International Harvester 384 Utility tractor Technical Specifications
International Harvester 384 is a Row-Crop tractor that was produced by the John Deere between 1977 – 1982.
Below you will find detailed technical specifications for International Harvester 384 covering engine types, horsepower ratings, weight, height, fuel type and tank volume, oil capacity and type, hydraulic system diagram, wiring diagram, battery specs, etc.
International Harvester 384 Production
Manufacturer: | |
Manufacturer: | International Harvester |
Type: | Utility tractor |
Factory: | Bradford, England |
Original price: | $9,500 (1982 ) |
Engine: | |
PTO (claimed): | 36 hp 26.8 kW |
International Harvester 384 Engine | |
International Harvester 2.5L 4-cyl diesel |
Mechanical | |
Chassis: | 4×2 2WD |
Cab: | Open operator station. |
Transmission: | 8-speed unsynchronized gear |
International Harvester 384 photos… |
Capacity | |
Fuel: | 12 gal 45.4 L |
Hydraulic system: | 9.3 gal 35.2 L |
Hydraulics | |
Type: | open center |
Capacity: | 9.3 gal 35.2 L |
Pump flow: | 7.8 gpm 29.5 lpm |
Tractor hitch | |
Rear Type: | I |
Rear lift: | 2600 lbs 1179 kg |
Power Take-off (PTO) | |
Rear RPM: | 540 (1.375) |
Dimensions & Tires | |
Wheelbase: | 76.5 inches 194 cm |
Weight: | 4236 lbs 1921 kg |
Front tire: | 6.00-16 |
Rear tire: | 13.6-28 |
Full dimensions and tires … |
384 Serial Numbers | |
Location: | clutch housing on right side |
1978: | 501 |
1979: | 1664 |
1980: | 2508 |
1981: | 3818 |
1982: | 4530 |
International Harvester 384 Electrical
Ground: | negative |
Charging amps: | 28 |
Battery CCA: | 605 |
Battery volts: | 12 |
International Harvester 384 Mechanical
Chassis: | 4×2 2WD | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Cab: | Open operator station. | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Transmission: | 8-speed unsynchronized gear | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Capacity
Hydraulics
Tracktor Hitch
Power Take-off (PTO)
Title serial numbers
What year is my International Harvester 384? Serial Number DecoderThe serial number list shows the first tractor built in each year. The other tractors for that year will have successively higher numbers. Your serial number should be between two of the stated numbers. The list only includes the numbers of the first tractors produced in each year. Your serial should be somewhere between two numbers.Unless you happen to be the first person to own a tractor, your number will not appear on the list. International Harvester 384 Engine detail
International Harvester 384 Dimensions
FAQIs International Harvester 384 a good tractor? The International Harvester 384 is one of the great tractors in the International Harvester stable, and it has earned International Harvester a fantastic reputation. How much oil does a International Harvester 384 take? Check out the International Harvester 384 oil capacity and oil type in the engine specs section as it may vary across the engines. Keep in mind, that older models might have their oil capacity increased over time. You may compare between the early and late oil capacity. Do tractors have VIN numbers? Every tractor has a VIN number. The number is usually engraved below the driver’s seat. Tractor manufacturers put the number in different places on the tractor body. What was the last year International Harvester made the 384? The International Harvester 384 was an agricultural tractor model made from 1977 – 1982 How much can a International Harvester 384 Pull? The max pulling capacity of the International Harvester 384 tractors starts at 2,561 lbs Where is the serial number on a International Harvester 384? Lookup clutch housing on right side |
Excellent site wanting to know how to match the international red and international white for touch ups. Do you know their formulas or specific names. Thanks, Barb