CaseIH Farmall 110C Utility tractor Specs & Features

Contents show

CaseIH Farmall 110C Utility tractor Technical Specifications

CaseIH Farmall 110C is a Row-Crop tractor that was produced by the John Deere between 2015 – .

Below you will find detailed technical specifications for CaseIH Farmall 110C covering engine types, horsepower ratings, weight, height, fuel type and tank volume, oil capacity and type, hydraulic system diagram, wiring diagram, battery specs, etc.

CaseIH Farmall 110C Production

Manufacturer:
Manufacturer:	CaseIH
Type:	Utility tractor
Original price:	$55,747 (2016 mech-shuttle ROPS 2WD )
Original price:	$80,543 (2016 Hi-Lo Cab 4WD )

CaseIH Farmall 110C Power

Engine:
Engine:	107 hp 79.8 kW
PTO (claimed):	93 hp 69.4 kW
Drawbar (tested):	73.4 hp 54.7 kW
PTO (tested):	96.0 hp 71.6 kW

CaseIH Farmall 110C Electrical

Ground:	negative
Charging system:	alternator
Battery volts:	12

CaseIH Farmall 110C Mechanical

Chassis:

4×2 2WD

4×4 MFWD 4WD

Final drives:

inboard planetary

Steering:

power

Brakes:

wet disc

Cab:

Two-post ROPS. Cab optional with air-conditioning.

Transmissions:

12-speed mechanical shuttle

12-speed power shuttle

24-speed

Hydraulics

Type:	open center
Valves:	2 or 3
Pump flow:	16..9 gpm 60.6 lpm

Tracktor Hitch

Rear Type:	II/I
Control:	top link draft sensing
Rear lift (at 24″/610mm):	4339 lbs 1968 kg
	5620 lbs 2549 kg *Optional
Rear Arms:	telescopic link ends
Drawbar:	swinging extendable drawbar

Power Take-off (PTO)

Rear PTO:	independent
Rear RPM:	540
	540/540E*Optional
	540/1000*Optional

CaseIH Farmall 110C Engine detail

Engine Detail
Fiat Powertrain Technologies (FPT)
wastegate turbocharged and aftercooled
4-cylinder
liquid-cooled
Displacement:	207 ci 3.4 L
Bore/Stroke:	3.90×4.33 inches 99 x 110 mm
Emissions:	Tier 4
Emission control:	selective catalytic reduction (SCR) with cooled exhaust-gas recirculation
Power:	107 hp 79.8 kW
Fuel system:	high pressure common rail electronic direct injection
Starter:	electric
Starter volts:	12

CaseIH Farmall 110C Transmission overview

Engine Oil

Type:	mechanical shuttle
Gears:	12 forward and reverse
Four synchronized gears in three non-synchronized ranges with mechanical shuttle shift.

CaseIH Farmall 110C Dimensions

2WD Wheelbase:	92.2 inches 234 cm
4WD Wheelbase:	90 inches 228 cm
2WD Length:	163.1 inches 414 cm
4WD Length:	160.1 inches 406 cm
Width:	75.7 inches 192 cm
Height (ROPS):	106.5 inches 270 cm
Height (cab):	102.1 inches 259 cm
Rear axle:	Flange

CaseIH Farmall 110C Weight
2WD ROPS :	6989 lbs 3170 kg
4WD ROPS :	7672 lbs 3480 kg
2WD Cab :	7474 lbs 3390 kg
4WD Cab :	8157 lbs 3700 kg

CaseIH Farmall 110C Tests

OCED Tractor Test 1134

OCED Tractor Test 1134
Diesel 12-speed 4WD April 2016 – 2016, Link: OCED Tractor Test 1134 file
PTO performance
Max power:	96.0 hp 71.6 kW
Fuel use:	5.4 gal/hour 20.4 l/hour
Power at rated engine speed:	87.6 hp 65.3 kW
Fuel use:	5.8 gal/hour 22.0 l/hour
Power at rated PTO speed:	95.9 hp 71.5 kW
Fuel use:	5.4 gal/hour 20.4 l/hour
Drawbar performance
Max power:	73.4 hp 54.7 kW
Fuel use:	5.1 gal/hour 19.3 l/hour
Gear 4M used for power test.
Max pull:	6895 lbs 3127 kg
Gear 2M used for pull test.

FAQ

Is CaseIH Farmall 110C a good tractor?

The CaseIH Farmall 110C is one of the great tractors in the CaseIH stable, and it has earned CaseIH a fantastic reputation.

How much oil does a CaseIH Farmall 110C take?

Check out the CaseIH Farmall 110C oil capacity and oil type in the engine specs section as it may vary across the engines. Keep in mind, that older models might have their oil capacity increased over time. You may compare between the early and late oil capacity.

Do tractors have VIN numbers?

Every tractor has a VIN number. The number is usually engraved below the driver’s seat. Tractor manufacturers put the number in different places on the tractor body.

What was the last year CaseIH made the Farmall 100C

The CaseIH Farmall 110C was an agricultural tractor model made from 2015 –