Oliver 880 Technical Specifications
Oliver 880 is a Row-Crop tractor that was produced by the John Deere between 1958 – 1963.
Below you will find detailed technical specifications for Oliver 880 covering engine types, horsepower ratings, weight, height, fuel type and tank volume, oil capacity and type, hydraulic system diagram, wiring diagram, battery specs, etc.
Oliver 880 Production
Manufacturer: | |
Manufacturer | Oliver |
Row-Crop tractor | |
Built in Charles City, Iowa, USA | |
Original price was $5,000 in 1963 |
Engine: | 54.92 hp 41.0 kW |
Belt (tested) | 61.86 hp 46.1 kW |
Oliver 880 Mechanical
Two-wheel drive | |
Manual steering | |
Differential mechanical disc brakes | |
Open operator station. |
Tracktor Hitch
Rear Type | II/I |
Power Take-off (PTO)
Rear PTO | independent |
Rear RPM | 540 |
Title serial numbers
1958 | 60505 |
1959 | 71640 |
1960 | 84555 |
1961 | 111262 |
1962 | 117640 |
1963 | 128911 |
FAQ: How to read a serial number table. |
What year is my Oliver 880? Serial Number Decoder
The serial number list shows the first tractor built in each year. The other tractors for that year will have successively higher numbers. Your serial number should be between two of the stated numbers.
The list only includes the numbers of the first tractors produced in each year. Your serial should be somewhere between two numbers.Unless you happen to be the first person to own a tractor, your number will not appear on the list.
Oliver 880 Engine detail
Engine Detail | |
Waukesha-Oliver | |
nautral gasoline | |
6-cylinder | |
liquid-cooled vertical I-head | |
Displacement | 265.1 ci 4.3 L |
Bore/Stroke | 3.75×4.00 inches 95 x 102 mm |
Air cleaner | oil bath |
Compression | 7.3:1 |
Rated RPM | 1750 |
Firing order | 1-5-3-6-2-4 |
Starter volts | 12 |
Oil capacity | 8 qts 7.6 L |
Coolant capacity | 18 qts 17.0 L |
Engine Oil |
Type | constant mesh |
Gears | 6 forward and 2 reverse |
Clutch | dry disc |
Oliver 880 Dimensions
Wheelbase | 94 inches 238 cm |
Length | 144 inches 365 cm |
Width | 92 inches 233 cm |
Operating weight | 5640 lbs 2558 kg |
Ballasted weight | 10845 lbs 4919 kg |
Front tread | 8.1/12.1 inches 20/30 cm |
Rear tread | 60 to 92.5 inches 152 to 234 cm |
Oliver 880 Tests
Nebraska Tractor Test 647 | |
Gasoline 6-speed 2WD April 21 – May 1, 1958 Link: Nebraska Tractor Test 647 file | |
Belt power (max) | 61.86 hp 46.1 kW |
Belt fuel use (max) | 5.4 gal/hour 20.4 l/hour |
Drawbar performance | |
Max power | 54.92 hp 41.0 kW |
Gear 4 used for power test. | |
Max pull | 7,998 lbs 3627 kg |
Gear 1 used for pull test. |
Nebraska Tractor Test 650 | |||
Nebraska Tractor Test 650 | |
Diesel 6-speed 2WD April 23 – May 7, 1958 Link: Nebraska Tractor Test 650 file | |
Belt power (max) | 59.48 hp 44.4 kW |
Belt fuel use (max) | 4.0 gal/hour 15.1 l/hour |
Drawbar performance | |
Max power | 50.88 hp 37.9 kW |
Gear 4 used for power test. | |
Max pull | 8,118 lbs 3682 kg |
Gear 1 used for pull test. |
FAQ
Is Oliver 880 a good tractor?
The Oliver 880 is one of the great tractors in the Oliver stable, and it has earned Oliver a fantastic reputation.
How much oil does a Oliver 880 take?
Check out the Oliver 880 oil capacity and oil type in the engine specs section as it may vary across the engines. Keep in mind, that older models might have their oil capacity increased over time. You may compare between the early and late oil capacity.
Do tractors have VIN numbers?
Every tractor has a VIN number. The number is usually engraved below the driver’s seat. Tractor manufacturers put the number in different places on the tractor body.
What was the last year Oliver made the 880?
The Oliver 880 was an agricultural tractor model made from 1958 – 1963
How much does a Oliver 880 tractor weight?
Depending on the engine type, the Oliver 880 weight ranges from 5640 lbs
2558 kg .
How much can a Oliver 880 Pull?
The max pulling capacity of the Oliver 880 tractors starts at 7,998 lbs
3627 kg but may be slightly higher depending on the trim.