International Harvester Cub Technical Specifications
International Harvester Cub is a Row-Crop tractor that was produced by the John Deere between 1964 – 1979.
Below you will find detailed technical specifications for International Harvester Cub covering engine types, horsepower ratings, weight, height, fuel type and tank volume, oil capacity and type, hydraulic system diagram, wiring diagram, battery specs, etc.
International Harvester Cub Production
Manufacturer: | |
Manufacturer | International Harvester |
Built in Louisville, Kentucky, USA | |
The International Cub`s PTO ran counter-clockwise (“backwards”) and at full engine speed, making it incompatible with standard PTO-driven equipment. In 1975 the “Increased Power” New International Cub was released. |
Engine: | |
Engine | 13 hp 9.7 kW |
Drawbar (claimed) | 10 hp 7.5 kW |
PTO (claimed) | 11 hp 8.2 kW |
Plows | 1 (12 inch) |
Mechanical | |
Two-wheel drive | |
Steering | manual |
Differential mechanical drum brakes | |
Open operator station. |
International Harvester Cub photos… |
Capacity | |
Fuel | 7.5 gal 28.4 L |
Hydraulic system | 0.56 gal 2.1 L |
Hydraulics | |
Capacity | 0.56 gal 2.1 L |
Pressure | 1200 psi 82.7 bar |
Total flow | 2.8 gpm 10.6 lpm |
Tractor hitch | |
Type | IH Fast Hitch (optional) |
Power Take-off (PTO) | |
Rear PTO | independent |
Rear RPM | 1800 (counter-clockwise) |
Dimensions & Tires | |
Wheelbase | 69.25 inches 175 cm |
Weight | 1477 to 1877 pounds |
Front tire | 4.00-12 |
Rear tire | 8-24 |
Cub Serial Numbers | |
1964 | 224704 |
1965 | 225110 |
1966 | 227209 |
1967 | 229225 |
1968 | 231005 |
1969 | 232981 |
1970 | 234868 |
1971 | 236827 |
1972 | 238506 |
1973 | 240581 |
1974 | 242746 |
1975 | 245651 |
Final | 248124 |
1975 | 248125 |
1976 | 248618 |
1977 | 250832 |
1978 | 252109 |
1979 | 253136 |
Final | 253685 |
International Harvester Cub Electrical
Ground | negative |
Charging system | generator |
alternator (sn 248125) | |
Battery volts | 12 |
International Harvester Cub Mechanical
Two-wheel drive | |
Steering | manual |
Differential mechanical drum brakes | |
Open operator station. |
Capacity
Fuel | 7.5 gal 28.4 L |
Hydraulic system | 0.56 gal 2.1 L |
Hydraulics
Capacity | 0.56 gal 2.1 L |
Pressure | 1200 psi 82.7 bar |
Total flow | 2.8 gpm 10.6 lpm |
Tracktor Hitch
Type | IH Fast Hitch (optional) |
Power Take-off (PTO)
Rear PTO | independent |
Rear RPM | 1800 (counter-clockwise) |
International Harvester Cub Engine detail
Engine Detail | |
International Harvester C60 | |
gasoline | |
4-cylinder | |
liquid-cooled | |
Displacement: | 59.5 ci 1.0 L |
Bore/Stroke: | 2.625×2.75 inches 67 x 70 mm |
Fuel system: | International 0.75 updraft carburetor |
Compression: | 7.5:1 |
Rated RPM: | 2200 |
Firing order: | 1-3-4-2 |
Starter volts: | 12 |
Oil capacity: | 3 qts 2.8 L |
Coolant capacity: | 9.75 qts 9.2 L |
Sparkplug gap: | 0.023 inches 0.584 mm |
Engine Oil |
Type: | unsynchronized gear |
Gears: | 3 forward and 1 reverse |
Clutch: | mechanical dry disc |
Oil capacity: | 7 qts 6.6 L |
International Harvester Cub Dimensions
Wheelbase: | 64 inches 162 cm |
Length: | 94 inches 238 cm |
Width: | 52 inches 132 cm |
Height: | 49 inches 124 cm |
Weight: | 1480 lbs 671 kg |
Ground clearance: | 13 inches 33 cm |
Front tread: | 42 inches 106 cm |
Rear tread: | 42 inches 106 cm |
FAQ
Is International Harvester Cub a good tractor?
The International Harvester Cub is one of the great tractors in the International Harvester stable, and it has earned International Harvester a fantastic reputation.
How much oil does a International Harvester Cub take?
Check out the International Harvester Cub oil capacity and oil type in the engine specs section as it may vary across the engines. Keep in mind, that older models might have their oil capacity increased over time. You may compare between the early and late oil capacity.
Do tractors have VIN numbers?
Every tractor has a VIN number. The number is usually engraved below the driver’s seat. Tractor manufacturers put the number in different places on the tractor body.
What was the last year International Harvester made the ?
The International Harvester Cub was an agricultural tractor model made from 1964 – 1979
How much does a International Harvester Cub tractor weight?
Depending on the engine type, the International Harvester Cub weight ranges from 1477 to 1877 pounds .
How much can a International Harvester Cub Pull?
The max pulling capacity of the International Harvester Cub tractors starts at 22,798 lbs
10341 kg but may be slightly higher depending on the trim.