Massey Ferguson 4225 Utility tractor Technical Specifications
Massey Ferguson 4225 is a Row-Crop tractor that was produced by the John Deere between 1997 – 2001.
Below you will find detailed technical specifications for Massey Ferguson 4225 covering engine types, horsepower ratings, weight, height, fuel type and tank volume, oil capacity and type, hydraulic system diagram, wiring diagram, battery specs, etc.
Massey Ferguson 4225 Production
Manufacturer: | |
Manufacturer | Massey Ferguson |
Utility tractor | |
Built in Coventry, England | |
Original price was $26,800 in 1999 |
Engine: | 42.5 hp 31.7 kW |
PTO (tested) | 55.4 hp 41.3 kW |
Massey Ferguson 4225 Electrical
Ground | negative |
Charging system | alternator |
Charging amps | 45 (ROPS) |
70 (Cab) | |
Batteries | 2 |
Battery CCA | 590 |
Battery volts | 12 |
Massey Ferguson 4225 Mechanical
Two- or four-wheel drive | |
Final drives | outboard planetary |
Steering | hydrostatic power |
Independent hydraulic wet disc brakes | |
Two-post foldable ROPS. Cab optional with air-conditioning. |
Capacity
Fuel | 29.1 gal (ROPS) 110.1 L |
26 gal (Cab) 98.4 L | |
Hydraulic system | 13.2 gal 50.0 L |
Hydraulics
Type | open center |
Capacity | 13.2 gal 50.0 L |
Pressure | 3046 psi 210.0 bar |
Valves | 2 to 4 |
Pump flow | 10 gpm 37.9 lpm |
14 gpm (combined) 53.0 lpm | |
17.4 gpm (combined opt.) 65.9 lpm |
Tracktor Hitch
Rear Type | II |
Control | position and draft control |
Rear lift (at ends) | 4339 lbs 1968 kg |
4984 lbs (optional) 2260 kg |
Power Take-off (PTO)
Rear PTO | independent |
Clutch | hydraulic wet disc |
Rear RPM | 540 (1.375) |
540/1000 (1.375) |
Massey Ferguson 4225 Engine detail
Engine Detail | |
Perkins 1004.40 | |
diesel | |
4-cylinder | |
liquid-cooled | |
Displacement | 243.5 ci 4.0 L |
Bore/Stroke | 3.937×5.00 inches 100 x 127 mm |
Air cleaner | dual paper elements |
Pre-heating | thermostart |
Compression | 17.3:1 |
Rated RPM | 2200 |
Torque | 188 lb-ft 254.9 Nm |
Torque RPM | 1200 |
Firing order | 1-3-4-2 |
Starter volts | 12 |
Oil capacity | 6.8 qts 6.4 L |
Coolant capacity | 18.4 qts 17.4 L |
Engine Oil |
Type | nonsynchronized gear |
Gears | 8 forward and 2 reverse |
Standard transmission on the ROPS-equipped 4225. |
Massey Ferguson 4225 Dimensions
Wheelbase | 93 inches 236 cm |
Length | 154 inches (2WD) 391 cm |
155 inches (4WD) 393 cm | |
Width | 77 inches (min) 195 cm |
Front axle | 2WD |
Front axle | 2WD LoProfile |
Front axle | 4WD |
Flange rear axle | |
Front tread | 52 to 76 inches 132 to 193 cm (2WD) |
Front tread | 55 to 75 inches 139 to 190 cm (4WD) |
Rear tread | 60 to 84 inches 152 to 213 cm |
Massey Ferguson 4225 Weight | |
6114 lbs (2WD ROPS) 2773 kg | |
6935 lbs (2WD Cab) 3145 kg | |
6665 lbs (4WD ROPS) 3023 kg | |
7487 lbs (4WD Cab) 3396 kg | |
Operating | 7,630 lbs 3460 kg |
Max rear axle | 10000 lbs 4536 kg |
Massey Ferguson 4225 Height | |
Steering wheel | 72 inches 182 cm |
65 inches (LoProfile) 165 cm | |
ROPS | 102 inches 259 cm |
79 inches (folded) 200 cm | |
Cab | 97 inches 246 cm |
Massey Ferguson 4225 Tests
OCED Tractor Test 1779 | |
Diesel 12-speed shuttle 4WD March 1 – May 1, 1998 Link: OCED Tractor Test 1779 file | |
PTO performance | |
Max power | 55.4 hp 41.3 kW |
Fuel use | 3.7 gal/hour 14.0 l/hour |
Power at rated engine speed | 54.8 hp 40.9 kW |
Fuel use | 3.8 gal/hour 14.4 l/hour |
Power at rated PTO speed | 53.4 hp 39.8 kW |
Fuel use | 3.4 gal/hour 12.9 l/hour |
Drawbar performance | |
Max power | 42.5 hp 31.7 kW |
Fuel use | 3.6 gal/hour 13.6 l/hour |
Gear 1M used for power test. | |
Max pull | 7,680 lbs 3483 kg |
Gear 1L used for pull test. |
FAQ
Is Massey Ferguson 4225 a good tractor?
The Massey Ferguson 4225 is one of the great tractors in the Massey Ferguson stable, and it has earned Massey Ferguson a fantastic reputation.
How much oil does a Massey Ferguson 4225 take?
Check out the Massey Ferguson 4225 oil capacity and oil type in the engine specs section as it may vary across the engines. Keep in mind, that older models might have their oil capacity increased over time. You may compare between the early and late oil capacity.
Do tractors have VIN numbers?
Every tractor has a VIN number. The number is usually engraved below the driver’s seat. Tractor manufacturers put the number in different places on the tractor body.
What was the last year Massey Ferguson made the ?
The Massey Ferguson 4225 was an agricultural tractor model made from 1997 – 2001
How much horsepower is a Massey Ferguson 4225?
The engine tested at 42.5 hp
31.7 kW drawbar and 55.4 hp
41.3 kW kW PTO horsepower.
How much does a Massey Ferguson 4225 tractor weight?
Depending on the engine type, the Massey Ferguson 4225 weight ranges from 6114 to 7630 pounds .
How much can a Massey Ferguson 4225 Pull?
The max pulling capacity of the Massey Ferguson 4225 tractors starts at 7,680 lbs
3483 kg but may be slightly higher depending on the trim.