International Harvester B-634 Technical Specifications
International Harvester B-634 is a Row-Crop tractor that was produced by the John Deere between 1964 – 1976.
Below you will find detailed technical specifications for International Harvester B-634 covering engine types, horsepower ratings, weight, height, fuel type and tank volume, oil capacity and type, hydraulic system diagram, wiring diagram, battery specs, etc.
International Harvester B-634 Production
Manufacturer: |
Manufacturer: |
International Harvester
|
Factory: |
Doncaster, England
|
Total built: |
3,848
|
International Harvester B-634 Electrical
Charging system: |
generator
|
Battery volts: |
12
|
Battery AH: |
95
|
International Harvester B-634 Mechanical
Chassis: |
4×2 2WD
|
|
4×4 4WD*Four-wheel drive conversion by County
|
2WD Steering: |
manual
|
4WD Steering: |
power
|
Brakes: |
mechanical disc
|
Cab: |
Open operator station. Cab optional.
|
Transmission: |
8-speed
|
Hydraulics
Pressure: |
2500 psi 172.4 bar
|
Pump flow: |
10.4 gpm 39.4 lpm
|
Steering flow: |
4.8 gpm 18.2 lpm
|
Steering press.: |
1500 psi 103.4 bar
|
Tracktor Hitch
Rear Type: |
II
|
Control: |
position and draft control
|
Rear lift: |
3360 lbs 1524 kg
|
Power Take-off (PTO)
Rear PTO: |
independent
|
Rear RPM: |
540 (1.375)
|
Engine RPM: |
540@1458
|
International Harvester B-634 Engine detail
Engine Detail |
International Harvester BD-281 |
diesel |
4-cylinder |
liquid-cooled |
Displacement: |
281 ci 4.6 L
|
Bore/Stroke: |
4.125×5.25 inches 105 x 133 mm
|
Power: |
66 hp 49.2 kW
|
Rated RPM: |
1600
|
Torque: |
225 lb-ft 305.1 Nm
|
Torque RPM: |
1000
|
Starter volts: |
12
|
Engine Oil |
International Harvester B-634 Transmission overview
Gears: |
8 forward and 2 reverse
|
Clutch: |
330mm dry disc
|
International Harvester B-634 Dimensions
2WD Wheelbase: |
86.8 inches 220 cm
|
4WD Wheelbase: |
86.8 inches 220 cm
|
AWD Wheelbase: |
75 inches 190 cm
|
2WD Length: |
138 inches 350 cm
|
4WD Length: |
139 inches 353 cm
|
AWD Length: |
150 inches 381 cm
|
Width: |
65.5 inches 166 cm
|
Height (cab): |
96 inches 243 cm
|
2WD Front tread: |
52 to 61 inches 132 to 154 cm
|
4WD Front tread: |
53 to 66 inches 134 to 167 cm
|
AWD Front tread: |
60 to 80 inches 152 to 203 cm
|
2WD Rear tread: |
56 to 72 inches 142 to 182 cm
|
4WD Rear tread: |
56 to 72 inches 142 to 182 cm
|
AWD Rear tread: |
60 to 80 inches 152 to 203 cm
|
International Harvester B-634 Weight |
2WD Operating: |
6546 lbs 2969 kg
|
4WD Operating: |
7694 lbs 3489 kg
|
AWD Operating: |
9574 lbs 4342 kg
|
FAQ
Is International Harvester B-634 a good tractor?
The International Harvester B-634 is one of the great tractors in the International Harvester stable, and it has earned International Harvester a fantastic reputation.
How much oil does a International Harvester B-634 take?
Check out the International Harvester B-634 oil capacity and oil type in the engine specs section as it may vary across the engines. Keep in mind, that older models might have their oil capacity increased over time. You may compare between the early and late oil capacity.
Do tractors have VIN numbers?
Every tractor has a VIN number. The number is usually engraved below the driver’s seat. Tractor manufacturers put the number in different places on the tractor body.
What was the last year International Harvester made the ?
The International Harvester B-634 was an agricultural tractor model made from 1964 – 1976
|