Massey Ferguson 7619 Row-Crop tractor Specs & Features

Contents show

Massey Ferguson 7619 Row-Crop tractor Technical Specifications

Massey Ferguson 7619 is a Row-Crop tractor that was produced by the John Deere between 2013 – 2014.

Below you will find detailed technical specifications for Massey Ferguson 7619 covering engine types, horsepower ratings, weight, height, fuel type and tank volume, oil capacity and type, hydraulic system diagram, wiring diagram, battery specs, etc.

Massey Ferguson 7619 Production

Manufacturer:
Manufacturer:	Massey Ferguson (a part of AGCO)
Type:	Row-Crop tractor
Factory:	Beauvais, France

Massey Ferguson 7619 Power

Engine:
Engine (net):	170 hp 126.8 kW
PTO (claimed):	140 hp 104.4 kW
Drawbar (tested):	115.2 hp 85.9 kW
PTO (tested):	173.3 hp 129.2 kW

Massey Ferguson 7619 Electrical

Ground:	negative
Charging system:	alternator
Charging amps:	120
	175 (option)
	240 (dual 120 option)
Batteries:	2
Battery volts:	12

Massey Ferguson 7619 Mechanical

Chassis:

4×4 MFWD 4WD

Final drives:

inboard planetary

Differential lock:

electro-hydraulic standard

Steering:

hydrostatic power

Brakes:

hydraulic wet disc

Trailer brakes:

hydraulic (optional)

pneumatic (optional)

Cab:

Cab standard. Optional hydraulic OptiRide cab suspension. AGCOCOMMAND (optional)

Auto-Guide 3000 (optional)

Transmission:

24-speed six-speed power shift

Capacity

Fuel:	114 gal 431.5 L
Exhaust fluid (DEF):	14 gal 53.0 L
Hydraulic system:	26.4 gal 99.9 L

Hydraulics

Type:	closed-center load sensing (CCLS)
Capacity:	26.4 gal 99.9 L
Pressure:	2900 psi 200.0 bar
Valves:	3 (mechanical)
	4 (2 mech, 2 elec)
	4 (electric)
SCV flow:	24.3 gpm 92.0 lpm
Total flow:	29 gpm 109.8 lpm
	39 gpm 147.6 lpm *Optional

Tracktor Hitch

Control:	electronic lower link draft sensing
Rear lift (at ends):	14000 lbs 6350 kg (Dyna-6)
	13715 lbs 6221 kg (Dyna-VT)
Front Hitch:	optional
Drawbar:	Cat. II with drop pin

Power Take-off (PTO)

Rear PTO:	independent
Clutch:	electro-hydraulic
Rear RPM:	540/1000 (1.375)
	540/540E/1000 (1.375)
	540/1000/1000E (1.375)
	540/540E/1000/1000E (1.375)
Engine RPM:	540@1890 (Dyna-6) 540@2065 (Dyna-VT) 540E@1524 (Dyna-6) 540E@1590 (Dyna-VT) 1000@2000 (Dyna-6) 1000@2034 (Dyna-VT) 1000E@1595

Massey Ferguson 7619 Engine detail

Engine Detail
Sisu
turbocharged air-to-air aftercooled diesel
6-cylinder 24-valve
liquid-cooled
Displacement:	402.5 ci 6.6 L
Bore/Stroke:	4.252×4.724 inches 108 x 120 mm
Emissions:	Interim Tier IV
Emission control:	selective catalytic reduction (SCR)
Fuel system:	electronic high-pressure common rail
Pre-heating:	thermostart
Compression:	17.4:1
Rated RPM:	2100
Starter:	electric
Starter volts:	12

Massey Ferguson 7619 Transmission overview

Engine Oil

Transmission:	Dyna-6
Type:	six-speed power shift
Gears:	24 forward and reverse
Six power shift gears in four ranges.

Massey Ferguson 7619 Dimensions

Wheelbase:	117.8 inches 299 cm
Length:	203.6 inches 517 cm
Height (cab):	120.7 inches 306 cm
	124 inches 314 cm (AutoGuide)
Front axle:	4WD
Front axle:	QuadLink Suspended 4WD
Rear axle:	Bar: 84.41 inch length 2144 mm (
Rear axle:	Bar: 89.65 inch length 2277 mm (
Rear axle:	Long bar: 112.1 inch length 2847 mm (
Rear axle:	Long bar: 113 inch length 2870 mm (

Massey Ferguson 7619 Weight
Shipping:	15800 lbs 7166 kg
Max capacity:	26445 lbs 11995 kg (Dyna-6)
	27558 lbs 12500 kg (Dyna-VT)
Max Drawbar:	3527 lbs 1599 kg

Massey Ferguson 7619 Tests

OCED Tractor Test 2703

OCED Tractor Test 2703
Diesel Dyna-VT 4WD January 2012 – March 2012, Link: OCED Tractor Test 2703 file
PTO performance
Max power:	173.3 hp 129.2 kW
Fuel use:	9.4 gal/hour 35.6 l/hour
Power at rated engine speed:	151.5 hp 113.0 kW
Fuel use:	8.8 gal/hour 33.3 l/hour
Power at rated PTO speed:	161.6 hp 120.5 kW
Fuel use:	9.1 gal/hour 34.4 l/hour
Drawbar performance
Max power:	115.2 hp 85.9 kW
Fuel use:	8.1 gal/hour 30.7 l/hour
Max pull:	16860 lbs 7647 kg

FAQ

Is Massey Ferguson 7619 a good tractor?

The Massey Ferguson 7619 is one of the great tractors in the Massey Ferguson (a part of AGCO) stable, and it has earned Massey Ferguson (a part of AGCO) a fantastic reputation.

How much oil does a Massey Ferguson 7619 take?

Check out the Massey Ferguson 7619 oil capacity and oil type in the engine specs section as it may vary across the engines. Keep in mind, that older models might have their oil capacity increased over time. You may compare between the early and late oil capacity.

Do tractors have VIN numbers?

Every tractor has a VIN number. The number is usually engraved below the driver’s seat. Tractor manufacturers put the number in different places on the tractor body.

What was the last year Massey Ferguson (a part of AGCO) made the 7618

The Massey Ferguson 7619 was an agricultural tractor model made from 2013 – 2014