J.I. Case 1031 Row-Crop tractor Technical Specifications
J.I. Case 1031 is a Row-Crop tractor that was produced by the John Deere between 1966 – 1969.
Below you will find detailed technical specifications for J.I. Case 1031 covering engine types, horsepower ratings, weight, height, fuel type and tank volume, oil capacity and type, hydraulic system diagram, wiring diagram, battery specs, etc.
J.I. Case 1031 Production
| Manufacturer: | |
| Manufacturer | J.I. Case |
| Row-Crop tractor | |
| Built in Racine, Wisconsin, USA | |
| Total built | 13,763 (all types) |
| Original price | $10,300 (1969) |
| The Case 1030 series was composed of the model 1031 General-Purpose and the 1032 Western Special. There was, technically, no model code 1030, although all tractors carried a 1030 decal on the hood. The model code was stamped onto the serial number plate. | |
| Engine: | 88.34 hp 65.9 kW |
| PTO (tested) | 101.79 hp 75.9 kW |
J.I. Case 1031 Mechanical
| Two-wheel drive | |
| Steering | power |
| Disc brakes | |
| Open operator station. | |
Hydraulics
| Valves | 2 |
| Pump flow | 12 gpm 45.4 lpm |
Tracktor Hitch
| Rear Type | 2 |
Power Take-off (PTO)
| Rear PTO | independent |
| Rear RPM | 540 |
| 1000 | |
| Engine RPM | 1000@1700 |
J.I. Case 1031 Engine detail
| Engine Detail | |
| J.I. Case | |
| diesel | |
| 6-cylinder | |
| liquid-cooled | |
| Displacement | 451 ci 7.4 L |
| Bore/Stroke | 4.375×5.00 inches 111 x 127 mm |
| Air cleaner | dry |
| Compression | 15:1 |
| Rated RPM | 2000 |
| Starter volts | 12 |
| Oil capacity | 14 qts 13.2 L |
| Coolant capacity | 40 qts 37.9 L |
| Engine Oil | |||
| Transmission | Case-o-matic |
| Gears | 8 forward and 2 reverse |
| Four gears (1-4) in two ranges (low/high). Transmission problems led to the introduction of a transmission oil cooler in 1967. | |
J.I. Case 1031 Dimensions
| Wheelbase | 109 inches 276 cm |
| Length | 165 inches 419 cm |
| Width | 88 inches 223 cm |
| Height (steering wheel) | 87 inches 220 cm |
| Height (hood) | 72 inches 182 cm |
| Operating weight | 9,335 lbs 4234 kg |
| Ballasted weight | 16,220 lbs 7357 kg |
| Ground clearance | 16 inches 40 cm |
| Front tread | 56 to 81 inches 142 to 205 cm |
| Rear tread | 76 to 92 inches 193 to 233 cm |
J.I. Case 1031 Tests
| Nebraska Tractor Test 952 | |
| Diesel 8-speed 2WD November 2 – 5, 1966 Link: Nebraska Tractor Test 952 file | |
| PTO performance | |
| Power at rated engine speed | 101.79 hp 75.9 kW |
| Fuel use | 7.7 gal/hour 29.1 l/hour |
| Power at rated PTO speed | 93.15 hp 69.5 kW |
| Fuel use | 6.8 gal/hour 25.7 l/hour |
| Drawbar performance | |
| Max power | 88.34 hp 65.9 kW |
| Fuel use | 7.6 gal/hour 28.8 l/hour |
| Gear 4 used for power test. | |
| Max pull | 12,056 lbs 5468 kg |
| Gear 2 used for pull test. | |
FAQ
Is J.I. Case 1031 a good tractor?
The J.I. Case 1031 is one of the great tractors in the J.I. Case stable, and it has earned J.I. Case a fantastic reputation.
How much oil does a J.I. Case 1031 take?
Check out the J.I. Case 1031 oil capacity and oil type in the engine specs section as it may vary across the engines. Keep in mind, that older models might have their oil capacity increased over time. You may compare between the early and late oil capacity.
Do tractors have VIN numbers?
Every tractor has a VIN number. The number is usually engraved below the driver’s seat. Tractor manufacturers put the number in different places on the tractor body.
What was the last year J.I. Case made the ?
The J.I. Case 1031 was an agricultural tractor model made from 1966 – 1969
How much horsepower is a J.I. Case 1031?
The engine tested at 88.34 hp
65.9 kW drawbar and 101.79 hp
75.9 kW kW PTO horsepower.
How much does a J.I. Case 1031 tractor weight?
Depending on the engine type, the J.I. Case 1031 weight ranges from 9,335 lbs
4234 kg .
How much can a J.I. Case 1031 Pull?
The max pulling capacity of the J.I. Case 1031 tractors starts at 12,056 lbs
5468 kg but may be slightly higher depending on the trim.