Caterpillar Twenty-Two Technical Specifications
Caterpillar Twenty-Two is a Row-Crop tractor that was produced by the John Deere between 1934 – 1939.
Below you will find detailed technical specifications for Caterpillar Twenty-Two covering engine types, horsepower ratings, weight, height, fuel type and tank volume, oil capacity and type, hydraulic system diagram, wiring diagram, battery specs, etc.
Caterpillar Twenty-Two Production
| Manufacturer: | |
| Manufacturer | Caterpillar |
| Agricultural Crawler tractor | |
| Built in Peoria, Illinois, USA | |
| Engine: | 25.26 hp 18.8 kW |
| Belt (tested) | 30.71 hp 22.9 kW |
Caterpillar Twenty-Two Mechanical
| Drive | crawler |
| Steering | manual clutches |
| Open operator station. | |
Caterpillar Twenty-Two Engine detail
| Engine Detail | |
| Caterpillar | |
| gasoline | |
| 4-cylinder | |
| liquid-cooled | |
| Displacement | 251 ci 4.1 L |
| Bore/Stroke | 4.00×5.00 inches 102 x 127 mm |
| Fuel system | Zenith K5A carburetor |
| Rated RPM | 1250 |
| Oil capacity | 10 qts 9.5 L |
| Coolant capacity | 20 qts 18.9 L |
| Engine Oil | |||
| Type | gear |
| Gears | 3 forward and 1 reverse |
| Clutch | dry disc |
| Oil capacity | 8 qts 7.6 L |
Caterpillar Twenty-Two Dimensions
| Length | 108 inches 274 cm |
| Width | 57.75 inches (40″ gauge) 146 cm |
| 67.75 inches (50″ gauge) 172 cm | |
| Height (hood) | 56.125 inches 142 cm |
| Shipping weight | 6,200 lbs (40″ gauge) 2812 kg |
| 6,270 lbs (50″ gauge) 2844 kg | |
| Ground clearance | 9 inches 22 cm |
| Clearance (drawbar) | 10.5 inches 26 cm |
| Gauge | 40 inches 101 cm |
| Gauge | 50 inches 127 cm |
Caterpillar Twenty-Two Tests
| Nebraska Tractor Test 226 | |
| Distillate 3-speed crawler September 25 – October 9, 1934 Link: Nebraska Tractor Test 226 file | |
| Belt power (max) | 29.36 hp 21.9 kW |
| Belt fuel use (max) | 3.0 gal/hour 11.4 l/hour |
| Drawbar performance | |
| Max power | 23.43 hp 17.5 kW |
| Gear 1 used for power test. | |
| Max pull | 4,534 lbs 2056 kg |
| Gear 1 used for pull test. | |
| Nebraska Tractor Test 228 | |||
| Nebraska Tractor Test 228 | |
| Gasoline 3-speed crawler October 17 – 30, 1934 Link: Nebraska Tractor Test 228 file | |
| Belt power (max) | 30.71 hp 22.9 kW |
| Belt fuel use (max) | 3.3 gal/hour 12.5 l/hour |
| Drawbar performance | |
| Max power | 25.26 hp 18.8 kW |
| Gear 1 used for power test. | |
| Max pull | 4,900 lbs 2222 kg |
| Gear 1 used for pull test. | |
FAQ
Is Caterpillar Twenty-Two a good tractor?
The Caterpillar Twenty-Two is one of the great tractors in the Caterpillar stable, and it has earned Caterpillar a fantastic reputation.
How much oil does a Caterpillar Twenty-Two take?
Check out the Caterpillar Twenty-Two oil capacity and oil type in the engine specs section as it may vary across the engines. Keep in mind, that older models might have their oil capacity increased over time. You may compare between the early and late oil capacity.
Do tractors have VIN numbers?
Every tractor has a VIN number. The number is usually engraved below the driver’s seat. Tractor manufacturers put the number in different places on the tractor body.
What was the last year Caterpillar made the ?
The Caterpillar Twenty-Two was an agricultural tractor model made from 1934 – 1939
How much does a Caterpillar Twenty-Two tractor weight?
Depending on the engine type, the Caterpillar Twenty-Two weight ranges from 6200 to 6270 pounds .
How much can a Caterpillar Twenty-Two Pull?
The max pulling capacity of the Caterpillar Twenty-Two tractors starts at 4,534 lbs
2056 kg but may be slightly higher depending on the trim.