J.I. Case 930 Standard-tread tractor Technical Specifications
J.I. Case 930 is a Row-Crop tractor that was produced by the John Deere between 1960 – 1969.
Below you will find detailed technical specifications for J.I. Case 930 covering engine types, horsepower ratings, weight, height, fuel type and tank volume, oil capacity and type, hydraulic system diagram, wiring diagram, battery specs, etc.
J.I. Case 930 Production
Manufacturer: | |
Manufacturer | J.I. Case |
Standard-tread tractor | |
Built in Racine, Wisconsin, USA | |
Original price was $6,700 in 1969 | |
The 930 Comfort King (930 CK) was introduced in 1962. |
Engine: | 70.93 hp 52.9 kW |
PTO (tested) | 80.65 hp 60.1 kW |
J.I. Case 930 Mechanical
Two-wheel drive | |
Steering | power assist |
Differential mechanical dry disc brakes | |
Open operator station. |
Hydraulics
Type | Dual-Control |
Valves | 1 or 2 |
Pump flow | 15 gpm 56.8 lpm |
Power Take-off (PTO)
Rear PTO | independent |
Rear RPM | 540/1000 (1.375) |
J.I. Case 930 Engine detail
Engine Detail | |
J.I. Case | |
diesel | |
6-cylinder | |
liquid-cooled | |
Displacement | 401 ci 6.6 L |
Bore/Stroke | 4.125×5.00 inches 105 x 127 mm |
Compression | 15.2:1 |
Rated RPM | 1600 (early) |
1800 (late) | |
Firing order | 1-5-3-6-2-4 |
Starter volts | 12 |
Engine Oil |
Type | gear |
Gears | 6 forward and 1 reverse |
Clutch | hand-operated disc |
J.I. Case 930 Dimensions
Wheelbase | 84 inches 213 cm |
Length | 141 inches 358 cm |
Width | 84 inches 213 cm |
Height (hood) | 64.25 inches 163 cm |
Operating weight | 8,850 lbs 4014 kg |
Ballasted weight | 15,105 lbs 6851 kg |
Front tread | 57 inches 144 cm |
Rear tread | 67.5 inches 171 cm |
J.I. Case 930 Tests
Nebraska Tractor Test 741 | |
Diesel 6-speed 2WD April 14 – May 5, 1960 Link: Nebraska Tractor Test 741 file | |
PTO performance | |
Power at rated engine speed | 80.65 hp 60.1 kW |
Fuel use | 5.3 gal/hour 20.1 l/hour |
Power at rated PTO speed | 79.10 hp 59.0 kW |
Fuel use | 5.2 gal/hour 19.7 l/hour |
Drawbar performance | |
Max power | 70.93 hp 52.9 kW |
Fuel use | 5.4 gal/hour 20.4 l/hour |
Gear 3 used for power test. | |
Max pull | 10964 lbs 4973 kg |
Gear 1 used for pull test. |
FAQ
Is J.I. Case 930 a good tractor?
The J.I. Case 930 is one of the great tractors in the J.I. Case stable, and it has earned J.I. Case a fantastic reputation.
How much oil does a J.I. Case 930 take?
Check out the J.I. Case 930 oil capacity and oil type in the engine specs section as it may vary across the engines. Keep in mind, that older models might have their oil capacity increased over time. You may compare between the early and late oil capacity.
Do tractors have VIN numbers?
Every tractor has a VIN number. The number is usually engraved below the driver’s seat. Tractor manufacturers put the number in different places on the tractor body.
What was the last year J.I. Case made the ?
The J.I. Case 930 was an agricultural tractor model made from 1960 – 1969
How much horsepower is a J.I. Case 930?
The engine tested at 70.93 hp
52.9 kW drawbar and 80.65 hp
60.1 kW kW PTO horsepower.
How much does a J.I. Case 930 tractor weight?
Depending on the engine type, the J.I. Case 930 weight ranges from 8,850 lbs
4014 kg .
How much can a J.I. Case 930 Pull?
The max pulling capacity of the J.I. Case 930 tractors starts at 10964 lbs
4973 kg but may be slightly higher depending on the trim.