International Harvester 956 Row-Crop tractor Technical Specifications
International Harvester 956 is a Row-Crop tractor that was produced by the John Deere between 1982 – 1985.
Below you will find detailed technical specifications for International Harvester 956 covering engine types, horsepower ratings, weight, height, fuel type and tank volume, oil capacity and type, hydraulic system diagram, wiring diagram, battery specs, etc.
International Harvester 956 Production
Manufacturer: |
Manufacturer: |
International Harvester
|
Type: |
Row-Crop tractor
|
Factory: |
Neuss, Germany
|
International Harvester 956 Electrical
Ground: |
negative
|
Charging system: |
alternator
|
Charging amps: |
55
|
Battery volts: |
12
|
Battery AH: |
110
|
International Harvester 956 Mechanical
Chassis: |
4×2 2WD
|
|
4×4 MFWD 4WD
|
Final drives: |
planetary
|
Differential lock: |
mechanical rear
|
Steering: |
power
|
Cab: |
Four-post ROPS. Standard cab and deluxe XL cab optional.
|
Transmission: |
16-speed two-speed power shift
|
Capacity
Fuel: |
37 gal 140.0 L
|
Hydraulic system: |
12.2 gal 46.2 L
|
Hydraulics
Type: |
open center
|
Capacity: |
12.2 gal 46.2 L
|
Pressure: |
2346 psi 161.8 bar
|
Pump flow: |
11.1 gpm 42.0 lpm
|
Tracktor Hitch
Rear Type: |
II
|
Control: |
position and draft control
|
Rear lift (at ends): |
9171 lbs 4159 kg
|
|
11023 lbs 5000 kg *Optional
|
Power Take-off (PTO)
Rear PTO: |
independent
|
Clutch: |
310mm dry disc
|
Rear RPM: |
540/1000
|
Engine RPM: |
540@1920 1000@2000
|
International Harvester 956 Engine detail
Engine Detail |
International Harvester D-358 |
diesel |
6-cylinder |
liquid-cooled |
Displacement: |
358 ci 5.9 L
|
Bore/Stroke: |
3.875×5.0625 inches 98 x 129 mm
|
Fuel system: |
direct injection
|
Air cleaner: |
dry
|
Rated RPM: |
2200
|
Torque: |
250 lb-ft 339.0 Nm
|
Torque RPM: |
1400
|
Starter volts: |
12
|
Oil capacity: |
12.7 qts 12.0 L
|
Coolant capacity: |
25.4 qts 24.0 L
|
Engine Oil |
International Harvester 956 Transmission overview
Type: |
two-speed power shift
|
Gears: |
16 forward and 8 reverse
|
Clutch: |
310mm cerametallic disc
|
International Harvester 956 Dimensions
2WD Wheelbase: |
103.4 inches 262 cm
|
4WD Wheelbase: |
101.9 inches 258 cm
|
2WD Length: |
165 inches 419 cm
|
4WD Length: |
166.5 inches 422 cm
|
Width: |
91 inches 231 cm
|
Height (cab): |
108 inches 274 cm
|
2WD Cab Weight: |
9458 lbs 4290 kg
|
4WD Cab Weight: |
10538 lbs 4780 kg
|
4WD Clearance (front axle): |
15 inches 38 cm
|
2WD Front tread: |
59 to 71 inches 149 to 180 cm
|
4WD Front tread: |
64 to 75 inches 162 to 190 cm
|
Rear tread: |
67 to 87 inches 170 to 220 cm
|
FAQ
Is International Harvester 956 a good tractor?
The International Harvester 956 is one of the great tractors in the International Harvester stable, and it has earned International Harvester a fantastic reputation.
How much oil does a International Harvester 956 take?
Check out the International Harvester 956 oil capacity and oil type in the engine specs section as it may vary across the engines. Keep in mind, that older models might have their oil capacity increased over time. You may compare between the early and late oil capacity.
Do tractors have VIN numbers?
Every tractor has a VIN number. The number is usually engraved below the driver’s seat. Tractor manufacturers put the number in different places on the tractor body.
What was the last year International Harvester made the 956?
The International Harvester 956 was an agricultural tractor model made from 1982 – 1985
|