Challenger MT275B Compact Utility tractor Technical Specifications
Challenger MT275B is a Row-Crop tractor that was produced by the John Deere between 2005 – 2008.
Below you will find detailed technical specifications for Challenger MT275B covering engine types, horsepower ratings, weight, height, fuel type and tank volume, oil capacity and type, hydraulic system diagram, wiring diagram, battery specs, etc.
Challenger MT275B Production
Manufacturer: |
Distributor: |
Challenger (a part of AGCO)
|
Manufacturer: |
Iseki
|
Type: |
Compact Utility tractor
|
Factory: |
Matsuyama, Japan
|
Challenger MT275B Electrical
Ground: |
negative
|
Charging system: |
alternator
|
Charging amps: |
40
|
Battery CCA: |
630
|
Battery volts: |
12
|
Challenger MT275B Mechanical
Chassis: |
4×4 MFWD 4WD
|
Final drives: |
spur gear
|
Differential lock: |
mechanical rear
|
Steering: |
power
|
Brakes: |
wet disc
|
Cab: |
Two-post foldable ROPS
|
Transmissions: |
hydrostatic
|
|
8-speed
|
|
12-speed partially synchronized with power shuttle
|
Capacity
Fuel: |
10.6 gal 40.1 L
|
Hydraulic system: |
8.2 gal 31.0 L
|
Hydraulics
Type: |
open center
|
Capacity: |
8.2 gal 31.0 L
|
Pressure: |
2276 psi 156.9 bar
|
Rear valves: |
2*Optional
|
Mid valves: |
2*Optional
|
Pump flow: |
8.3 gpm 31.4 lpm
|
Total flow: |
12.7 gpm 48.1 lpm (sync shuttle)
|
|
13.7 gpm 51.9 lpm (power shuttle/hydro)
|
Steering flow: |
4.4 gpm 16.7 lpm (sync shuttle)
|
|
5.4 gpm 20.4 lpm (power shuttle/hydro)
|
Steering press.: |
2276 psi 156.9 bar
|
Tracktor Hitch
Rear Type: |
I
|
Control: |
position and response control
|
|
optional top-link draft control
|
Rear lift (at ends): |
2800 lbs 1270 kg
|
Rear lift (at 24″/610mm): |
2535 lbs 1149 kg
|
Rear Arms: |
fixed link ends ((sync shuttle)
|
|
telescopic link ends (power shuttle/hydro)
|
Power Take-off (PTO)
Rear PTO: |
independent
|
Clutch: |
electro-hydraulic wet disc
|
Rear RPM: |
540 (1.375)
|
Mid PTO: |
independent*Optional
|
Mid RPM: |
2000 (1.00)
|
Challenger MT275B Engine detail
Engine Detail |
Iseki E3CD-VTB10 |
turbocharged diesel |
3-cylinder |
liquid-cooled |
Displacement: |
91.4 ci 1.5 L
|
Bore/Stroke: |
3.43×3.30 inches 87 x 84 mm
|
Power (gross): |
40.1 hp 29.9 kW
|
Fuel system: |
indirect injection
|
Air cleaner: |
dual-stage dry
|
Pre-heating: |
glow plugs
|
Compression: |
21.7:1
|
Rated RPM: |
2600
|
Idle RPM: |
980-2860
|
Starter volts: |
12
|
Oil capacity: |
5 qts 4.7 L
|
Coolant capacity: |
7.1 qts 6.7 L
|
Engine Oil |
Challenger MT275B Transmission overview
Type: |
hydrostatic
|
Gears: |
infinite (3-range) forward and reverse
|
Oil capacity: |
32.8 qts 31.0 L
|
Challenger MT275B Dimensions
Wheelbase: |
69.7 inches 177 cm
|
Length: |
121 inches 307 cm
|
Width: |
62.2 inches 157 cm *Minimum width
|
Height (ROPS): |
87.4 inches 221 cm
|
Ground clearance: |
14.1 inches 35 cm
|
Front axle: |
Flange: 48.8 inch length 1239 mm
|
Rear axle: |
Flange: 44.6 inch length 1132 mm
|
Front tread: |
45 inches 114 cm
|
Challenger MT275B Weight |
|
3169 lbs 1437 kg
|
Max capacity: |
6614 lbs 3000 kg
|
Max front axle: |
3968 lbs 1799 kg
|
Max rear axle: |
3968 lbs 1799 kg
|
FAQ
Is Challenger MT275B a good tractor?
The Challenger MT275B is one of the great tractors in the Iseki stable, and it has earned Iseki a fantastic reputation.
How much oil does a Challenger MT275B take?
Check out the Challenger MT275B oil capacity and oil type in the engine specs section as it may vary across the engines. Keep in mind, that older models might have their oil capacity increased over time. You may compare between the early and late oil capacity.
Do tractors have VIN numbers?
Every tractor has a VIN number. The number is usually engraved below the driver’s seat. Tractor manufacturers put the number in different places on the tractor body.
What was the last year Iseki made the MT265B
The Challenger MT275B was an agricultural tractor model made from 2005 – 2008
|