John Deere 2010C Technical Specifications
John Deere 2010C is a Row-Crop tractor that was produced by the John Deere between 1960 – 1965.
Below you will find detailed technical specifications for John Deere 2010C covering engine types, horsepower ratings, weight, height, fuel type and tank volume, oil capacity and type, hydraulic system diagram, wiring diagram, battery specs, etc.
John Deere 2010C Production
| Manufacturer: | |
| Manufacturer | John Deere |
| Agricultural Crawler tractor | |
| Built in Dubuque, Iowa, USA | |
| Engine: | 39.08 hp 29.1 kW |
| PTO (tested) | 47.72 hp 35.6 kW |
John Deere 2010C Electrical
| Ground | negative |
| Battery volts | 12 |
John Deere 2010C Mechanical
| Drive | crawler |
| Steering | multiple disc clutches |
| Contracting band brakes | |
| Open operator station. Optional ROPS canopy. | |
Power Take-off (PTO)
| Rear RPM | 540,1000 |
John Deere 2010C Engine detail
| Engine Detail | |
| John Deere | |
| gasoline | |
| 4-cylinder | |
| liquid-cooled | |
| Displacement | 144.5 ci 2.4 L |
| Bore/Stroke | 3.625×3.50 inches 92 x 89 mm |
| Air cleaner | oil bath |
| Compression | 7.9:1 |
| Rated RPM | 2500 |
| Starter volts | 12 |
| Engine Oil | |||
| Gears | 8 forward and 4 reverse |
| Clutch | dry disc |
John Deere 2010C Dimensions
| Length | 112.6 inches 286 cm |
| Width | 61.25 inches 155 cm |
| Height (hood) | 54.1 inches 137 cm |
| Height (exhaust) | 72.875 inches 185 cm |
| Gauge | 48 inches 121 cm |
| John Deere 2010C Weight | |
| Shipping | 8387 lbs (gas) 3804 kg |
| 8492 lbs (diesel) 3851 kg | |
| Operating | 9550 lbs (gas, no blade) 4331 kg |
| 9645 lbs (diesel, no blade) 4374 kg | |
John Deere 2010C Tests
| Nebraska Tractor Test 829 | |
| Gasoline 8-speed crawler October 19 – 31, 1962 Link: Nebraska Tractor Test 829 file | |
| PTO performance | |
| Power at rated engine speed | 47.45 hp 35.4 kW |
| Fuel use | 4.0 gal/hour 15.1 l/hour |
| Power at rated PTO speed | 38.57 hp 28.8 kW |
| Fuel use | 3.2 gal/hour 12.1 l/hour |
| Drawbar performance | |
| Max power | 38.86 hp 29.0 kW |
| Fuel use | 4.1 gal/hour 15.5 l/hour |
| Gear 3 used for power test. | |
| Max pull | 10,093 lbs 4578 kg |
| Gear 1 used for pull test. | |
| Nebraska Tractor Test 830 | |||
| Nebraska Tractor Test 830 | |
| Diesel 8-speed crawler October 23 – 31, 1962 Link: Nebraska Tractor Test 830 file | |
| PTO performance | |
| Power at rated engine speed | 47.72 hp 35.6 kW |
| Fuel use | 3.4 gal/hour 12.9 l/hour |
| Power at rated PTO speed | 47.72 hp 35.6 kW |
| Fuel use | 3.4 gal/hour 12.9 l/hour |
| Drawbar performance | |
| Max power | 39.08 hp 29.1 kW |
| Fuel use | 3.4 gal/hour 12.9 l/hour |
| Gear 3 used for power test. | |
| Max pull | 10,283 lbs 4664 kg |
| Gear 1 used for pull test. | |
FAQ
Is John Deere 2010C a good tractor?
The John Deere 2010C is one of the great tractors in the John Deere stable, and it has earned John Deere a fantastic reputation.
How much oil does a John Deere 2010C take?
Check out the John Deere 2010C oil capacity and oil type in the engine specs section as it may vary across the engines. Keep in mind, that older models might have their oil capacity increased over time. You may compare between the early and late oil capacity.
Do tractors have VIN numbers?
Every tractor has a VIN number. The number is usually engraved below the driver’s seat. Tractor manufacturers put the number in different places on the tractor body.
What was the last year John Deere made the ?
The John Deere 2010C was an agricultural tractor model made from 1960 – 1965
How much horsepower is a John Deere 2010C?
The engine tested at 39.08 hp
29.1 kW drawbar and 47.72 hp
35.6 kW kW PTO horsepower.
How much does a John Deere 2010C tractor weight?
Depending on the engine type, the John Deere 2010C weight ranges from 8387 to 9645 pounds .
How much can a John Deere 2010C Pull?
The max pulling capacity of the John Deere 2010C tractors starts at 10,093 lbs
4578 kg but may be slightly higher depending on the trim.