine)
Exhaust: 97.8 inches
248 cm

Massey Ferguson 390 Tests

OCED Tractor Test 1102













































OCED Tractor Test 1102
Diesel 12-speed 2WD
June 1987 – September 1987,
Link: OCED Tractor Test 1102 file
PTO performance
Power at rated engine speed: 67.3 hp
50.2 kW
Fuel use: 4.4 gal/hour
16.7 l/hour
Power at rated PTO speed: 63.8 hp
47.6 kW
Fuel use: 3.9 gal/hour
14.8 l/hour
Drawbar performance
Max power: 55.5 hp
41.4 kW
Fuel use: 4.3 gal/hour
16.3 l/hour
Gear 2HM used for power test.
Max pull: 5015 lbs
2274 kg
Gear 3L used for pull test.










OCED Tractor Test 1101









































OCED Tractor Test 1101
Diesel 12-speed 4WD
June 1987 – September 1987,
Link: OCED Tractor Test 1101 file
PTO performance
Power at rated engine speed: 67.3 hp
50.2 kW
Fuel use: 4.3 gal/hour
16.3 l/hour
Power at rated PTO speed: 63.4 hp
47.3 kW
Fuel use: 3.8 gal/hour
14.4 l/hour
Drawbar performance
Max power: 55.4 hp
41.3 kW
Fuel use: 4.5 gal/hour
17.0 l/hour
Gear 2HL used for power test.
Max pull: 6790 lbs
3079 kg
Gear 2LH used for pull test.

FAQ

Is Massey Ferguson 390 a good tractor?

The Massey Ferguson 390 is one of the great tractors in the Massey Ferguson stable, and it has earned Massey Ferguson a fantastic reputation.

How much oil does a Massey Ferguson 390 take?

Check out the Massey Ferguson 390 oil capacity and oil type in the engine specs section as it may vary across the engines. Keep in mind, that older models might have their oil capacity increased over time. You may compare between the early and late oil capacity.

Do tractors have VIN numbers?

Every tractor has a VIN number. The number is usually engraved below the driver’s seat. Tractor manufacturers put the number in different places on the tractor body.

What was the last year Massey Ferguson made the 383

The Massey Ferguson 390 was an agricultural tractor model made from 1987 – 1997

Leave a Comment