New Holland Workmaster 75 Utility tractor Specs & Features

Contents show

New Holland Workmaster 75 Utility tractor Technical Specifications

New Holland Workmaster 75 is a Row-Crop tractor that was produced by the John Deere between 2010 – 2014.

Below you will find detailed technical specifications for New Holland Workmaster 75 covering engine types, horsepower ratings, weight, height, fuel type and tank volume, oil capacity and type, hydraulic system diagram, wiring diagram, battery specs, etc.

New Holland Workmaster 75 Production

Manufacturer:
Manufacturer:	New Holland
Type:	Utility tractor
Factory:	India

New Holland Workmaster 75 Power

Engine:
Engine (gross):	75 hp 55.9 kW
PTO (claimed):	65 hp 48.5 kW
PTO (tested):	68.18 hp 50.8 kW

New Holland Workmaster 75 Electrical

Ground:	negative
Charging system:	alternator
Charging amps:	65
Charging volts:	12
Battery CCA:	800
Battery volts:	12

New Holland Workmaster 75 Mechanical

Chassis:

4×4 MFWD 4WD

Differential lock:

mechanical rear lock engaged by foot pedal, limited slip front differential (4WD)

Steering:

hydrostatic power

Brakes:

differential mechanical wet disc

Cab:

Two-post foldable ROPS

Transmission:

8-speed partially synchronized

Hydraulics

Type:	open center fixed displacement
Rear valves:	1 or 2
Mid valves:	2 (loader)
Pump flow:	10.4 gpm 39.4 lpm
Total flow:	18.7 gpm 70.8 lpm
Steering flow:	8.3 gpm 31.4 lpm

Tracktor Hitch

Rear Type:	2/1
Control:	position control and mechanical draft sensing
Rear lift (at ends):	3,276 lbs 1485 kg

Power Take-off (PTO)

Rear PTO:	independent
Rear RPM:	540

New Holland Workmaster 75 Engine detail

Engine Detail
FPT
turbocharged diesel
4-cylinder
liquid-cooled
Displacement:	195 ci 3.2 L
Bore/Stroke:	3.898×4.094 inches 99 x 104 mm
Emissions:	Tier III
Power (gross):	75 hp 55.9 kW
Air cleaner:	dual dry element
Compression:	17:1
Rated RPM:	2500
Starter:	electric
Starter volts:	12

New Holland Workmaster 75 Transmission overview

Engine Oil

Type:	partially synchronized
Gears:	8 forward and 2 reverse
Clutch:	11-inch dry organic plate
Four gears in two ranges. Gear shifts 3-4 and 7-8 are synchronized.

New Holland Workmaster 75 Dimensions

Length:	137.2 inches 348 cm
Width:	78.4 inches 199 cm
Height:	95.3 inches 242 cm
4WD Front tread:	59.6 to 79.6 inches 151 to 202 cm
Rear tread:	59.7 to 80.2 inches 151 to 203 cm

New Holland Workmaster 75 Weight
2WD Shipping:	5,059 lbs 2294 kg
4WD Shipping:	5,688 lbs 2580 kg
4WD Operating:	5,790 lbs 2626 kg

New Holland Workmaster 75 Tests

Nebraska Tractor Test 2014

Nebraska Tractor Test 2014
Diesel 8-speed 4WD December 7 – 9, 2011 Link: Nebraska Tractor Test 2014 file
PTO performance
Max power:	68.18 hp 50.8 kW
Fuel use:	4.3 gal/hour 16.3 l/hour
Power at rated engine speed:	66.89 hp 49.9 kW
Fuel use:	4.7 gal/hour 17.8 l/hour
Power at rated PTO speed:	66.69 hp 49.7 kW
Fuel use:	4.0 gal/hour 15.1 l/hour

FAQ

Is New Holland Workmaster 75 a good tractor?

The New Holland Workmaster 75 is one of the great tractors in the New Holland stable, and it has earned New Holland a fantastic reputation.

How much oil does a New Holland Workmaster 75 take?

Check out the New Holland Workmaster 75 oil capacity and oil type in the engine specs section as it may vary across the engines. Keep in mind, that older models might have their oil capacity increased over time. You may compare between the early and late oil capacity.

Do tractors have VIN numbers?

Every tractor has a VIN number. The number is usually engraved below the driver’s seat. Tractor manufacturers put the number in different places on the tractor body.

What was the last year New Holland made the Workmaster 65

The New Holland Workmaster 75 was an agricultural tractor model made from 2010 – 2014