J.I. Case 301 Row-Crop tractor Technical Specifications
J.I. Case 301 is a Row-Crop tractor that was produced by the John Deere between 1956 – 1958.
Below you will find detailed technical specifications for J.I. Case 301 covering engine types, horsepower ratings, weight, height, fuel type and tank volume, oil capacity and type, hydraulic system diagram, wiring diagram, battery specs, etc.
J.I. Case 301 Production
Manufacturer: | |
Manufacturer | J.I. Case |
Row-Crop tractor | |
Built in Rock Island, Illinois, USA | |
Total built | 905 |
Original price | $3,600 (1958) |
Engine: | 26.31 hp 19.6 kW |
Belt (tested) | 30.80 hp 23.0 kW |
J.I. Case 301 Mechanical
Two-wheel drive | |
Steering | manual |
6-inch disc brakes | |
Open operator station. |
Hydraulics
Type | Duo-Control |
Valves | 1 (optional) |
Tracktor Hitch
Type | Case Eagle Hitch |
Power Take-off (PTO)
Rear PTO | transmission (4-speed) |
live (Tripl-Range) | |
Rear RPM | 540 |
J.I. Case 301 Engine detail
Engine Detail | |
Continental GD157 | |
diesel | |
4-cylinder | |
liquid-cooled vertical I-head | |
Displacement | 157 ci 2.6 L |
Bore/Stroke | 3.375×4.375 inches 86 x 111 mm |
Air cleaner | oil bath |
Pre-heating | ether |
Compression | 15.5:1 |
Rated RPM | 1750 |
Starter volts | 12 |
Coolant capacity | 12 qts 11.4 L |
Engine Oil |
Type | sliding gear |
Gears | 4 forward and 1 reverse |
Clutch | 234.9mm dry disc |
J.I. Case 301 Dimensions
Tricycle Wheelbase | 84.3 inches 214 cm |
Wide front Wheelbase | 79.7 inches 202 cm |
Tricycle Length | 131 inches 332 cm |
Wide-front Length | 125 inches 317 cm |
Height | 61 inches 154 cm |
Operating weight | 3,750 lbs 1701 kg |
Ballasted weight | 6,161 lbs 2794 kg |
Ground clearance | 21 inches 53 cm |
Front tread | 6.4.11.7 to inches 16 to 0 cm (tricycle) |
Front tread | 52 to 80 inches 132 to 203 cm (wide-front) |
Rear tread | 48 to 88 inches 121 to 223 cm |
J.I. Case 301 Tests
Nebraska Tractor Test 614 | |
Diesel 4-speed 2WD April 15 – 23, 1957 Link: Nebraska Tractor Test 614 file | |
Belt power (max) | 30.80 hp 23.0 kW |
Belt fuel use (max) | 2.2 gal/hour 8.3 l/hour |
Drawbar performance | |
Max power | 26.31 hp 19.6 kW |
Gear 3 used for power test. | |
Max pull | 4,067 lbs 1844 kg |
Gear 1 used for pull test. |
FAQ
Is J.I. Case 301 a good tractor?
The J.I. Case 301 is one of the great tractors in the J.I. Case stable, and it has earned J.I. Case a fantastic reputation.
How much oil does a J.I. Case 301 take?
Check out the J.I. Case 301 oil capacity and oil type in the engine specs section as it may vary across the engines. Keep in mind, that older models might have their oil capacity increased over time. You may compare between the early and late oil capacity.
Do tractors have VIN numbers?
Every tractor has a VIN number. The number is usually engraved below the driver’s seat. Tractor manufacturers put the number in different places on the tractor body.
What was the last year J.I. Case made the ?
The J.I. Case 301 was an agricultural tractor model made from 1956 – 1958
How much does a J.I. Case 301 tractor weight?
Depending on the engine type, the J.I. Case 301 weight ranges from 3,750 lbs
1701 kg .
How much can a J.I. Case 301 Pull?
The max pulling capacity of the J.I. Case 301 tractors starts at 4,067 lbs
1844 kg but may be slightly higher depending on the trim.