Massey Ferguson 7614 Row-Crop tractor Technical Specifications
Massey Ferguson 7614 is a Row-Crop tractor that was produced by the John Deere between 2013 – 2014.
Below you will find detailed technical specifications for Massey Ferguson 7614 covering engine types, horsepower ratings, weight, height, fuel type and tank volume, oil capacity and type, hydraulic system diagram, wiring diagram, battery specs, etc.
Massey Ferguson 7614 Production
Manufacturer: |
Manufacturer: |
Massey Ferguson (a part of AGCO)
|
Type: |
Row-Crop tractor
|
Factory: |
Beauvais, France
|
Massey Ferguson 7614 Electrical
Ground: |
negative
|
Charging system: |
alternator
|
Charging amps: |
120
|
|
175 (option)
|
|
240 (dual 120 option)
|
Batteries: |
2
|
Battery volts: |
12
|
Massey Ferguson 7614 Mechanical
Chassis: |
4×4 MFWD 4WD
|
Final drives: |
inboard planetary
|
Differential lock: |
electro-hydraulic standard
|
Steering: |
hydrostatic power
|
Brakes: |
hydraulic wet disc
|
Trailer brakes: |
hydraulic (optional)
|
|
pneumatic (optional)
|
Cab: |
Cab standard. Optional hydraulic OptiRide cab suspension. AGCOCOMMAND (optional)
|
|
Auto-Guide 3000 (optional)
|
Transmission: |
16-speed four-speed power shift
|
Capacity
Fuel: |
82 gal 310.4 L
|
Exhaust fluid (DEF): |
8 gal 30.3 L
|
Hydraulic system: |
26.4 gal 99.9 L
|
Hydraulics
Type: |
closed-center load sensing (CCLS)
|
|
open center*Optional
|
Capacity: |
26.4 gal 99.9 L
|
Pressure: |
2900 psi 200.0 bar
|
Valves: |
3 (mechanical)
|
|
4 (2 mech, 2 elec)
|
|
4 (electric)
|
SCV flow: |
24.3 gpm 92.0 lpm
|
Total flow: |
29 gpm 109.8 lpm
|
Tracktor Hitch
Rear Type: |
III
|
Control: |
electronic lower link draft sensing
|
Rear lift (at ends): |
9800 lbs 4445 kg
|
Front Hitch: |
optional
|
Drawbar: |
Cat. II with drop pin
|
Power Take-off (PTO)
Rear PTO: |
independent
|
Clutch: |
electro-hydraulic
|
Rear RPM: |
540/1000 (1.375)
|
|
540/540E/1000 (1.375)
|
|
540/540E/1000/1000E (1.375)
|
Engine RPM: |
540@1980 540E@1533 1000@2030 1000E@1572
|
Massey Ferguson 7614 Engine detail
Engine Detail |
Sisu |
turbocharged air-to-air aftercooled diesel |
6-cylinder 24-valve |
liquid-cooled |
Displacement: |
402.5 ci 6.6 L
|
Bore/Stroke: |
4.252×4.724 inches 108 x 120 mm
|
Emissions: |
Interim Tier IV
|
Emission control: |
selective catalytic reduction (SCR)
|
Fuel system: |
electronic high-pressure common rail
|
Pre-heating: |
thermostart
|
Compression: |
17.4:1
|
Rated RPM: |
2100
|
Starter: |
electric
|
Starter volts: |
12
|
Engine Oil |
Massey Ferguson 7614 Transmission overview
Transmission: |
Dyna-4
|
Type: |
four-speed power shift
|
Gears: |
16 forward and reverse
|
Four power shift gears in four ranges. |
Massey Ferguson 7614 Dimensions
Wheelbase: |
113.1 inches 287 cm
|
Length: |
192.8 inches 489 cm
|
Height (cab): |
117.4 inches 298 cm
|
|
120.7 inches 306 cm (AutoGuide)
|
Front axle: |
4WD
|
Front axle: |
QuadLink Suspended 4WD
|
Rear axle: |
Flange: 72.24 inch length 1834 mm
|
Rear axle: |
Bar: 79.84 inch length 2027 mm
|
Rear axle: |
Long bar: 105.2 inch length 2672 mm
|
Massey Ferguson 7614 Weight |
Shipping: |
15060 lbs 6831 kg
|
Max capacity: |
20393 lbs 9250 kg
|
Max Drawbar: |
3527 lbs 1599 kg
|
FAQ
Is Massey Ferguson 7614 a good tractor?
The Massey Ferguson 7614 is one of the great tractors in the Massey Ferguson (a part of AGCO) stable, and it has earned Massey Ferguson (a part of AGCO) a fantastic reputation.
How much oil does a Massey Ferguson 7614 take?
Check out the Massey Ferguson 7614 oil capacity and oil type in the engine specs section as it may vary across the engines. Keep in mind, that older models might have their oil capacity increased over time. You may compare between the early and late oil capacity.
Do tractors have VIN numbers?
Every tractor has a VIN number. The number is usually engraved below the driver’s seat. Tractor manufacturers put the number in different places on the tractor body.
What was the last year Massey Ferguson (a part of AGCO) made the 7614?
The Massey Ferguson 7614 was an agricultural tractor model made from 2013 – 2014
|