Challenger MT265B Compact Utility tractor Specs & Features

Contents show

Challenger MT265B Compact Utility tractor Technical Specifications

Challenger MT265B is a Row-Crop tractor that was produced by the John Deere between 2005 – 2008.

Below you will find detailed technical specifications for Challenger MT265B covering engine types, horsepower ratings, weight, height, fuel type and tank volume, oil capacity and type, hydraulic system diagram, wiring diagram, battery specs, etc.

Challenger MT265B Production

Manufacturer:
Distributor:	Challenger (a part of AGCO)
Manufacturer:	Iseki
Type:	Compact Utility tractor
Factory:	Matsuyama, Japan

Challenger MT265B Electrical

Ground:	negative
Charging system:	alternator
Charging amps:	40
Battery CCA:	630
Battery volts:	12

Challenger MT265B Mechanical

Chassis:

4×4 MFWD 4WD

Final drives:

spur gear

Differential lock:

mechanical rear

Steering:

power

Brakes:

wet disc

Cab:

Two-post foldable ROPS

Transmissions:

hydrostatic

8-speed

12-speed partially synchronized with power shuttle

Hydraulics

Type:	open center
Pressure:	2276 psi 156.9 bar
Rear valves:	2*Optional
Mid valves:	2*Optional
Pump flow:	8.3 gpm 31.4 lpm
Total flow:	12.7 gpm 48.1 lpm (sync shuttle)
	13.7 gpm 51.9 lpm (power shuttle/hydro)
Steering flow:	4.4 gpm 16.7 lpm (sync shuttle)
	5.4 gpm 20.4 lpm (power shuttle/hydro)
Steering press.:	2276 psi 156.9 bar

Tracktor Hitch

Rear Type:	I
Control:	position and response control
	optional top-link draft control
Rear lift (at ends):	2800 lbs 1270 kg
Rear lift (at 24″/610mm):	2535 lbs 1149 kg
Rear Arms:	fixed link ends ((sync shuttle)
	telescopic link ends (power shuttle/hydro)

Power Take-off (PTO)

Rear PTO:	independent
Clutch:	electro-hydraulic wet disc
Rear RPM:	540 (1.375)
Mid PTO:	independent*Optional
Mid RPM:	2000 (1.00)

Challenger MT265B Engine detail

Engine Detail
Iseki E3CD-VB40
diesel
3-cylinder
liquid-cooled
Displacement:	91.4 ci 1.5 L
Bore/Stroke:	3.43×3.30 inches 87 x 84 mm
Power (gross):	33.0 hp 24.6 kW
Fuel system:	indirect injection
Air cleaner:	dual-stage dry
Pre-heating:	glow plugs
Compression:	21.7:1
Rated RPM:	2600
Idle RPM:	980-2860
Starter volts:	12
Oil capacity:	5 qts 4.7 L
Coolant capacity:	7.1 qts 6.7 L

Challenger MT265B Transmission overview

Engine Oil

Type:	hydrostatic
Gears:	infinite (3-range) forward and reverse
Oil capacity:	32.8 qts 31.0 L

Challenger MT265B Dimensions

Wheelbase:	69.7 inches 177 cm
Length:	121 inches 307 cm
Width:	62.2 inches 157 cm *Minimum width
Height (ROPS):	87.4 inches 221 cm
Ground clearance:	14.1 inches 35 cm
Front tread:	45 inches 114 cm
Rear tread:	46.5 to 58.9 inches 118 to 149 cm

Challenger MT265B Weight
	3136 lbs 1422 kg
Max capacity:	6614 lbs 3000 kg
Max front axle:	3968 lbs 1799 kg
Max rear axle:	6968 lbs 3160 kg

FAQ

Is Challenger MT265B a good tractor?

The Challenger MT265B is one of the great tractors in the Iseki stable, and it has earned Iseki a fantastic reputation.

How much oil does a Challenger MT265B take?

Check out the Challenger MT265B oil capacity and oil type in the engine specs section as it may vary across the engines. Keep in mind, that older models might have their oil capacity increased over time. You may compare between the early and late oil capacity.

Do tractors have VIN numbers?

Every tractor has a VIN number. The number is usually engraved below the driver’s seat. Tractor manufacturers put the number in different places on the tractor body.

What was the last year Iseki made the MT255B

The Challenger MT265B was an agricultural tractor model made from 2005 – 2008