CaseIH C60 Utility tractor Specs & Features

Contents show

CaseIH C60 Utility tractor Technical Specifications

CaseIH C60 is a Row-Crop tractor that was produced by the John Deere between 1998 – 2002.

Below you will find detailed technical specifications for CaseIH C60 covering engine types, horsepower ratings, weight, height, fuel type and tank volume, oil capacity and type, hydraulic system diagram, wiring diagram, battery specs, etc.

CaseIH C60 Production

Manufacturer:
Manufacturer:	CaseIH
Type:	Utility tractor
Factory:	Doncaster, England
Original price:	$22,400 (1999)

CaseIH C60 Power

Engine:
Engine (gross):	64 hp 47.7 kW
Engine (net):	60 hp 44.7 kW
PTO (claimed):	50 hp 37.3 kW
Drawbar (tested):	48.4 hp 36.1 kW
PTO (tested):	56.5 hp 42.1 kW

CaseIH C60 Electrical

Ground:	negative
Charging system:	alternator
Charging amps:	65
Battery CCA:	650
	810 (optional)
Battery volts:	12

CaseIH C60 Mechanical

Chassis:

4×2 2WD

4×4 MFWD 4WD (optional)

Differential lock:

mechanical

Steering:

hydrostatic power

Brakes:

differential hydraulic wet disc

Cab:

Two-post ROPS with straddle platform.

Transmissions:

8-speed

16-speed partial power shift

16-speed creeper

Capacity

Fuel:	20 gal 75.7 L
Hydraulic system:	9 gal 34.1 L (2WD)
	9.7 gal 36.7 L (4WD)

Hydraulics

Type:	open center
Capacity:	9 gal 34.1 L (2WD)
	9.7 gal 36.7 L (4WD)
Pressure:	2500 psi 172.4 bar
Valves:	0 to 3
Pump flow:	12.7 gpm 48.1 lpm
Total flow:	15.7 gpm 59.4 lpm

Tracktor Hitch

Rear Type:	II/I
Control:	mechanical
Rear lift:	3,665 lbs 1662 kg
	5,097 lbs 2311 kg (optional)

Power Take-off (PTO)

Rear PTO:	independent
Clutch:	hydraulic wet disc
Rear RPM:	540
	540/1000 (optional dual shaft)

CaseIH C60 Engine detail

Engine Detail
Perkins 903.27T
turbocharged diesel
3-cylinder
liquid-cooled
Displacement:	165 ci 2.7 L
Bore/Stroke:	3.74×5.00 inches 95 x 127 mm
Power (gross):	64 hp 47.7 kW
Fuel system:	mechanical direct injection with 5-hole injectors
Air cleaner:	dual paper elements
Compression:	17.25:1
Rated RPM:	2250
Torque:	180 lb-ft 244.1 Nm
Torque RPM:	1400
Starter volts:	12
Oil capacity:	8 qts 7.6 L
Oil change:	250 h
Coolant capacity:	12.57 qts 11.9 L

CaseIH C60 Transmission overview

Engine Oil

Gears:	8 forward and 4 reverse
Clutch:	12-inch dry disc
Oil capacity:	36 qts 34.1 L (2WD)
	38.6 qts 36.5 L (4WD)

CaseIH C60 Dimensions

Wheelbase:	80.9 inches 205 cm (2WD)
	83.3 inches 211 cm (4WD)

CaseIH C60 Weight
Shipping:	5,357 lbs 2429 kg (2WD)
	6,096 lbs 2765 kg (4WD)
Operating:	7,605 lbs 3449 kg
Max capacity:	10,150 lbs 4604 kg

CaseIH C60 Tests

OCED Tractor Test 1894

OCED Tractor Test 1894
Diesel 16-speed 4WD April 1999 – August 1999, Link: OCED Tractor Test 1894 file
PTO performance
Max power:	56.5 hp 42.1 kW
Fuel use:	3.4 gal/hour 12.9 l/hour
Power at rated engine speed:	56.2 hp 41.9 kW
Fuel use:	3.4 gal/hour 12.9 l/hour
Power at rated PTO speed:	55.0 hp 41.0 kW
Fuel use:	3.2 gal/hour 12.1 l/hour
Drawbar performance
Max power:	48.4 hp 36.1 kW
Fuel use:	3.4 gal/hour 12.9 l/hour
Gear 1_high-TA used for power test.
Max pull:	9,160 lbs 4154 kg
Gear 1-Low-Direct used for pull test.

FAQ

Is CaseIH C60 a good tractor?

The CaseIH C60 is one of the great tractors in the CaseIH stable, and it has earned CaseIH a fantastic reputation.

How much oil does a CaseIH C60 take?

Check out the CaseIH C60 oil capacity and oil type in the engine specs section as it may vary across the engines. Keep in mind, that older models might have their oil capacity increased over time. You may compare between the early and late oil capacity.

Do tractors have VIN numbers?

Every tractor has a VIN number. The number is usually engraved below the driver’s seat. Tractor manufacturers put the number in different places on the tractor body.

What was the last year CaseIH made the C50

The CaseIH C60 was an agricultural tractor model made from 1998 – 2002