CaseIH 9250 Four-wheel Drive (4WD) tractor Specs & Features

Contents show

CaseIH 9250 Four-wheel Drive (4WD) tractor Technical Specifications

CaseIH 9250 is a Row-Crop tractor that was produced by the John Deere between 1990 – 1995.

Below you will find detailed technical specifications for CaseIH 9250 covering engine types, horsepower ratings, weight, height, fuel type and tank volume, oil capacity and type, hydraulic system diagram, wiring diagram, battery specs, etc.

CaseIH 9250 Production

Manufacturer:
Manufacturer:	CaseIH
Type:	Four-wheel Drive (4WD) tractor
Factory:	Fargo, North Dakota, USA
Original price:	$116,000 (1995)

CaseIH 9250 Power

Engine:
Engine:	300 hp 223.7 kW
PTO (claimed):	266 hp 198.4 kW
Drawbar (tested):	237.29 hp 176.9 kW
PTO (tested):	271.01 hp 202.1 kW

CaseIH 9250 Electrical

Ground:	negative
Battery volts:	12

CaseIH 9250 Mechanical

Chassis:

4×4 articulated 4WD

Steering:

hydrostatic power with articulation and front-axle steering

Brakes:

integrated hydraulic caliper disc

Cab:

Cab standard with air-conditioning. Optional deluxe cab adds side and rear windowwipers plus internal storage compartments.

Transmission:

12-speed full power shift

Capacity

Fuel:	200 gal 757.0 L
Hydraulic system:	18 gal 68.1 L

Hydraulics

Type:	closed center load sensing, pressure compensating
Capacity:	18 gal 68.1 L
Pressure:	2500 psi 172.4 bar
Valves:	4
Total flow:	27 gpm 102.2 lpm

Tracktor Hitch

Optional Rear Type:	III
Control:	optional
Rear lift:	12,750 lbs 5783 kg

Power Take-off (PTO)

Optional Rear PTO:	independent
Rear RPM:	1000
Engine RPM:	1000@2098

CaseIH 9250 Engine detail

Engine Detail
Cummins LTA-10
turbocharged aftercooled diesel
6-cylinder
liquid-cooled
Displacement:	611 ci 10.0 L
Bore/Stroke:	4.921×5.354 inches 125 x 136 mm
Power:	300 hp 223.7 kW
Air cleaner:	dual paper elements
Compression:	16.0:1
Rated RPM:	2100
Torque:	1015 lb-ft 1376.3 Nm
Torque RPM:	1400
Starter volts:	12
Oil capacity:	44 qts 41.6 L
Coolant capacity:	54 qts 51.1 L

CaseIH 9250 Transmission overview

Engine Oil

Type:	full power shift
Gears:	12 forward and 3 reverse
Clutch:	hydraulic wet disc
Full power shift transmission operated with two right-hand levers; one for shifting gears and the other for forward/reverse. Skip-Shift feature allows the transmission to quickly shift from first into higher gears (4th, 6th, 8th).

CaseIH 9250 Dimensions

Wheelbase:	131 inches 332 cm
Length:	272.9 inches 693 cm
Minimum Width:	93.5 inches 237 cm
Duals Width:	144.3 inches 366 cm
Height (exhaust):	143 inches 363 cm
Operating weight:	30,060 lbs 13635 kg (20.8R42 duals)
Front tread:	60 to 130 inches 152 to 330 cm
Rear tread:	60 to 130 inches 152 to 330 cm

CaseIH 9250 Tests

OCED Tractor Test 1651

OCED Tractor Test 1651
Diesel 12-speed 4WD September 19 – 25, 1991 Link: OCED Tractor Test 1651 file
PTO performance
Max power:	271.01 hp 202.1 kW
Fuel use:	14.3 gal/hour 54.1 l/hour
Power at rated engine speed:	266.01 hp 198.4 kW
Fuel use:	14.6 gal/hour 55.3 l/hour
Drawbar performance
Max power:	237.29 hp 176.9 kW
Fuel use:	14.5 gal/hour 54.9 l/hour
Gear 5 used for power test.
Max pull:	32,363 lbs 14679 kg
Gear 1 used for pull test.

FAQ

Is CaseIH 9250 a good tractor?

The CaseIH 9250 is one of the great tractors in the CaseIH stable, and it has earned CaseIH a fantastic reputation.

How much oil does a CaseIH 9250 take?

Check out the CaseIH 9250 oil capacity and oil type in the engine specs section as it may vary across the engines. Keep in mind, that older models might have their oil capacity increased over time. You may compare between the early and late oil capacity.

Do tractors have VIN numbers?

Every tractor has a VIN number. The number is usually engraved below the driver’s seat. Tractor manufacturers put the number in different places on the tractor body.

What was the last year CaseIH made the 9240

The CaseIH 9250 was an agricultural tractor model made from 1990 – 1995