Challenger MT755D Agricultural Crawler tractor Specs & Features

Contents show

Challenger MT755D Agricultural Crawler tractor Technical Specifications

Challenger MT755D is a Row-Crop tractor that was produced by the John Deere between 2012 – 2013.

Below you will find detailed technical specifications for Challenger MT755D covering engine types, horsepower ratings, weight, height, fuel type and tank volume, oil capacity and type, hydraulic system diagram, wiring diagram, battery specs, etc.

Challenger MT755D Production

Manufacturer:
Manufacturer:	Challenger (a part of AGCO)
Type:	Agricultural Crawler tractor
Factory:	Jackson, Minnesota, USA

Challenger MT755D Power

Engine:
Engine (gross):	327 hp 243.8 kW
PTO (claimed):	260 hp 193.9 kW
Drawbar (tested):	251.60 hp 187.6 kW
PTO (tested):	317.51 hp 236.8 kW

Challenger MT755D Electrical

Ground:	negative
Charging system:	alternator
Charging amps:	300 (2x 150amp)
Batteries:	2
Battery volts:	12

Challenger MT755D Mechanical

Chassis:

crawler

Steering:

electro-hydraulic differential

Brakes:

hydraulic wet disc

Cab:

Cab standard.

Transmission:

16-speed full power shift

Hydraulics

Type:	closed-center pressure-flow compensated (PFC)
Pressure:	2900 psi 200.0 bar
Valves:	4 to 6
Pump flow:	43.5 gpm 164.6 lpm
	59 gpm 223.3 lpm (optional)
SCV flow:	36 gpm 136.3 lpm

Tracktor Hitch

Rear Type:	III/IIIN
Rear lift:	16000 lbs 7257 kg

Power Take-off (PTO)

Rear PTO:	independent
Rear RPM:	1000 (1.75)

Challenger MT755D Engine detail

Engine Detail
AGCO POWER
turbocharged air-to-air intercooled diesel
6-cylinder 24-valve
liquid-cooled
Displacement:	513.8 ci 8.4 L
Bore/Stroke:	4.370×5.709 inches 111 x 145 mm
Emissions:	Interim Tier IV
Emission control:	selective catalytic reduction (SCR)
Power (gross):	327 hp 243.8 kW
Maximum Power:	361 hp 269.2 kW
Starter volts:	12

Challenger MT755D Transmission overview

Engine Oil

Transmission:	Caterpillar
Type:	full power shift
Gears:	16 forward and 4 reverse
Clutch:	hydraulic wet disc

Challenger MT755D Dimensions

Gauge:	72 to 88 inches 182 to 223 cm
Gauge:	80 to 120 inches 203 to 304 cm (optional)
Gauge:	120 to 160 inches 304 to 406 cm (optional)

Challenger MT755D Weight
Shipping:	31075 lbs 14095 kg
Max capacity:	36000 lbs 16329 kg
Max Drawbar:	10000 lbs 4536 kg
	12000 lbs 5443 kg (Cat. 3)

Challenger MT755D Tests

OCED Tractor Test 2061

OCED Tractor Test 2061
Diesel 16-speed crawler May 21 – 30, 2013 Link: OCED Tractor Test 2061 file
PTO performance
Max power:	317.51 hp 236.8 kW
Fuel use:	16.4 gal/hour 62.1 l/hour
Power at rated engine speed:	281.41 hp 209.8 kW
Fuel use:	15.5 gal/hour 58.7 l/hour
Power at rated PTO speed:	308.55 hp 230.1 kW
Fuel use:	16.5 gal/hour 62.5 l/hour
Drawbar performance
Max power:	251.60 hp 187.6 kW
Fuel use:	15.5 gal/hour 58.7 l/hour
Gear 8 used for power test.
Max pull:	31017 lbs 14069 kg
Gear 3 used for pull test.

FAQ

Is Challenger MT755D a good tractor?

The Challenger MT755D is one of the great tractors in the Challenger (a part of AGCO) stable, and it has earned Challenger (a part of AGCO) a fantastic reputation.

How much oil does a Challenger MT755D take?

Check out the Challenger MT755D oil capacity and oil type in the engine specs section as it may vary across the engines. Keep in mind, that older models might have their oil capacity increased over time. You may compare between the early and late oil capacity.

Do tractors have VIN numbers?

Every tractor has a VIN number. The number is usually engraved below the driver’s seat. Tractor manufacturers put the number in different places on the tractor body.

What was the last year Challenger (a part of AGCO) made the MT755D?

The Challenger MT755D was an agricultural tractor model made from 2012 – 2013