CaseIH 9240 Four-wheel Drive (4WD) tractor Specs & Features

Contents show

CaseIH 9240 Four-wheel Drive (4WD) tractor Technical Specifications

CaseIH 9240 is a Row-Crop tractor that was produced by the John Deere between 1990 – 1995.

Below you will find detailed technical specifications for CaseIH 9240 covering engine types, horsepower ratings, weight, height, fuel type and tank volume, oil capacity and type, hydraulic system diagram, wiring diagram, battery specs, etc.

CaseIH 9240 Production

Manufacturer:
Manufacturer:	CaseIH
Type:	Four-wheel Drive (4WD) tractor
Factory:	Fargo, North Dakota, USA
Original price:	$105,000 (1995)
The 9260 and 9240 were the last of the rigid-frame 4WD with four-wheel steering, in the style of the large J.I. Case “crab steer” tractors.

CaseIH 9240 Power

Engine:
Engine:	235 hp 175.2 kW
PTO (claimed):	207 hp 154.4 kW
Drawbar (tested):	175.89 hp 131.2 kW
PTO (tested):	215.87 hp 161.0 kW

CaseIH 9240 Electrical

Ground:	negative
Battery volts:	12

CaseIH 9240 Mechanical

Chassis:

4×4 4WD

Steering:

four-wheel hydrostatic power

Brakes:

integrated hydraulic caliper disc

Cab:

Cab standard with air-conditioning. Optional deluxe cab adds side and rear windowwipers plus internal storage compartments.

Transmission:

12-speed full power shift

Capacity

Fuel:	200 gal 757.0 L
Hydraulic system:	18 gal 68.1 L

Hydraulics

Type:	closed center load sensing pressure compensting
Capacity:	18 gal 68.1 L
Pressure:	2500 psi 172.4 bar
Valves:	4
Total flow:	28 gpm 106.0 lpm

Tracktor Hitch

Optional Rear Type:	III
Control:	optional
Rear lift:	12,750 lbs 5783 kg

Power Take-off (PTO)

Optional Rear PTO:	independent
Rear RPM:	1000
Engine RPM:	1000@2098

CaseIH 9240 Engine detail

Engine Detail
CDC
turbocharged aftercooled diesel
6-cylinder
liquid-cooled
Displacement:	504.5 ci 8.3 L
Bore/Stroke:	4.488×5.315 inches 114 x 135 mm
Power:	235 hp 175.2 kW
Air cleaner:	dual paper elements
Compression:	16.5:1
Rated RPM:	2200
Torque:	701 lb-ft 950.6 Nm
Torque RPM:	1500
Starter volts:	12
Oil capacity:	22 qts 20.8 L
Coolant capacity:	29.6 qts 28.0 L

CaseIH 9240 Transmission overview

Engine Oil

Type:	full power shift
Gears:	12 forward and 3 reverse
Clutch:	hydraulic wet disc
Full power shift transmission operated with two right-hand levers; one for shifting gears and the other for forward/reverse. Skip-Shift feature allows the transmission to quickly shift from first into higher gears (4th, 6th, 8th).

CaseIH 9240 Dimensions

Wheelbase:	124 inches 314 cm
Length:	250.3 inches 635 cm
Minimum Width:	93.5 inches 237 cm
Duals Width:	151.8 inches 385 cm
Height (exhaust):	143.0 inches 363 cm
Operating weight:	28,214 lbs 12797 kg (20.8R38 duals)

CaseIH 9240 Tests

OCED Tractor Test 1650

OCED Tractor Test 1650
Diesel 12-speed 4WD June 5 – 14, 1991 Link: OCED Tractor Test 1650 file
PTO performance
Max power:	215.87 hp 161.0 kW
Fuel use:	11.8 gal/hour 44.7 l/hour
Power at rated engine speed:	200.53 hp 149.5 kW
Fuel use:	11.7 gal/hour 44.3 l/hour
Power at rated PTO speed:	212.08 hp 158.1 kW
Fuel use:	11.9 gal/hour 45.0 l/hour
Drawbar performance
Max power:	175.89 hp 131.2 kW
Fuel use:	11.7 gal/hour 44.3 l/hour
Gear 5 used for power test.
Max pull:	28,747 lbs 13039 kg
Gear 1 used for pull test.

FAQ

Is CaseIH 9240 a good tractor?

The CaseIH 9240 is one of the great tractors in the CaseIH stable, and it has earned CaseIH a fantastic reputation.

How much oil does a CaseIH 9240 take?

Check out the CaseIH 9240 oil capacity and oil type in the engine specs section as it may vary across the engines. Keep in mind, that older models might have their oil capacity increased over time. You may compare between the early and late oil capacity.

Do tractors have VIN numbers?

Every tractor has a VIN number. The number is usually engraved below the driver’s seat. Tractor manufacturers put the number in different places on the tractor body.

What was the last year CaseIH made the 9230

The CaseIH 9240 was an agricultural tractor model made from 1990 – 1995