Oliver 80 Technical Specifications
Oliver 80 is a Row-Crop tractor that was produced by the John Deere between 1937 – 1948.
Below you will find detailed technical specifications for Oliver 80 covering engine types, horsepower ratings, weight, height, fuel type and tank volume, oil capacity and type, hydraulic system diagram, wiring diagram, battery specs, etc.
Oliver 80 Production
Manufacturer: | |
Manufacturer | Oliver |
Row-Crop tractor | |
Built in Charles City, Iowa, USA |
Engine: | 29.92 hp 22.3 kW |
Belt (tested) | 38.78 hp 28.9 kW |
Oliver 80 Mechanical
Two-wheel drive | |
Steering | manual |
Open operator station. |
Oliver 80 Engine detail
Engine Detail | |
Waukesha-Oliver | |
kerosene | |
4-cylinder | |
liquid-cooled | |
Displacement | 334 ci 5.5 L |
Bore/Stroke | 4.50×5.25 inches 114 x 133 mm |
Air cleaner | oil bath |
Rated RPM | 1200 |
Starter type | hand-crank |
Engine Oil |
Type | gear |
Gears | 3 forward and 1 reverse |
Clutch | dry disc |
Oliver 80 Dimensions
Weight | 4,800 lbs 2177 kg |
Front tread | 5.5 to inches 13 to 0 cm |
Rear tread | 60 to 72 inches 152 to 182 cm |
Oliver 80 Tests
Nebraska Tractor Test 300 | |
Kerosene 3-speed 2WD May 16 – 26, 1938 Link: Nebraska Tractor Test 300 file | |
Belt power (max) | 38.78 hp 28.9 kW |
Belt fuel use (max) | 5.0 gal/hour 18.9 l/hour |
Drawbar performance | |
Max power | 29.92 hp 22.3 kW |
Gear 2 used for power test. | |
Max pull | 3,785 lbs 1716 kg |
Gear 1 used for pull test. |
FAQ
Is Oliver 80 a good tractor?
The Oliver 80 is one of the great tractors in the Oliver stable, and it has earned Oliver a fantastic reputation.
How much oil does a Oliver 80 take?
Check out the Oliver 80 oil capacity and oil type in the engine specs section as it may vary across the engines. Keep in mind, that older models might have their oil capacity increased over time. You may compare between the early and late oil capacity.
Do tractors have VIN numbers?
Every tractor has a VIN number. The number is usually engraved below the driver’s seat. Tractor manufacturers put the number in different places on the tractor body.
What was the last year Oliver made the ?
The Oliver 80 was an agricultural tractor model made from 1937 – 1948
How much does a Oliver 80 tractor weight?
Depending on the engine type, the Oliver 80 weight ranges from 4,800 lbs
2177 kg .
How much can a Oliver 80 Pull?
The max pulling capacity of the Oliver 80 tractors starts at 3,785 lbs
1716 kg but may be slightly higher depending on the trim.