John Deere 1025R

John Deere 1025R Sub-Compact Utility tractor Technical Specifications

John Deere 1025R is a Row-Crop tractor that was produced by the John Deere between 2013 – .

Below you will find detailed technical specifications for John Deere 1025R covering engine types, horsepower ratings, weight, height, fuel type and tank volume, oil capacity and type, hydraulic system diagram, wiring diagram, battery specs, etc.

John Deere 1025R Production

















Manufacturer:
Manufacturer: John Deere
Type: Sub-Compact Utility tractor
Factory: Augusta, Georgia, USA
Original price: $13,361 (2013 )
Original price: $14,301 (2019 )


John Deere 1025R Power






Engine:
Engine: 23.8 hp
17.7 kW
PTO (claimed): 18 hp
13.4 kW







John Deere 1025R Engine
Yanmar 1.3L 3-cyl diesel


























Mechanical
Chassis: 4×4 MFWD 4WD
Final drives: spur gear
Differential lock: rear standard
Steering: power
Brakes: wet disc
Cab: Two-post foldable ROPS on semi-flat platform.
Transmission: hydrostatic




John Deere 1025R photos…













Capacity
Fuel: 5.6 gal
21.2 L
Hydraulic system: 3.25 gal
12.3 L
Front axle: 2.5 qts
2.4 L

























Hydraulics
Type: open center
Capacity: 3.25 gal
12.3 L
Pressure: 2000 psi
137.9 bar
Valves: 2 or 3
Pump flow: 3.5 gpm
13.2 lpm
Total flow: 6.3 gpm
23.8 lpm
Steering flow: 2.8 gpm
10.6 lpm













Tractor hitch
Rear Type: 1 (limited)
Control: position control
Rear lift (at 24″/610mm): 681 lbs
308 kg



















Power Take-off (PTO)
Rear PTO: independent
Clutch: wet disc
Rear RPM: 540
Mid PTO: independent
Mid RPM: 2100











Dimensions & Tires
Wheelbase: 57.1 inches
145 cm
Weight: 1444 lbs
654 kg








1025R Serial Numbers
Location: Serial number plate on the right side of the 1025R frame, above the front axle.

John Deere 1025R Electrical










Ground: negative
Battery CCA: 500
Battery volts: 12

John Deere 1025R Mechanical
























Chassis: 4×4 MFWD 4WD
Final drives: spur gear
Differential lock: rear standard
Steering: power
Brakes: wet disc
Cab: Two-post foldable ROPS on semi-flat platform.
Transmission: hydrostatic

Capacity










Fuel: 5.6 gal
21.2 L
Hydraulic system: 3.25 gal
12.3 L
Front axle: 2.5 qts
2.4 L

Hydraulics






















Type: open center
Capacity: 3.25 gal
12.3 L
Pressure: 2000 psi
137.9 bar
Valves: 2 or 3
Pump flow: 3.5 gpm
13.2 lpm
Total flow: 6.3 gpm
23.8 lpm
Steering flow: 2.8 gpm
10.6 lpm

Tracktor Hitch










Rear Type: 1 (limited)
Control: position control
Rear lift (at 24″/610mm): 681 lbs
308 kg

Power Take-off (PTO)
















Rear PTO: independent
Clutch: wet disc
Rear RPM: 540
Mid PTO: independent
Mid RPM: 2100

Title serial numbers






Location: Serial number plate on the right side of the 1025R frame, above the front axle.

photo of 1025R serial number

What year is my John Deere 1025R? Serial Number Decoder

The serial number list shows the first tractor built in each year. The other tractors for that year will have successively higher numbers. Your serial number should be between two of the stated numbers.

The list only includes the numbers of the first tractors produced in each year. Your serial should be somewhere between two numbers.Unless you happen to be the first person to own a tractor, your number will not appear on the list.

John Deere 1025R Engine detail
































































Engine Detail
Yanmar 3TNV80
diesel
3-cylinder
liquid-cooled
Displacement: 77.2 ci
1.3 L
Bore/Stroke: 3.15×3.31 inches
80 x 84 mm
Emissions: Tier 4
Power: 23.8 hp
17.7 kW
Fuel system: indirect injection
Air cleaner: dry
Pre-heating: glow plugs
  block heater*Optional
  coolant heater*Optional
Compression: 23.5:1
Rated RPM: 3200
Operating RPM: 1575-3370
Torque: 40.7 lb-ft
55.2 Nm
Torque RPM: 3200
Starter: electric
Starter volts: 12
Starter power: 1.6 hp
1.2 kW
Coolant capacity: 3.9 qts
3.7 L



John Deere 1025R Transmission overview

Engine Oil









Type: hydrostatic
Gears: infinite (2-range) forward and reverse
Oil capacity: 13 qts
12.3 L

John Deere 1025R Dimensions





































Wheelbase: 57.1 inches
145 cm
Length: 87.6 inches
222 cm
  102.6 inches
260 cm (with hitch)
  177 inches
449 cm (loader-backhoe)
Width: 47.2 inches
119 cm (R3 tires) 47.3 (R4 tires)
Height (hood): 41.5 inches
105 cm
Height (ROPS): 86.2 inches
218 cm
Shipping weight: 1444 lbs
654 kg
Clearance (front axle): 7.7 inches
19 cm
Rear axle: Flanged
Front tread: 32.2 inches
81 cm
Rear tread: 35.2 inches
89 cm

FAQ

Is John Deere 1025R a good tractor?

The John Deere 1025R is one of the great tractors in the John Deere stable, and it has earned John Deere a fantastic reputation.

How much oil does a John Deere 1025R take?

Check out the John Deere 1025R oil capacity and oil type in the engine specs section as it may vary across the engines. Keep in mind, that older models might have their oil capacity increased over time. You may compare between the early and late oil capacity.

Do tractors have VIN numbers?

Every tractor has a VIN number. The number is usually engraved below the driver’s seat. Tractor manufacturers put the number in different places on the tractor body.

What was the last year John Deere made the 1025R?

The John Deere 1025R was an agricultural tractor model made from 2013 –

How much can a John Deere 1025R Pull?

The max pulling capacity of the John Deere 1025R tractors starts at 7,484 lbs
3394 kg but may be slightly higher depending on the trim.

Where is the serial number on a John Deere 1025R?

Lookup serial number plate on the right side of the 1025r frame, above the front axle.

Leave a Comment