CaseIH Puma 130 Row-Crop tractor Specs & Features

Contents show

CaseIH Puma 130 Row-Crop tractor Technical Specifications

CaseIH Puma 130 is a Row-Crop tractor that was produced by the John Deere between 2011 – 2013.

Below you will find detailed technical specifications for CaseIH Puma 130 covering engine types, horsepower ratings, weight, height, fuel type and tank volume, oil capacity and type, hydraulic system diagram, wiring diagram, battery specs, etc.

CaseIH Puma 130 Production

Manufacturer:
Manufacturer:	CaseIH
Type:	Row-Crop tractor

CaseIH Puma 130 Power

Engine:
Engine (gross):	131 hp 97.7 kW
Engine (max):	171 hp 127.5 kW
PTO (claimed):	105 hp 78.3 kW
Drawbar (tested):	98.4 hp 73.4 kW
PTO (tested):	134.6 hp 100.4 kW

CaseIH Puma 130 Electrical

Ground:	negative
Charging system:	alternator
Charging amps:	150
	200*Optional
Batteries:	2
Battery CCA:	650
Battery volts:	12

CaseIH Puma 130 Mechanical

Chassis:

4×4 MFWD 4WD

Cab:

Cab standard. Optional cab suspension.

Transmissions:

18-speed full power shift

19-speed full power shift

continuously variable transmission (CVT)

Capacity

Fuel:	71 gal 268.7 L
	86 gal 325.5 L (optional)
Exhaust fluid (DEF):	12.7 gal 48.1 L
Hydraulic system:	19.5 gal 73.8 L

Hydraulics

Type:	closed center pressure flow compensating (PFC)
Capacity:	19.5 gal 73.8 L
Rear valves:	3 to 4 (mechanical)
	3 to 5 (electronic)
Pump flow:	29 gpm 109.8 lpm
	32 gpm 121.1 lpm (optional)

Tracktor Hitch

Rear Type:	2/3N
Rear lift:	7,900 lbs 3583 kg
	9,200 lbs 4173 kg (optional)

Power Take-off (PTO)

Rear PTO:	independent
Rear RPM:	540/1000 (1.375)

CaseIH Puma 130 Engine detail

Engine Detail
FPT
turbocharged diesel
6-cylinder
liquid-cooled
Displacement:	410.6 ci 6.7 L
Bore/Stroke:	4.094×5.197 inches 104 x 132 mm
Emissions:	Interim Tier 4
Emission control:	selective catalytic reduction (SCR)
Rated Power (ECE R120):	131 hp 97.7 kW
Maximum Power (ECE R120):	171 hp 127.5 kW
Rated RPM:	2200
Starter:	electric
Starter volts:	12
Oil capacity:	16 qts 15.1 L

CaseIH Puma 130 Transmission overview

Engine Oil

Type:	full power shift
Gears:	18 forward and 6 reverse
Clutch:	electro-hydraulic wet disc

CaseIH Puma 130 Dimensions

Wheelbase:	107.6 inches 273 cm
	109.8 inches 278 cm (suspended front axle)
Operating weight:	13600 lbs 6168 kg
Rear axle:	Flange
Rear axle:	Bar: 3.625 by 98 inches 92 by 2489 mm
Rear axle:	Bar: 3.625 by 112 inches 92 by 2844 mm
Front tread:	61.4 to 88.8 inches 155 to 225 cm

CaseIH Puma 130 Tests

OCED Tractor Test 2644

OCED Tractor Test 2644
Diesel 18-speed 4WD April 2011 – June 2011, Link: OCED Tractor Test 2644 file
PTO performance
Max power:	134.6 hp 100.4 kW
Fuel use:	7.2 gal/hour 27.3 l/hour
Power at rated engine speed:	124.0 hp 92.5 kW
Fuel use:	7.1 gal/hour 26.9 l/hour
Power at rated PTO speed:	132.1 hp 98.5 kW
Fuel use:	7.2 gal/hour 27.3 l/hour
Drawbar performance
Max power:	98.4 hp 73.4 kW
Fuel use:	7.0 gal/hour 26.5 l/hour
Gear 10 used for power test.
Max pull:	12230 lbs 5547 kg
Gear 8 used for pull test.

FAQ

Is CaseIH Puma 130 a good tractor?

The CaseIH Puma 130 is one of the great tractors in the CaseIH stable, and it has earned CaseIH a fantastic reputation.

How much oil does a CaseIH Puma 130 take?

Check out the CaseIH Puma 130 oil capacity and oil type in the engine specs section as it may vary across the engines. Keep in mind, that older models might have their oil capacity increased over time. You may compare between the early and late oil capacity.

Do tractors have VIN numbers?

Every tractor has a VIN number. The number is usually engraved below the driver’s seat. Tractor manufacturers put the number in different places on the tractor body.

What was the last year CaseIH made the Puma 130?

The CaseIH Puma 130 was an agricultural tractor model made from 2011 – 2013