Oliver 1955 Row-Crop tractor Specs & Features

Contents show

Oliver 1955 Row-Crop tractor Technical Specifications

Oliver 1955 is a Row-Crop tractor that was produced by the John Deere between 1970 – 1974.

Below you will find detailed technical specifications for Oliver 1955 covering engine types, horsepower ratings, weight, height, fuel type and tank volume, oil capacity and type, hydraulic system diagram, wiring diagram, battery specs, etc.

Oliver 1955 Production

Manufacturer:
Manufacturer:	Oliver (a part of White)
Type:	Row-Crop tractor
Original price:	$14,250 (1974 )

Oliver 1955 Power

Engine:
PTO (claimed):	108 hp 80.5 kW
Drawbar (tested):	90.32 hp 67.4 kW
PTO (tested):	108.16 hp 80.7 kW

Oliver 1955 Electrical

Ground:	negative
Battery volts:	12

Oliver 1955 Mechanical

Chassis:

4×2 2WD

4×4 MFWD 4WD

Steering:

power

Brakes:

differential hydraulic dry disc

Cab:

Open operator station. Optional two-post ROPS and cab.

Transmissions:

6-speed gear

18-speed partial power shift

Hydraulics

Type:	closed center
Pump flow:	20 gpm 75.7 lpm

Tracktor Hitch

Rear Type:	II/III
Rear lift:	6000 lbs 2721 kg

Power Take-off (PTO)

Rear PTO:	independent
Rear RPM:	1000

Oliver 1955 Engine detail

Engine Detail
Oliver-Waukesha
turbocharged diesel
6-cylinder
liquid-cooled
Displacement:	310 ci 5.1 L
Bore/Stroke:	3.875×4.375 inches 98 x 111 mm
Air cleaner:	dry
Rated RPM:	2400
Starter volts:	12
Coolant capacity:	20 qts 18.9 L

Oliver 1955 Transmission overview

Engine Oil

Type:	gear
Gears:	6 forward and 2 reverse
Clutch:	330mm cerametallic disc

Oliver 1955 Dimensions

2WD Wheelbase:	103 inches 261 cm
4WD Wheelbase:	86.25 inches 219 cm
2WD Length:	159.5 inches 405 cm
4WD Length:	152.375 inches 387 cm
Width:	80.625 inches 204 cm *Minimum width
Height (steering wheel):	85.5 inches 217 cm
Operating weight:	11,250 lbs 5103 kg
Ballasted weight:	16,220 lbs 7357 kg
2WD Ground clearance:	25.5 inches 64 cm
4WD Ground clearance:	13.5 inches 34 cm
2WD Front tread:	61.5 to 87.5 inches 156 to 222 cm
4WD Front tread:	60/70.75/80 inches 152/179/203 cm
Rear tread:	57 to 119.5 inches 144 to 303 cm

Oliver 1955 Tests

Nebraska Tractor Test 1055

Nebraska Tractor Test 1055
Diesel 18-speed 2WD October 15 – 24, 1970 Link: Nebraska Tractor Test 1055 file
PTO performance
Power at rated engine speed:	108.16 hp 80.7 kW
Fuel use:	6.9 gal/hour 26.1 l/hour
Drawbar performance
Max power:	90.32 hp 67.4 kW
Fuel use:	7.0 gal/hour 26.5 l/hour
Gear 3-direct used for power test.
Max pull:	12,639 lbs 5733 kg
Gear 2-under used for pull test.

FAQ

Is Oliver 1955 a good tractor?

The Oliver 1955 is one of the great tractors in the Oliver (a part of White) stable, and it has earned Oliver (a part of White) a fantastic reputation.

How much oil does a Oliver 1955 take?

Check out the Oliver 1955 oil capacity and oil type in the engine specs section as it may vary across the engines. Keep in mind, that older models might have their oil capacity increased over time. You may compare between the early and late oil capacity.

Do tractors have VIN numbers?

Every tractor has a VIN number. The number is usually engraved below the driver’s seat. Tractor manufacturers put the number in different places on the tractor body.

What was the last year Oliver (a part of White) made the 1855

The Oliver 1955 was an agricultural tractor model made from 1970 – 1974