Oliver 1800 Series A 4-Digit Series Technical Specifications
Oliver 1800 Series A is a Row-Crop tractor that was produced by the John Deere between 1960 – 1964.
Below you will find detailed technical specifications for Oliver 1800 Series A covering engine types, horsepower ratings, weight, height, fuel type and tank volume, oil capacity and type, hydraulic system diagram, wiring diagram, battery specs, etc.
Oliver 1800 Series A Production
Manufacturer: | |
Manufacturer | Oliver |
Row-Crop tractor | |
Built in Charles City, Iowa, USA |
Engine: | 62.55 hp 46.6 kW |
PTO (tested) | 73.92 hp 55.1 kW |
Oliver 1800 Series A Mechanical
Two-wheel drive | |
Steering | power assist |
Disc brakes | |
Open operator station. |
Power Take-off (PTO)
Rear PTO | independent |
Rear RPM | 540/1000 |
Title serial numbers
Location: | Serial plate on instrument panel. |
1960 | 90-525 |
1961 | 111-025 |
1962 | 118-344 |
Final | 124-395 |
FAQ: How to read a serial number table. |
What year is my Oliver 1800 Series A? Serial Number Decoder
The serial number list shows the first tractor built in each year. The other tractors for that year will have successively higher numbers. Your serial number should be between two of the stated numbers.
The list only includes the numbers of the first tractors produced in each year. Your serial should be somewhere between two numbers.Unless you happen to be the first person to own a tractor, your number will not appear on the list.
Oliver 1800 Series A Engine detail
Engine Detail | |
Waukesha-Oliver | |
diesel | |
6-cylinder | |
liquid-cooled | |
Displacement | 283 ci 4.6 L |
Bore/Stroke | 3.875×4.00 inches 98 x 102 mm |
Air cleaner | oil bath |
Compression | 16:1 |
Rated RPM | 2000 |
Starter volts | 12 |
Engine Oil |
Type | gear |
Gears | 6 forward and 2 reverse |
Clutch | dry disc |
Oliver 1800 Series A Dimensions
Wheelbase | 103 inches 261 cm |
Length | 159.5 inches 405 cm |
Width | 86.4 inches 219 cm |
Height (steering wheel) | 80 inches 203 cm |
Operating weight | 8,585 lbs 3894 kg |
Ballasted weight | 14,345 lbs 6506 kg |
Ground clearance | 25.5 inches 64 cm |
Front tread | 9.25/14.5 inches 23/36 cm (tricycle) |
Rear tread | 68 to 89.5 inches 172 to 227 cm |
Oliver 1800 Series A Tests
Nebraska Tractor Test 766 | |||
Nebraska Tractor Test 766 | |
Gasoline 6-speed 2WD October 3 – 11, 1960 Link: Nebraska Tractor Test 766 file | |
PTO performance | |
Power at rated engine speed | 73.92 hp 55.1 kW |
Fuel use | 5.6 gal/hour 21.2 l/hour |
Drawbar performance | |
Max power | 61.66 hp 46.0 kW |
Fuel use | 5.3 gal/hour 20.1 l/hour |
Gear 4 used for power test. | |
Max pull | 10,619 lbs 4816 kg |
Gear 1 used for pull test. |
Nebraska Tractor Test 767 | |||
Nebraska Tractor Test 767 | |
Diesel 6-speed 2WD October 4 – 12, 1960 Link: Nebraska Tractor Test 767 file | |
PTO performance | |
Power at rated engine speed | 70.2 hp 52.3 kW |
Fuel use | 4.9 gal/hour 18.5 l/hour |
Drawbar performance | |
Max power | 62.55 hp 46.6 kW |
Fuel use | 4.8 gal/hour 18.2 l/hour |
Gear 4 used for power test. | |
Max pull | 11,040 lbs 5007 kg |
Gear 1 used for pull test. |
FAQ
Is Oliver 1800 Series A a good tractor?
The Oliver 1800 Series A is one of the great tractors in the Oliver stable, and it has earned Oliver a fantastic reputation.
How much oil does a Oliver 1800 Series A take?
Check out the Oliver 1800 Series A oil capacity and oil type in the engine specs section as it may vary across the engines. Keep in mind, that older models might have their oil capacity increased over time. You may compare between the early and late oil capacity.
Do tractors have VIN numbers?
Every tractor has a VIN number. The number is usually engraved below the driver’s seat. Tractor manufacturers put the number in different places on the tractor body.
What was the last year Oliver made the 1800?
The Oliver 1800 Series A was an agricultural tractor model made from 1960 – 1964
How much horsepower is a Oliver 1800 Series A?
The 1800 engine tested at 62.55 hp
46.6 kW drawbar and 73.92 hp
55.1 kW kW PTO horsepower.
How much does a Oliver 1800 Series A tractor weight?
Depending on the engine type, the Oliver 1800 Series A weight ranges from 8,585 lbs
3894 kg .
How much can a Oliver 1800 Series A Pull?
The max pulling capacity of the Oliver 1800 Series A tractors starts at 10,619 lbs
4816 kg but may be slightly higher depending on the trim.
Where is the serial number on a Oliver 1800 Series A?
Lookup serial plate on instrument panel.