Oliver 950 Standard-tread tractor Technical Specifications
Oliver 950 is a Row-Crop tractor that was produced by the John Deere between 1958 – 1961.
Below you will find detailed technical specifications for Oliver 950 covering engine types, horsepower ratings, weight, height, fuel type and tank volume, oil capacity and type, hydraulic system diagram, wiring diagram, battery specs, etc.
Oliver 950 Production
Manufacturer: | |
Manufacturer | Oliver |
Standard-tread tractor | |
Built in Charles City, Iowa, USA | |
Original price | $5,900 (1961) |
Engine: | 48.76 hp 36.4 kW |
Belt (tested) | 67.23 hp 50.1 kW |
Oliver 950 Mechanical
Two-wheel drive | |
Steering | power |
Disc brakes | |
Open operator station. |
Power Take-off (PTO)
Rear PTO | independent |
Rear RPM | 540 |
Oliver 950 Engine detail
Engine Detail | |
Waukesha-Oliver | |
diesel | |
6-cylinder | |
liquid-cooled | |
Displacement | 302 ci 4.9 L |
Bore/Stroke | 4.00×4.00 inches 102 x 102 mm |
Compression | 16:1 |
Rated RPM | 1800 |
Starter volts | 12 |
Engine Oil |
Type | gear |
Gears | 6 forward and 2 reverse |
Clutch | dry disc |
Oliver 950 Dimensions
Wheelbase | 79.875 inches 202 cm |
Operating weight | 10400 lbs 4717 kg |
Ballasted weight | 13620 lbs 6178 kg |
Front tread | 60 inches 152 cm |
Rear tread | 62 inches 157 cm |
Oliver 950 Tests
Nebraska Tractor Test 660 | |
Diesel 6-speed 2WD July 7 – 17, 1958 Link: Nebraska Tractor Test 660 file | |
Belt power (max) | 67.23 hp 50.1 kW |
Belt fuel use (max) | 4.8 gal/hour 18.2 l/hour |
Drawbar performance | |
Max power | 48.76 hp 36.4 kW |
Fuel use | 4.0 gal/hour 15.1 l/hour |
Gear 3 used for power test. | |
Max pull | 10011 lbs 4540 kg |
Gear 1 used for pull test. |
FAQ
Is Oliver 950 a good tractor?
The Oliver 950 is one of the great tractors in the Oliver stable, and it has earned Oliver a fantastic reputation.
How much oil does a Oliver 950 take?
Check out the Oliver 950 oil capacity and oil type in the engine specs section as it may vary across the engines. Keep in mind, that older models might have their oil capacity increased over time. You may compare between the early and late oil capacity.
Do tractors have VIN numbers?
Every tractor has a VIN number. The number is usually engraved below the driver’s seat. Tractor manufacturers put the number in different places on the tractor body.
What was the last year Oliver made the ?
The Oliver 950 was an agricultural tractor model made from 1958 – 1961
How much does a Oliver 950 tractor weight?
Depending on the engine type, the Oliver 950 weight ranges from 10400 lbs
4717 kg .
How much can a Oliver 950 Pull?
The max pulling capacity of the Oliver 950 tractors starts at 10011 lbs
4540 kg but may be slightly higher depending on the trim.